Top Sellers
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
|
|
|
Marine Mildew Block from 3M PRODUCTS
Helps keep your boat fresh and looking like newUnique non-toxic formula provides long-lasting protection to help keep your boat fresh and looking like new. Works on virtually all surfaces above the waterline, including sails, seat cushions, carpeting, canvas, deck furniture, rub rails, showers, boat covers and vinyl. 16. 9oz. 16. 9oz.
|
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
|
Canvas Cleaner from MEGUIARS
Quickly clean your canvass, with no need to rinseEffectively removes dirt, stains and mildew to restore canvas to its original look and feel. Simply spray and wipe off. No need for water to rinse away. Perfect for boat covers and bimini tops. 16oz. trigger bottle. 16oz.
|
|
|
Back-to-Back Lounge Chair Seat Cover, 22"H x 50"W x 22"D from TAYLOR
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
|
Adjustable Height Standard Friction Lock Pedestal Seat, Ribbed Series from GARELICK
Seat raises or lowers, locks at desired height . 2-7/8" (7cm) diameter stanchion tube, 9" (23cm) diameter base plate . Anodized protective finish helps prevent saltwater corrosion and weathering. . 2-7/8" (7cm) diameter ribbed stanchion tube, 9.
|
Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.
|
Single Deck Chair Cover, 24"H x 24"W x 22"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.
|
7' Ugly Stik Combo, Saltwater Spinning; 4.6:1 Gear Ratio; Medium Action from SHAKESPEARE
Shakespeare's versatile Ugly Stik combos give the anger plenty of casting power to deliver bait to crafty and boat-wary fish. The two piece rods feature Fuji reel seats and EVA grips to maximize sensitivity and response to light strikes and the Shakespeare spinning reel sports stainless bearings, graphite frame, and aluminum spools for fast, smooth retrieval and reliable casts. Style: Saltwater Spinning . Target Species: Big Water/Light Tackle Targets . Rod Type: Conventional Ugly Stik .
|
|
Helm Seat Seating and Boat Covers
|
|
Home -> Seating & Covers -> Seating -> Helm & Fishing Seats->Type 5 Upholstered Bucket Helm Seats
Attractive, comfortable seat makes a great pilot seat upgrade for runabouts and sport boats. The 5” thick water-resistant, high-density polyurethane foam cushion surrounds a roto molded polyethylene frame for supreme comfort and support. Upholstered in high-quality, marine-grade vinyl to withstand harsh marine environments. Application: Helm, cabin . Frame Material: Polyethylene . T-nuts are molded into the bottom of chair and accept most spiders or slide combinations. Warranty: One Year .
Part No: U89-2029
|
|
|
|
|
Home -> Seating & Covers -> Seating -> Helm & Fishing Seats->Type 5 Upholstered Bucket Helm Seats
Attractive, comfortable seat makes a great pilot seat upgrade for runabouts and sport boats. The 5” thick water-resistant, high-density polyurethane foam cushion surrounds a roto molded polyethylene frame for supreme comfort and support. Upholstered in high-quality, marine-grade vinyl to withstand harsh marine environments. Application: Helm, cabin . Frame Material: Polyethylene . T-nuts are molded into the bottom of chair and accept most spiders or slide combinations. Warranty: One Year .
Part No: U85-1546
|
|
|
|
Home -> Seating & Covers -> Seating
The ultimate helm seat for your runabout, performance sport boat, pontoon or cruiser. This seat offers a high tech, stylish look with loads of comfort features. Frame is constructed with a rigid polyethylene roto-molded core. Upholstered with mildew, UV and stain resistant marine-grade vinyl. Dual track flip-up bolster allows piloting from a sitting, standing or leaning position. Application: Center console, helm . Upholstery Material: Marine grade vinyl . 5"W x 19"D x 18"H .
Part No: 48950-01:02
|
|
|
|
Home -> Seating & Covers -> Seating->Premium Pontoon Captain’s Bucket Seats
Sit comfortably at the helm of your pontoon or deck boat with these plush and stylish bucket seats. Pillow backs and seats are deeply tufted with high-density foam for extra support. Seats are covered with heavy-duty marine-grade vinyl that's UV-stabilized and mildew resistant. All stainless steel fasteners and staples and a double topstitch design ensure top notch durability and looks that will last in the marine environment. Frame Material: Roto molded plastic . Marine Vinyl .
