Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
|
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
|
Gas Fill & Tank Vent - Black from PERKO
Perko Gas Fill and Tank Vent This ingenious plastic deck fill has a vent with a flame arrestor built right into the fill flange. A flip-up cap eliminates the need for a deck key and no ground wire is required.
|
Above Deck Tank Hold Down Kit from MOELLER
Includes two flexible 72" straps, two mounting blocks, two eye hooks and four stainless screws.
|
6" Polished Aluminum Flip Up Dock Cleat from DOCK EDGE INC
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .
|
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Topside Fuel Tank, 3 Gallon, 18.13"L x 8.87"W x 9.87"H from MOELLER
Ideal for storage in transom wells and other small areas, these tanks hold their rated capacity and include reserve areas as well. Polyethylene construction with UV inhibitors meet all ABYC and USCG standards.
|
TankWatch® 4 Water/Holding Tank Monitor from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .
|
2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
|
12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
|
Cleat, European Jam from WEST MARINE
Strong nylon jam cleat commonly found on most European boats.
|
Fitting Relocation Kit for Todd Poly Tanks from TODD ENTERPRISES
This kit enables you to seal existing ports in your Todd water tank and install new ones wherever you need them for your installation.
|
|
|
OEM Replacement Fuel Tanks from MOELLER
The OEM’s (Original Equipment Manufacturer’s) choice in lightweight, non-corroding portable fuel tanks! Includes a universal 1/4" NPT fuel pickup adapter and fulfills all your large and small outboard engine needs. Approved for use in Japan, Australia and New Zealand, Canada, ISO and CSA Certified, UL Listed. 21. 25"L x 14"W x 9.
|
