Top Sellers
Large Parts Kit - 4 Hinges, 2 Latch Sets, 1 med Lid Strap, 2 Handles & Brackets, 1 threaded drain plug from IGLOO
West Marine stocks hard-to-find replacement parts and cooler accessories. Includes 4 hinges and 2 latch sets, 1 med.
|
Adventure 14 Two-Person Canoe from MAD RIVER CANOE
Its rotomolded construction requires no maintenance and has a durable outer skin for extra endurance and UV protection. The multi-chine hull is stable, rigid and provides tracking for easier handling and performance. Ergonomic contoured padded seats with fully adjustable backrests, center bench seat, molded trays, two mesh pockets, stern drain plug and contoured padded easy carry handles. Application: Solo/tandem recreational, fishing, touring Length: 14' Boat Beam: 38" Weight: 75lb.
|
Replacement Element for Mercury Inboards/Outboards, No Bowl from RACOR-PARKER FILTRAT
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
|
Full-Flow In-Line Ball Valve, 1-1/2" NPT from GROCO
These in-line ball valves permit unrestricted flow in all sizes. Each features a compact bronze body, chrome-plated brass ball with Teflon seats for long life, 304 stainless steel handle, bonding attachment screw and a drain plug.
|
Full-Flow Flanged Bronze Seacock, 2" Pipe Size from GROCO
Components include 316 stainless steel, full-flow ball, PTFE seals and seats, all bronze castings and a patented reversing handle that facilitates installation and use in cramped locations. Includes bonding wire attachment and drain plug on each side of body. Top fitting is NPT and bottom is NPS.
|
FT325 Fishmaster Inflatable Boat from SEVYLOR
Get out on the lakeDesigned by fishermen, this boat is very practical due to its double hull construction which makes it very rugged and rigid. Accepts a 3 HP gas motor at the stern, removable inner hull, slatted roll up floor, gear pouch, inflatable removable rowing seats, swivel oarlocks, oar holders, mooring ring, fishing rod holder, water drain plugs, grab line and a nylon carry bag. LOA - 10’3” . Beam - 4’2” . Weight - 43 lbs. Max. HP - 3 HP . Pers. Cap. - 5 . Max.
|
Replaces Merc #35-60494-1, Outboards Only, See-Thru Bowl from RACOR-PARKER FILTRAT
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
|
Great White 250qt Cooler from IGLOO
No more spoiled fish! Loaded with features like dual oversized drain plugs, UV inhibitors, lid gasket, fish measuring ruler, stainless steel hardware, and over 2. 5 inches of insulation throughout, this is the ultimate fishing cooler. Holds 2-L Bottle Upright. Threaded Drain Plug. Reinforced Bottom. UV Inhibitors. Accessories Available. Handles - Molded-in handles. Fish measuring ruler molded on lid. Can Capacity: 349. Capacity: 250 Qt.
|
Replacement Element for OMC Outboards Only, No Bowl from RACOR-PARKER FILTRAT
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
|
Full-Flow Flanged Bronze Seacock, 1" Pipe Size from GROCO
Components include 316 stainless steel, full-flow ball, PTFE seals and seats, all bronze castings and a patented reversing handle that facilitates installation and use in cramped locations. Includes bonding wire attachment and drain plug on each side of body. Top fitting is NPT and bottom is NPS.
|
Replacement Element for Mercury Outboards Only, No Bowl from RACOR-PARKER FILTRAT
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
|
Full-Flow Flanged Bronze Seacock, 1-1/4" Pipe Size from GROCO
Components include 316 stainless steel, full-flow ball, PTFE seals and seats, all bronze castings and a patented reversing handle that facilitates installation and use in cramped locations. Includes bonding wire attachment and drain plug on each side of body. Top fitting is NPT and bottom is NPS.
|
Replaces Merc #35-60494-1, Inboards/Outboards, Metal Bowl from RACOR-PARKER FILTRAT
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
|
46qt. Wood Bench Cooler from IGLOO
A versatile complement to your patio or poolside entertaining, this sturdy bench is made of FSC Certified plantation grown eucalyptus wood with a mineral oil finish to seal out the elements, plus there’s an authentic Igloo cooler built in! The cooler features Ultratherm foam insulation in the body and lid to keep food and beverages cold for hours and a chain pull drain plug to make easy work of emptying and cleaning. ft. Exterior Dimensions: 50"L x 24"W x 38 1/2"H.
|
3/4" In-Line Check Valve from RARITAN
White molded thermoplastic. Molded-in arrow shows direction of flow. Stainless spring and Buna-N check ball. Drain plug allows periodic inspection.
|
|
garboard drain plugs
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Garboard Drain Plug/Replacements
Cast brass construction Flange diameter is 2" and is drilled and countersunk for #8 screws Neck depth: 3/8".
Part No: 7553-3
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs
Cast bronze construction. Twist plug has 3/4'' NPT tapered pipe threads. Flange has a 1 1/4'' threaded neck, which fits hulls to 3/4'' thick.
Part No: 0363DP0PLB
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs
Threaded removeable plug. Retention system keeps plug from getting lost. Large 7/8" (27mm) hole for servicing stern drives. Highly polished 316 stainless steel.
Part No: 7557-7
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Garboard Drain Plugs
All styles have a nut-type plug with 1/2" NPT threads for a watertight fit. All are cast bronze for corrosion resistance, with a 2" OD flange predrilled and countersunk for #8 screws. Some styles have a stainless pin for easier plug removal by hand.
Part No: 0737DP1PLB
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Garboard Drain Plugs
All styles have a nut-type plug with 1/2" NPT threads for a watertight fit. All are cast bronze for corrosion resistance, with a 2" OD flange predrilled and countersunk for #8 screws. Some styles have a stainless pin for easier plug removal by hand.
Part No: 0742DP1
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Garboard Drain Plugs
All styles have a nut-type plug with 1/2" NPT threads for a watertight fit. All are cast bronze for corrosion resistance, with a 2" OD flange predrilled and countersunk for #8 screws. Some styles have a stainless pin for easier plug removal by hand.
Part No: 0714DP1PLB
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Garboard Drain Plugs
All styles have a nut-type plug with 1/2" NPT threads for a watertight fit. All are cast bronze for corrosion resistance, with a 2" OD flange predrilled and countersunk for #8 screws. Some styles have a stainless pin for easier plug removal by hand.
Part No: 0742DP2
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Garboard Drain Plug/Replacements
Cast brass construction Flange diameter is 2" and is drilled and countersunk for #8 screws Neck depth: 3/8".
Part No: 44-673-I
|
|
|
Home -> Engine Systems -> Engine Parts
Cast Bronze Flange. Brass Plug. Complete with Zinc Plated Steel Wrench. Pipe Size: 1". Threaded Neck Length: 1".
Part No: 0124000PLB
|
|