Part No: BM980LS-842
|
|
|
|
|
Home -> Seating & Covers -> Seating->Premium Pontoon Captain’s Bucket Seats
Sit comfortably at the helm of your pontoon or deck boat with these plush and stylish bucket seats. Pillow backs and seats are deeply tufted with high-density foam for extra support. Seats are covered with heavy-duty marine-grade vinyl that's UV-stabilized and mildew resistant. All stainless steel fasteners and staples and a double topstitch design ensure top notch durability and looks that will last in the marine environment. Frame Material: Roto molded plastic . Marine Vinyl .
Part No: BM980LS-840
|
|
|
|
Home -> Seating & Covers -> Seating -> Helm & Fishing Seats
Make the best possible use of space aboard your boat with this rugged, comfortable swingback seat. The hinged lid of the 70-quart container base is ideal for storing anchor tackle, life vests, clothing, etc. Seat and back feature thickly padded ribbed cushions. Swing arms are strong, polished aluminum. Measures 36 1/2''W x 35''H x 17 3/4''D with back attached.
Part No: 179218NI
|
|
|
|
Home -> Seating & Covers -> Seating
Compact seat offers added comfort and a fresh look and is ideal for center console boats. Ergonomic design, including front-of-seat waterfall taper, provides additional support and comfort, with or without cushions. Premium quilted white vinyl cushions feature high-density urethane foam padding, gray vinyl edge piping, and vinyl weave underside to minimize trapped moisture. Cushions snap on/off for easy cleaning.
Part No: 48423-21:02
|
|
|
|
Home -> Seating & Covers -> Seating
Allows helm or boat seats to adjust fore and aft . Slide mounts under seat in between seat and pedestal base . Convenient handle provides solid locking at any position . Compatible with most 360° spiders . Anodized aluminum with stainless steel hardware . Spider swivel casting (99023, 99036) not included . Specifications Full-length size for Roto-molded seats: 7” (18cm) Fore and Aft Travel 8. 5” W x 13” L x 1. For use where additional travel and any seat needing reinforcement underneath.
Part No: 75081:01
|
|
|
|
Home -> Seating & Covers -> Seating
Comfortable and contemporary flip-up bolster seat is ideal for the sophisticated center console boater. The Tracy Helm Chair features heavy-duty tufted upholstery and a unique flip-up mechanism allows the chair to function as a leaning post. High-gloss finish resists the saltwater environment.
Part No: 40-1045
|
|
|
|
Home -> Seating & Covers -> Seating -> Helm & Fishing Seats
This chair's roomy, comfortable shape and molded-in armrests make it ideal for pleasure fishing and boating. Lightweight, rotationally molded, UV-stabilized polyethylene stands up to the marine environment. Molded-in T-nuts accept most pedestals. Two-piece, snap-on white marine-grade vinyl cushion set is easy to clean. Inside dimensions: 17 1/2"W x 16"H x 17"D. Measures 21 3/4"W x 18 1/2"H x 17 3/4"D overall. Made in U. Model 85-1538BA.
Part No: 851538BA
|
|
|
|
Home -> Seating & Covers -> Seating -> Helm & Fishing Seats
The Todd Center Console is rotationally molded of rugged, heavy duty UV resistant polyethylene in one piece and features a built-in forward seat over a molded-in livewell. It has uniquely designed , dash, throttle, and steering panels. The entire interior of the console forms a large dry storage area. Steering wheel mounting requires the use of additional backing material such as exterior plywood, aluminum plate or a polyethylene panel for added panel strength and rigidity.
Part No: 1635PK
|
|
|
|
Home -> Seating & Covers -> Seating -> Helm & Fishing Seats->Neptune Premium Leaning Post
A perfect solution for fishing off your center console boat. Solid polished aluminum construction with 1400 cu. of storage under the white upholstered, padded seat, this leaning post has an easy reach aluminum grab rail to help you keep your footing and a folding footrest with recessed hinges so it's there when you need it and out of the way when you don't. A convenient cooler strap makes it possible to store a cooler underneath. Dimensions without backrest: 33"H x 22"L x 35"W.
Part No: L10-1003-1
|
|
|
