GlobalFix™ iPRO Category II GPS-Enabled EPIRB from ACR ELECTRONICS
The screen shows GPS LAT/LON, operating instructions, usage tips, transmission bursts as well as battery power. Self-testing your beacon is simple and easy to understand, with the iPRO digital display visually guiding you through the self test step by step. The GlobalFix™ iPRO is also the first EPIRB that offers Dual GPS Technology. Interface your iPRO to your onboard GPS to ensure that your LAT/LON is stored inside so your precise coordinates are transmitted in the first data burst.

Flo-Torq II Hub Kit, Mercury 225 EFI fourstroke outboards; Yamaha 225hp 4-stroke outboards, Prop Series B from MERCURY MARINE
Change props faster, cheaper, with Quicksilver's modular hubFlo TorQ II modular propellers let you easily switch props, change pitch, change from aluminum to stainless, or replace a bent propeller. They're a direct replacement for the Michigan XHS hub kits. When large underwater obstruction are encountered, the Delrin sleeve of the Flo-Torq II System is designed to "break away" following impact, ensuring that damage to the engine, engine drive and propeller is kept to a minimum.

SW Inverter/Charger Remote Panel with 50ft. Cable from XANTREX
Designed for use with SW and PS inverter/chargers, the SWRC is a full-function remote control with backlit LCD display. The remote control comes with a standard 25’ (7. 5 m) cable or a 50’ optional (15 m) cable.

Midrange Hexaratchet Ratchet Block, Single, 1,800lb. SWL, 14oz. from HARKEN
Stronger versions of the Hexaratchet II+2 with 8:1 holding power. Beefier posts and wraparound straps handle higher working loads. Sheave: Teflon-impregnated Hardkote anodized aluminum. Bearings: Delrin. Sheave Size: 3" (76mm). Line Diameter: 9/16" max. Cheek Material/Finish: Plastic with wrap-around stainless straps. Shackle/Strap Type: Heavy-duty forged swivel with three-way head; locks or rotates. Cleat: 1556 and 1566: 280 Cam-Matic.

Impeller Kit-Alpha One Gen II from MERCURY MARINE
Water pump upper repair kit Alpha One Gen II.

Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .

Power Tilt & Trim Fluid - Quart from WEST MARINE
Formulated to provide viscosity and lubricity necessary for proper pump performance and seal life. Combats high operating pressures and resists rust.

Safe-T QC Helm from TELEFLEX
For use in almost all stern drive, inboard and other power-assisted applications where No Feedback steering is not required. Single Station. Boat Type: All stern drive, inboard, and power-assisted applications. Steering Type: Rotary Safe-T quick helm. Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H. Steering Wheel: Up to 16". Not included. Steering Wheel Shaft: 3/4" tapered. Cable Type: QC II (SSC62). Mounting Hardware: Included.

RailLight™ Clamp-On Solar-Powered Light from SIMPLY BRILLIANT
Solar-Powered Sol Lights™ RailLight™ charges all day and shines all night! Clamp this solar-powered portable light to any railing, coaming, stanchion, step, ladder or dock box for up to eight hours of light with just an eight hour charge of sunlight. Coated stainless steel finish resists corrosion. Comes with two clamps: one for round railings up to 1-1/4", and a transom clamp for up to 2" thickness. Dual 700mA rechargeable and replaceable NiCad batteries.

Power Trim & Steering Fluid, 8oz. from QUICKSILVER
A universal hydraulic fluid designed to mix with all hydraulic fluids, protect seals and hoses, and prevent foaming, oxidation and corrosion.

Aluminum Anode Kit Bravo II & III from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.

P750 Ice Eater, 115V, 25' Cord from POWER HOUSE
The P750 de-ices diameter of approximately 60 feet Prevent damaging ice formation around your boat’s hull with a 3/4 hp energy efficient Ice Eater. Motor is matched with a permanent-split capacitor to ensure quick, high-torque and smooth operation from the single-phase induction motor. Copper, stator motor windings are double-insulated, to guard against water. Internal, hard-faced mechanical seal is itself immersed in dielectric lubricating fluid and protects the motor against water intrusion.

Inflatable Offshore PFD, Auto/Manual, Yellow from WEST MARINE
The versatile inflator can be armed for automatic or manual inflation. Its fleece-lined collar keeps the vest from chafing the back of your neck. A clear window on the outside of the cover allows for fast inspection: green means it’s ready for use, red means it requires rearming. Comes equipped with a quick-release Delrin buckle, 2"W nylon webbing, front zip pocket, SOLAS-grade reflective tape, back-up oral inflation tube and arming cylinder with pill. Buoyancy: 33. 7lb. .

Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .

Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .