Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.

Pick-up Buoy from CAL-JUNE
Durable polypropylene rope through a solid foam float has ample bright at one end for boathook pickup. Galvanized thimble at opposite end accomodates pennant from mooring buoy. Red band makes it more visible Made in U. S. A.

Deluxe Horseshoe Buoy, 40lb. Buoyancy, White, 24" x 24" x 3' from CAL-JUNE
Each Type IV USCG-approved buoy is made of closed-cell foam and covered with a tough, vinyl-coated fabric. The Deluxe Buoy includes a built-in drogue. USCG Type: IV. Configuration: Horseshoe buoy. Material: Closed-cell foam and covered with a tough, vinyl-coated fabric.

Ring Buoy, 24" Diameter, Orange from CAL-JUNE
A life ring that resists weather & temperature extremes—it’s easy to throw, too! Vinyl-coated nylon skin with urethane foam core. Grab line passes through webbing straps around buoy (except Model 10663508, with ropes molded into core). USCG-approved Type IV throwable device Configuration: Ring buoy Buoyancy: 19lb.

Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.

Scupper Valve Assembly from PERKO
Scupper valve assembly is molded white plastic with soft black flapper valve. Without tru-hull and mounting hardware . For surface mount applicaions .

Removable Folding Pontoon Ladder from WINDLINE
Extremely sturdy four-step ladder is constructed of 1" dia. aluminum tubing with wide plastic steps. Integrated swim handles provide hand support. The ladder pops in and out of flush-mounted cups on the deck. Folds to about 4" thick for storage. Mounts on deck in the folded position. So lightweight it floats! Includes mounting cups and hardware. Mounting Style: Hook-Over-Gunwale. Material: Aluminum/Plastic. Number of Steps: 4. Stand-Off Depth: 6".

Stern Rail Outboard Motor Mount for 1" Railing from EDSON CORPORATION
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.

Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.

Motor Mate Lifting Davit from FORESPAR
The unit stores in its own 31" (787. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for scuba tanks, ice, duffel bags, groceries, etc. The Motor Mate uses a Railfast® mounted ring on the rail and a "toe" on the cockpit coaming directly under the rail. Lightweight, portable, compact . Ideal for lifting outboard motors, sea bags, scuba gear . Lifting capacity: 100 lbs.

Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.

Portable Gunwale-Mount Boarding Ladder, 3 Steps, 11" Gunwale Width from WEST MARINE
These portable ladders hook right over your boat’s gunwale with a hull hugging design and ladder standoffs for added safety. Thick non-skid steps feature an Ultra Traction tread that’s kind to your feet. Keep one accessible on board your boat for swimming, skiing and emergencies. 225lb. Mounting Style: Hook over gunwale . Material: Heavy-duty 1" aluminum tubing, vinyl hooks and step treads . Dimensions: 3-step: 36"L x 15"W; 4-step: 48"L x 15"W .

Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .

Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .

Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.