AC3000 Auto Trim Tab Control from BENNETT MARINE
Automatic controls for your Bennett Trim Tab system Give your trim tab system real smarts! The Auto Tab Control dials in the perfect running attitude. Just turn it on and it does the rest. Constantly monitors your boat's position and uses your trim tabs to maintain a perfect cruising attitude. Saves fuel and creates the perfect ride .

Tee Type Sanitation Hose Fitting, Slip Fitting Thread from SHIELDS RUBBER
Fiberglass-reinforced nylon fittings designed to fit Shields Series 101, 148 and 144 hoses without heating or special tools. Use in sanitation systems, deck drain systems and water tank fill.

Rejuvenate 2-Cycle Engine Oil, Pint from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.

Rejuvenate 2-Cycle Engine Oil, Gallon from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.

Air Filter for Caterpillar Engine 3116, Detroit Diesel Engines 6V92 1 Turbo, 12V92 2 Turbo, All HP, Tapered, 9" x 12" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).

Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.

Premium Engine Oil - SAE 30, gallon from WEST MARINE
Exceeds OEM requirements— will not void engine warranty. Recommended for engines requiring API CF-2 level performance. Exceeds warranty requirements for all diesel and gasoline engines specifying SAE 30 or SAE 40 grade and API service classifications including Caterpillar, Cummins, Detroit Diesel, Mack, Navistar, Volvo and Mann. Heavy-duty formulation minimizes engine wear to provide long engine life. Exceeds Mack EO-K/2 and Allison C4 specifications and CID A-A-52306A requirements .

DELO 100 Diesel Engine Oil - SAE 30 5 gallons from CHEVRON
Recommended for use in older 2 and 4 stroke marine diesel engines, Chevron DELO 100 motor oils utilize the latest technology to provide excellent performance in older engines using either normal, high, or low sulfur fuels. The SAE 30 and 40 grades are specifically designed for 2-stroke diesel engines requiring highly effective control of wear and deposits. DELO 100 oils comply with Detroit Diesel Corporation 2-stroke engine requirements, including the 0.

OMC Stern Drive, 1964-1986, 4Cyl., V4, V6, All HP from SELOC PUBLICATIONS
SELOC Marine tune-up and repair manuals provide the most comprehensive, authoritative information available for outboard, inboard and stern-drive engines, as well as personal watercraft. SELOC has been the leading source of how-to information for the marine industry since 1974. Step-by-step illustrated keyed procedures guide you through every conceivable job possible, including all adjustments necessary. Accurate specifications and wiring diagrams covers all Gasoline Engines and Drive Systems.

TC-W3 100% Synthetic 2-Cycle Outboard Oil from PENNZOIL
This high-flash, ashless 2-cycle engine oil with biodegradable formulation meets or exceeds 2-cycle outboard manufacturer's warranty requirements. It provides excellent lubricity and wear and rust protection in both pre-mix and injection systems. Exceeds NMMA requirements.

Fuel System Stabilizer from MERCURY MARINE
Used to prevent fresh fuel from undergoing degradation and oxidation during fuel storage. For use with 2- and 4-cycle engines. 1fl. oz. treats 1gal. of fuel.

4" Atlas Hydraulic Jack Plate from T-H MARINE
T-H Marine introduces the next generation in jack plate design, built for the heaviest and most powerful V6 engines on the market today, even the big four strokes. Its innovative high-tech engineered polymer rod and slot lifting design guarantees trouble-free action. This plate also features the newest concept in one-piece hydraulics from the most respected name in hydraulic design, providing the best of all worlds: Speed and self-contained lifting action.

(New) Female Pipe, Straight, 3/8" NPT Fuel Line Size from WALKER ENGINEERING
Racor Turbine Filter Installation Fittings.

30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.

60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.