VC-Offshore - Baltoplate Gray, Gallon from INTERLUX
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.

Easy On Bottom Coating from OCEAN ACCESSORIES LL
Why paint when you can wax? If your boating is in low fouling fresh water or cold saltwater, consider new waxing technology instead of anti-fouling bottom paint. An easy-to-use, nontoxic, soft-wax coating for full-season protection. One bottle will cover a 24' boat. Recommended Usage: Fresh or intermittent salt water use; lasts one full season . Clear, nontoxic alternative to bottom paints . Coverage: One pint covers 24' hull . Drying Time: Dries in minutes, overnight curing before launch .

Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.

Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .

Scotch General Painting Masking Tape #2050 - 2" from 3M PRODUCTS
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .

On & Off Hull/Bottom Cleaner - Gallon from MARYKATE
Powerful cleaner removes marine growth from hull Removes waterline, algae, rust and scum. Won't harm fiberglass. Brush-on/rinse-off, biodegradable formula.

On & Off Hull/Bottom Cleaner - Quart from MARYKATE
Powerful cleaner removes marine growth from hull Removes waterline, algae, rust and scum. Won't harm fiberglass. Brush-on/rinse-off, biodegradable formula.

Sea Safe Bottom Cleaner from STARBRITE
Formulated to remove even hardened deposits and tough stains from boat bottoms, this biodegradable cleaner works fast without harming the marine environment. Also works for cleaning baitwells, in-deck storage lockers and removing rust stains. Does not contain harsh acids or phosphates.

Bottom Support Pole Caps, Non-skid from DR. SHRINK
Bottom Support Pole Caps Dr. Shrink carries a full line of premium installation supplies to ensure a professional shrinkwrap job from start to finish.

Preval Complete Sprayer Package from PRECISION VALVE
Here's an easy-to-use spraying systemEliminates the need to match color swatches on hard-to-find spray cans. Allows you to spray your own paint—and virtually any other liquid. Perfect for small jobs that a brush or roller can't handle. Holds 16oz. of paint. 16oz.

Phantom Black Spray Paint from MERCURY MARINE
For all Mercury outboards and MCM/MIE engines and drives.

Engine Spray Paint -Mercury Phantom Black (1960-Pres.) from MOELLER
Durable, heat- and solvent-resistant acrylic lacquers formulated for use on all outboard and inboard engines, stern drive and lower unit applications. They are color-matched to original OEM colors and are a great way to protect your engine and make it look like new. 12oz.

Engine Spray Paint - Johnson/Evinrude, Light Blue Metallic (1978-87) from MOELLER
Durable, heat- and solvent-resistant acrylic lacquers formulated for use on all outboard and inboard engines, stern drive and lower unit applications. They are color-matched to original OEM colors and are a great way to protect your engine and make it look like new. 12oz.

Fuel Filter/Water Separator, 15/35gph Max. Flow, 6"H x 3.2"W x 3.2"D, Metal Bowl from RACOR-PARKER FILTRAT
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .

Engine Spray Paint - Yamaha Metallic Blue Silver (1985-90) from MOELLER
Durable, heat- and solvent-resistant acrylic lacquers formulated for use on all outboard and inboard engines, stern drive and lower unit applications. They are color-matched to original OEM colors and are a great way to protect your engine and make it look like new. 12oz.