Top Sellers
Volvo Sterndrive Bellows Kit from SIERRA
Contents: Outdrive gasket set, U-joint bellows, exhaust bellows, shift cable bellows, gimble bearing, and hose clamp.
|
Happyhooker from STEARNS
Makes picking up moorings a snap!Passes and returns a mooring line through a ring or eye automatically. No parts to retrieve when pulling away. Attaches to nearly any diameter pole (not included) with bolt or hose clamp.
|
Cool Mate 5,000 BTU/hr Self-Contained Air Conditioner, 4.3 Amp Draw at 115V AC; 11.1" x 16" x 11.55"; 4" Duct Size from MARINE AIR
Perfect for small express cruisers to midsize cabin cruisers 25'–40', the Cool Mate series air conditioners are self-contained systems that can be owner-installed with common tools in one afternoon. With a stainless-steel drain pan, this straight cool unit comes as a complete kit—pumps, hoses, clamps, fittings, ducts, grilles, etc. —along with a two-switch assembly for controlling airflow. All units draw a relatively low amperage. Compact, easy to install and pre-charged . Reverse Cycle: No .
|
Cool Mate 12,000 BTU/hr Self-Contained Air Conditioner, 10.9 Amp Draw at 115V AC; 13.25" x 19" x 12.2"; 6" Duct Size from MARINE AIR
Perfect for small express cruisers to midsize cabin cruisers 25'–40', the Cool Mate series air conditioners are self-contained systems that can be owner-installed with common tools in one afternoon. With a stainless-steel drain pan, this straight cool unit comes as a complete kit—pumps, hoses, clamps, fittings, ducts, grilles, etc. —along with a two-switch assembly for controlling airflow. All units draw a relatively low amperage. Compact, easy to install and pre-charged . Reverse Cycle: No .
|
Mast Boot Fitting Mast to 23", Collar Size to 37" from SAILING SPECIALTIES, INC.
Easily installed over stepped masts by slitting one side, trimming to fit, and gluing with adhesive supplied. Secure with stainless hose clamps. May not fit rectangular wooden masts. Flexible, UV-resistant plastic.
|
Fuel Tank Installation Kit from MOELLER
Includes stainless steel deck fill, fuel vent, 18" fill hose, 25" vent hose, six hose clamps, vent hose barb, and stainless screws.
|
Cool Mate 16,000 BTU/hr Self-Contained Air Conditioner, 11.7 Amp Draw at 115V AC; 13.25" x 20" x 12.8"; 6" Duct Size from MARINE AIR
Perfect for small express cruisers to midsize cabin cruisers 25'–40', the Cool Mate series air conditioners are self-contained systems that can be owner-installed with common tools in one afternoon. With a stainless-steel drain pan, this straight cool unit comes as a complete kit—pumps, hoses, clamps, fittings, ducts, grilles, etc. —along with a two-switch assembly for controlling airflow. All units draw a relatively low amperage. Compact, easy to install and pre-charged . Reverse Cycle: No .
|
Mast Boot Fitting Mast to 17-1/2", Collar Size to 31" from SAILING SPECIALTIES, INC.
Easily installed over stepped masts by slitting one side, trimming to fit, and gluing with adhesive supplied. Secure with stainless hose clamps. May not fit rectangular wooden masts. Flexible, UV-resistant plastic.
|
Chromed Zinc Cowl Vent from PERKO
3" duct threads into neck. Hose clamps not required. Type: Cowl . Material: Chrome-plated zinc . Dimensions: 2-3/4"H x 4"W x 5-1/4"L . Cutout Size: 3" .
|
Mast Boot Fitting Mast to 30", Collar Size to 44" from SAILING SPECIALTIES, INC.
Easily installed over stepped masts by slitting one side, trimming to fit, and gluing with adhesive supplied. Secure with stainless hose clamps. May not fit rectangular wooden masts. Flexible, UV-resistant plastic.
|
6,500 BTU/Hr. EnviroComfort, 5.4A/7.0A Draw @ 115V AC Cool/Heat, 12.25"H x 13.25"W x 17.75"D, 5" Duct Size from DOMETIC ENVIRONMENTAL
Keep cool in the summer and warm in the winter with one of these reverse-cycle air conditioners designed to operate with R-417A, an environmentally safe gas. Operation is made easy by the EnviroComfort digital control. Reverse Cycle: Yes . or Horiz. Included Equipment: Two-knob control, seawater pump, seawater hose, stainless hose clamps, strainer and speed scoop inlet, overboard discharge, ball valve, ducting, supply and return grilles, PVC plumbing fittings, electrical terminal connectors .
|
9,000 BTU/Hr. EnviroComfort, 6.0A/8.3A Draw @ 115V AC Cool/Heat, 13"H x 14.25"W x 18.25"D, 6" Duct Size from DOMETIC ENVIRONMENTAL
Keep cool in the summer and warm in the winter with one of these reverse-cycle air conditioners designed to operate with R-417A, an environmentally safe gas. Operation is made easy by the EnviroComfort digital control. Reverse Cycle: Yes . or Horiz. Included Equipment: Two-knob control, seawater pump, seawater hose, stainless hose clamps, strainer and speed scoop inlet, overboard discharge, ball valve, ducting, supply and return grilles, PVC plumbing fittings, electrical terminal connectors .
|
15,000 BTU/Hr. EnviroComfort, 9.4A/12.4A Draw @ 115V AC Cool/Heat, 14.25"H x 14.25"W x 19.88"D, 6" Duct Size from DOMETIC ENVIRONMENTAL
Keep cool in the summer and warm in the winter with one of these reverse-cycle air conditioners designed to operate with R-417A, an environmentally safe gas. Operation is made easy by the EnviroComfort digital control. Reverse Cycle: Yes . or Horiz. Included Equipment: Two-knob control, seawater pump, seawater hose, stainless hose clamps, strainer and speed scoop inlet, overboard discharge, ball valve, ducting, supply and return grilles, PVC plumbing fittings, electrical terminal connectors .
|
TYPE 2 Vent/Fill Hose, 1-1/2" ID, 90psi Pressure, 10' Max. Length, .4 ShWt from SHIELDS RUBBER
Premium fire-retardant marine fuel hose with high-nitrile tube handles alcohol-enhanced gasolines. USCG- and NMMA-approved for use with gasoline and diesel. Reinforced with two layers of high-strength synthetic fabric. Sold by the foot. Select TYPE 1 Low Permeation Feed/Vent Hose or TYPE 2 Vent/Fill Hose. Rating: Feed/vent or vent/fill hose . Approvals: SAE J1527 Type A1 & A2 . Construction: Reinforced hose w/ two layers of high strength fabric . Burst Strength: See model description.
|
Poly X Sanitation Hose, 1-1/2"ID, 1-27/32"OD from SHIELDS RUBBER
With a lifetime warranty against odor permeation, this is the best sanitation hose we offer. It combines the flexibility of rubber hose with the permeation resistance of polyurethane. It’s easy to slip on to most fittings and the polyurethane cover is very abrasion resistant. The glossy cover makes clean up easy. Material: Smooth white neoprene inner tube with two textile fabric plies, glossy black polyurethane outer cover. Reinforcement: One steel wire. Temperature Range: –22° to +195°F.
|
|
Hose Clamp Accessories
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704160
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704013
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704021
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704120
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704060
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704240
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704070
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704100
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704210
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704090
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->Giant Hose Clamps
For mast boots or banding broken spars and spinnaker poles.
Part No: 300128HB
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->Giant Hose Clamps
For mast boots or banding broken spars and spinnaker poles.
Part No: 300188HB
|
|