Top Sellers
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
|
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
|
|
Air Filter for Detroit Diesel Engines 671 Natural/Turbo, 8V71 Natural, 12V71 2 Turbo, 6V92 2 Turbo, 8V92 1 Turbo/2 Turbo, 12V92 Natural, All HP, Tapered, 9" x 9" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).
|
Air Filter for Caterpillar Engine 3116, Detroit Diesel Engines 6V92 1 Turbo, 12V92 2 Turbo, All HP, Tapered, 9" x 12" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).
|
Genset AIRSEP® Air Filter from WALKER ENGINEERING
Keep your Genset AIRSEP system running in peak condition with this washable replacement air filter element. Rated for 250 hours between filter cleanings. Washable replacement air filter.
|
Fuel Filter Primer Pump Kit from RACOR-PARKER FILTRAT
Prime your fuel line reliably every timeRetrofit this kit to most Racor 1000 or 900 series fuel filters, and you can easily reprime your filter and fuel system. Activate a switch, and fuel is drawn into the pre-screen and pumped through the housing, re-filling the unit. When not in use, the filter pump is bypassed and the fuel/water separator system functions normally. Assembly is only 3. 3" tall .
|
P-Trap Fuel Surge Protector from ATTWOOD
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.
|
Impeller Kit 09959K from WICOR/SHERWOOD
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.
|
10077K REPL IMPELLER KIT from WICOR/SHERWOOD
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.
|
17000K REPL IMPELLER KIT from WICOR/SHERWOOD
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.
|
Impeller Kit 9000K from WICOR/SHERWOOD
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.
|
Impeller Kit 8000K from WICOR/SHERWOOD
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.
|
Princess Propane Range - 3-Burner from SEAWARD PRODUCTS
These Seaward ranges were rated #1 by Practical Sailor and Powerboat Reports. They feature stainless-steel construction and fuel lines, AGA approved thermocouple valves that shut off in case burners are extinguished, and piezo electric ignition that needs no electrical hookup. Safety clips secure range tops to eliminate rattling. Thermostatically-controlled 8000 Btu ceramic oven maintains steady temperature, distributes heat evenly, makes cleaning easy and conserves fuel. Built to ANSI Z. 21.
|
|
FUELSEP® Fuel Line Jumpers & 90° Fitting Kits, Walker Engineering Fuelsep® Fuel Line Jumpers & 90° Fitting Kits
|
|
Home -> Engine Systems -> Engine Parts->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FKS75-10
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FKS75-8
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FKS75-6
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FKS75-12
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FLK20-6
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FLK20-8
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FLK20-12
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FLK20-10
|
|
|
