Top Sellers
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
Windshield Screw Cover Foam, 5/8"H x 1-1/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
Windshield Screw Cover Foam, 1/4"H x 3/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
Stainless Portlight from LEWMAR
The Stainless Portlight features a highly polished stainless outer frame with a mirror finish quality. The handles and hinge systems are from the Standard Portlight and leave the lens clear of obstructions for a cleaner look. Smoked gray acrylic lens, stainless steel frame. Latches with quick action handles. Friction hinges hold position without stays or straps. Cutout template included. Comes with trim ring, fasteners, template and instructions.
|
|
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Boat Hook Tip from WEST MARINE
Designed to fit the handles of our Admiral- and Captain-Series Deck Brushes. All have positive-locking, pushbutton, quick-connector sockets that prevent accessories from rotating when in use.
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
8-1/2" Hatch Holder, Adjustable, for Hatches to 10lb. from MOONLITE MARINE
Stainless, spring-type holders “pop” into place to hold hatches, doors, table leaves, etc. Easy to install. Adjustable model allows opening between 10° and 80°.
|
Screen for Nibo 1070-10A Hatch from BOMAR
With these spare parts for your Nibo or Gray hatch, you can replace worn or damaged parts for a fraction of the cost of replacing the hatch. Low-Profile Gasket in a 9' length. 9/16" Gasket in a 10' length. Available for the 100 series: Riser Arm Male Hatch Knob Female Hatch Knob. Hatch Tiedown Dog. Left-Locking Quick Dog.
|
12" Deep Access Hatch Liner, Fits 13" x 30" Hatch from TEMPRESS
Ideal for all types of storage Heavy-duty roto-molded hatch liners are great for adding extra storage to your boat. They work well for dry or wet storage.
|
Cabinet Handle, Stainless Steel Bar 13" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
20" x 20" Shade/Screen, Fits Lewmar Hatches, White from SKYSHADE
New screen and shade solution provides the ultimate in heat and light reflection with bug free ventilation for onboard comfort. Combines a retractable hatch shade and flyscreen system in a low-profile styled cassette. Made in extruded polymer and comes with integral hatch liner option, matching hatch corner radii and in three sizes available with round hatch adapter. Installation is simple to fit with four one piece corner mounted screws with integral screw caps . Available in white or beige.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
|
Handle Hatch Accessories
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Low-Profile Hatches
Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. The seal and acrylic are fitted into the aluminum frame to produce a stronger, more leak-proof hatch. All hatches feature a vent position, flange base and sizes 30 and larger have lockable internal and external handles for added security. CE Area II approved. Low-profile hatches have 8mm acrylic in sizes 00 through 54, and 10mm acrylic in size 60.
Part No: 39910030
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Low-Profile Hatches
Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. The seal and acrylic are fitted into the aluminum frame to produce a stronger, more leak-proof hatch. All hatches feature a vent position, flange base and sizes 30 and larger have lockable internal and external handles for added security. CE Area II approved. Low-profile hatches have 8mm acrylic in sizes 00 through 54, and 10mm acrylic in size 60.
Part No: 39944030
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Inspection Hatches
High-impact UV stabilized resin with stainless steel hinge pins make these hatches tough. Their design makes it easy to gain access to below deck areas or create valuable storage space in center consoles of vertical bulk-heads. Large locking T-handle and molded non-slip surfaces. Stark white.
Part No: G81020--W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Medium-Profile Hatches
Until now, replacing scratched or cracked lenses meant sending the lid to the manufacturer or paying a professional to repair it. Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. CE-certified aluminum frame has smooth, rounded edges, inset hinges and rounded corners for snag-resistance. All hatches have flange bases. Medium-profile hatches have a deeper frame section and 12mm acrylic in all sizes.
Part No: 39977020
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Medium-Profile Hatches
Until now, replacing scratched or cracked lenses meant sending the lid to the manufacturer or paying a professional to repair it. Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. CE-certified aluminum frame has smooth, rounded edges, inset hinges and rounded corners for snag-resistance. All hatches have flange bases. Medium-profile hatches have a deeper frame section and 12mm acrylic in all sizes.
Part No: 39960020
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Inspection Hatches
High-impact UV stabilized resin with stainless steel hinge pins make these hatches tough. Their design makes it easy to gain access to below deck areas or create valuable storage space in center consoles of vertical bulk-heads. Large locking T-handle and molded non-slip surfaces. Stark white.
Part No: G81618--W
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Low-Profile Hatches
Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. The seal and acrylic are fitted into the aluminum frame to produce a stronger, more leak-proof hatch. All hatches feature a vent position, flange base and sizes 30 and larger have lockable internal and external handles for added security. CE Area II approved. Low-profile hatches have 8mm acrylic in sizes 00 through 54, and 10mm acrylic in size 60.
Part No: 39950030
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories
Includes O-rings, post and screw Fits Ultra II Powerboat hatches.
Part No: 1727
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Medium-Profile Hatches
Until now, replacing scratched or cracked lenses meant sending the lid to the manufacturer or paying a professional to repair it. Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. CE-certified aluminum frame has smooth, rounded edges, inset hinges and rounded corners for snag-resistance. All hatches have flange bases. Medium-profile hatches have a deeper frame section and 12mm acrylic in all sizes.
Part No: 39950020
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Inspection Hatches
High-impact UV stabilized resin with stainless steel hinge pins make these hatches tough. Their design makes it easy to gain access to below deck areas or create valuable storage space in center consoles of vertical bulk-heads. Large locking T-handle and molded non-slip surfaces. Stark white.
Part No: G81030--W
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Low-Profile Hatches
Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. The seal and acrylic are fitted into the aluminum frame to produce a stronger, more leak-proof hatch. All hatches feature a vent position, flange base and sizes 30 and larger have lockable internal and external handles for added security. CE Area II approved. Low-profile hatches have 8mm acrylic in sizes 00 through 54, and 10mm acrylic in size 60.
Part No: 39900030
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Low-Profile Hatches
Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. The seal and acrylic are fitted into the aluminum frame to produce a stronger, more leak-proof hatch. All hatches feature a vent position, flange base and sizes 30 and larger have lockable internal and external handles for added security. CE Area II approved. Low-profile hatches have 8mm acrylic in sizes 00 through 54, and 10mm acrylic in size 60.
Part No: 39920030
|
|
|
