Top Sellers
Screen for Nibo 1070-10A Hatch from BOMAR
With these spare parts for your Nibo or Gray hatch, you can replace worn or damaged parts for a fraction of the cost of replacing the hatch. Low-Profile Gasket in a 9' length. 9/16" Gasket in a 10' length. Available for the 100 series: Riser Arm Male Hatch Knob Female Hatch Knob. Hatch Tiedown Dog. Left-Locking Quick Dog.
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
Windshield Screw Cover Foam, 5/8"H x 1-1/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
Windshield Screw Cover Foam, 1/4"H x 3/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
|
|
Stainless Portlight from LEWMAR
The Stainless Portlight features a highly polished stainless outer frame with a mirror finish quality. The handles and hinge systems are from the Standard Portlight and leave the lens clear of obstructions for a cleaner look. Smoked gray acrylic lens, stainless steel frame. Latches with quick action handles. Friction hinges hold position without stays or straps. Cutout template included. Comes with trim ring, fasteners, template and instructions.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
8-1/2" Hatch Holder, Adjustable, for Hatches to 10lb. from MOONLITE MARINE
Stainless, spring-type holders “pop” into place to hold hatches, doors, table leaves, etc. Easy to install. Adjustable model allows opening between 10° and 80°.
|
12" Deep Access Hatch Liner, Fits 13" x 30" Hatch from TEMPRESS
Ideal for all types of storage Heavy-duty roto-molded hatch liners are great for adding extra storage to your boat. They work well for dry or wet storage.
|
20" x 20" Shade/Screen, Fits Lewmar Hatches, White from SKYSHADE
New screen and shade solution provides the ultimate in heat and light reflection with bug free ventilation for onboard comfort. Combines a retractable hatch shade and flyscreen system in a low-profile styled cassette. Made in extruded polymer and comes with integral hatch liner option, matching hatch corner radii and in three sizes available with round hatch adapter. Installation is simple to fit with four one piece corner mounted screws with integral screw caps . Available in white or beige.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Boat Hook Tip from WEST MARINE
Designed to fit the handles of our Admiral- and Captain-Series Deck Brushes. All have positive-locking, pushbutton, quick-connector sockets that prevent accessories from rotating when in use.
|
Urethane Universal Joint from RONSTAN
Accessories for Aluminum Battlestick Tiller Extensions.
|
Helmsman Compass Cover from RITCHIE NAVIGATION I
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
|
|
Hatch Accessories BOMAR
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Gasket for Molded Hatches
1/2" x 9 ft Gasket for Gray molded hatches.
Part No: GP904-07-9
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports
Standard equipment on many boats, these low-profile hatches are constructed with molded polycarbonate frames, tough smoked acrylic and passivated stainless hardware. Hatch opens wide or locks in vent position. Supplied completely assembled with screen and trim ring included. Material: Molded polycarbonate frame, smoked-acrylic lens . Latches: Adjustable latches with locked vent position . Hinges: Heavy-duty hinges with stainless-steel supports . Included Accessories: Screen and trim ring .
Part No: G995---1100
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Gasket for Molded Hatches
1/2" x 9 ft Gasket for Gray molded hatches.
Part No: GP904-09
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Black Molded Hatches
Acrylic lens floated inside an insulated pocket improves the longevity, waterproofness, and durability of this low-profile hatch with locking 1/2" vent position. Has a strong UV-Stabilized black resin frame with rugged arms and tie-down dogs Mage in U. S. A.
Part No: G966---1100
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Inspection Hatches
High-impact UV stabilized resin with stainless steel hinge pins make these hatches tough. Their design makes it easy to gain access to below deck areas or create valuable storage space in center consoles of vertical bulk-heads. Large locking T-handle and molded non-slip surfaces. Stark white.
Part No: G81020--W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Nibo Low-Profile Aluminum Frame Hatches
Original equipment on many boats, including Bayliner, Wellcraft, Carver, and Silverton, these super low-profile hatches are constructed of anodized, heavy-duty aluminum and tough smoked-acrylic. Adjustable tie-down dogs. Supplied fully assembled. *Single riser arm Type: Deck hatch . Material: Anodized heavy-duty aluminum frame, smoked-acrylic lens . Latches: Adjustable latches with locked vent position . Included Accessories: None, optional screen and trim ring available by special order .
Part No: N1070-10A
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Inspection Hatches
High-impact UV stabilized resin with stainless steel hinge pins make these hatches tough. Their design makes it easy to gain access to below deck areas or create valuable storage space in center consoles of vertical bulk-heads. Large locking T-handle and molded non-slip surfaces. Stark white.
Part No: G81618--W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Gray Low Profile Molded Hatches
Featured on several boats as standard equipment, these low-profile hatches are constructed of molded polycarbonate frames, and tough smoked acrylic windows. Passivated stainless hardware and nylon. Screen and trim ring included. Smooth corners and edges. Supplied completely assembled. Adjustable tie-down dogs. Opens wide or locks in vent position. . Cutouts: 9 1/2" x 9 1/2". 16 7/8" x 16 7/8". 17 7/8" x 12 7/8".
Part No: G927---1111
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Inspection Hatches
High-impact UV stabilized resin with stainless steel hinge pins make these hatches tough. Their design makes it easy to gain access to below deck areas or create valuable storage space in center consoles of vertical bulk-heads. Large locking T-handle and molded non-slip surfaces. Stark white.
Part No: G81030--W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Access Hatches
Molded of high-impact UV stabilized propylene. Clean textured lid. Low profile for floor mounting. No screws visible from the exterior. 180 degree opening. Strong lid with support bars. Double gasket system for optimum sealing. New patented easy opening, easy closing slam latch.
Part No: G7711---W
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Access Hatches
Low-profile hatches are great for floor mounting. Made of high-impact, UV stabilized polypropylene. Smooth-textured lid has support bars for added strength and screws are hidden from view. Double gasket system for a watertight seal. Easy opening, easy closing slam latch. White. Type: Access hatch. Material: High-impact UV-stabilized polypropylene . Latches: Non-locking slam latch . Hinges: 180° non-locking hinges. Installation Hardware Required: #10 SS Pan Head (sold separately) .
Part No: G7812---W
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->900 Series Low-Profile Molded Polycarbonate Hatches
Standard equipment on many boats, these low-profile hatches are constructed with molded polycarbonate frames, tough smoked acrylic and passivated stainless hardware. Hatch opens wide or locks in vent position. Supplied completely assembled with screen and trim ring included. Material: Molded polycarbonate frame, smoked-acrylic lens . Latches: Adjustable latches with locked vent position . Hinges: Heavy-duty hinges with stainless-steel supports . Included Accessories: Screen and trim ring .
Part No: G966---1111
|
|
|
