Danik Anchor Hook from SLIDE ANCHOR
Perfect for attachment to a bow eye or sand spike, this combo carabiner/ cam cleat eliminates the periodic hassle of correcting and retying your beach or anchor line. Just pass the line through the cam cleat and pull tight. Made of 304 stainless steel. For boats to 6,000lb. that anchor in protected waters. For use with 3/8"-5/8" line, sold separately. Holds up to 8,000lb.
|
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
|
Medium Folding Grapnel Anchor from SEAFIT
Like mushroom anchors, this four-fluke anchor is a safe choice for inflatables - there are no open flukes to puncture fabric. It's easy to store and won't get tangled in other lines on your boat.
|
100' Anchor Rode from MARINETECH PRODUCTS
These super flexible nylon anchor lines are designed for trailerable watercraft up to 26'.
|
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Chrome Sand Spike Anchor from MARINETECH PRODUCTS
An alternative to more expensive beach and land anchoring devicessimply push this rod into the ground, or use a hammer in firmer soils and attach an anchor line to the attachment loop.
|
Large Anchor & Rode Bag from WEST MARINE
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.
|
Anchor Buddy Mooring Line, Blue from GREENFIELD PRODUCTS
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.
|
Anchor Buddy Mooring Line, Black from GREENFIELD PRODUCTS
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.
|
Bow Roller, Fits Sand (Danforth Style), Anchors up to 20 lb., Special Narrow Width (US Only) from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.
|
Pivoting Self-Launch Bow Roller from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Replacement Delrin Roller, 3" Dia., 3-3/8" Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Replacement Delrin Roller, 2-1/2" Dia., 1-3/4 Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|