Top Sellers
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
|
BayStar Helm Seal Kits from TELEFLEX
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms . Contains 3 screws, shaft seal and o-ring seal.
|
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
|
SeaStar Filler Kit from TELEFLEX
SeaStar hydraulic steering systems require the use of a special high-quality hydraulic fluid meeting MIL SPEC H-5606 C.
|
Repl. Cylinder - Repl. Hynautic Model K2 from TELEFLEX
Hydraulic Cylinders -- the same quality steering components that comprise the many Hynautic systems may also be ordered independently for both new or retrofit applications.
|
|
|
Speedometer Kit 80mph, 20-80mph, Includes pitot, 20' tubing, Dia, 3.78", Mounting Hole Max/Min, 3.41"/3.44", D 2.7" from TELEFLEX
White dial, black numerals, black pointer with fire-orange tip. Scratch-resistant curved glass lenses with polished stainless steel, near flush bezels. U. S. and metric scales with ISO symbols .
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
|
|
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
|
|
|
Fuel Sending Unit Only - 4-24'' Tank from TELEFLEX
Complete kit includes a reliable dash-mount gauge with a black face and white numerals. The triple patented sending unit has an adjustable float arm and U-channel that fits virtually all tanks from 4"-24" deep. Compatible with 12V DC systems with common or insulated ground.
|
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .
|
4300BC TFX Cable - 20' from TELEFLEX
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
|
|
|
|
Helm TELEFLEX
|
|
Home -> Engine Systems -> Steering Systems->Back Mount Rack Helm & Bezel Kit
Single helm replaces 1984 to date Teleflex “The Rack” steering helm without dash modification. For use in almost all sterndrive, inboard and other power-assisted applications where No Feedback steering is not required. Back mount design allows fast and easy installation in dash. Four turns lock-to-lock, standard 3/4" tapered steering shaft. Requires bezel kit, sold separately. Boat Type: Inboards and power-assisted sterndrives . Steering Type: Rack and pinion . Turns Lock-to-Lock: 4 .
Part No: SH5210P
|
|
|
|
Home -> Engine Systems -> Steering Systems->SeaStar Hydraulic Steering Helms
Replacement front mount hydraulic helms for your steering system. Each helm has a 4-7/16" footprint, 3/4" tapered shaft and nut. To verify which helm you have, simply look at the end of your steering shaft for a 1. 7, 2. 0 or 2. 4 stamping. This is the helm only, but we recommend during installation that you thoroughly inspect hoses and connections for signs of excessive wear.
Part No: HH5770
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->SeaStar Hydraulic Steering Helms
Replacement front mount hydraulic helms for your steering system. Each helm has a 4-7/16" footprint, 3/4" tapered shaft and nut. To verify which helm you have, simply look at the end of your steering shaft for a 1. 7, 2. 0 or 2. 4 stamping. This is the helm only, but we recommend during installation that you thoroughly inspect hoses and connections for signs of excessive wear.
Part No: HH5271
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Back Mount Rack Helm & Bezel Kit
Single helm replaces 1984 to date Teleflex “The Rack” steering helm without dash modification. For use in almost all sterndrive, inboard and other power-assisted applications where No Feedback steering is not required. Back mount design allows fast and easy installation in dash. Four turns lock-to-lock, standard 3/4" tapered steering shaft. Requires bezel kit, sold separately. Boat Type: Inboards and power-assisted sterndrives . Steering Type: Rack and pinion . Turns Lock-to-Lock: 4 .
Part No: SB39526P
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->SeaStar Hydraulic Steering Helms
Replacement front mount hydraulic helms for your steering system. Each helm has a 4-7/16" footprint, 3/4" tapered shaft and nut. To verify which helm you have, simply look at the end of your steering shaft for a 1. 7, 2. 0 or 2. 4 stamping.
Part No: HH5272
|
|
|
|
Home -> Engine Systems -> Steering Systems->Big-T Rotary Helm & Big-T Bezel Kits
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
Part No: SH5000P
|
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Mechanical Steering->Big-T Rotary Helm & Big-T Bezel Kits
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
Part No: SB27265P
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Big-T Rotary Helm & Big-T Bezel Kits
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
Part No: SB27268P
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Hydraulic Steering
This helm is designed to integrate with Hynautic’s smaller cylinders. The helm unit consists of a pump section and a valve section, which includes an internal pilot check for multiple station operation.
Part No: H-50
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Hydraulic Steering
Heal Seal Kit (HS5176. Replacement shaft seal kit for 1990-date SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), Pro & P. S. helms.
Part No: HS5176
|
|
|
|
Home -> Engine Systems -> Steering Systems
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms. HS5176 fits various post-1990 BayStar Plus, SeaStar 1. 4, some 1. 7, 2. 0, 2.
Part No: HS5147
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Steering Kits
For use in almost all stern drive, inboard and other power-assisted applications where No Feedback steering is not required. Single Station. Boat Type: All stern drive, inboard, and power-assisted applications. Steering Type: Rotary Safe-T quick helm. Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H. Steering Wheel: Up to 16". Not included. Steering Wheel Shaft: 3/4" tapered. Cable Type: QC II (SSC62). Mounting Hardware: Included.
Part No: SH5094P
|
|
|
