|
|
1-1/2" Bronze Check Valve from SEAFIT
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
|
Small Bronze Ball Valves with Brass Ball, 3/8" NPT from APOLLO
Free-floating, chrome-plated brass ball. NPT threads. Stainlesssteel handle. Note: These are for inline, non-saltwater applications.
|
Small Bronze Ball Valve with Brass Ball, 1/4" NPT from APOLLO
Free-floating, chrome-plated brass ball. NPT threads. Stainlesssteel handle. Note: These are for inline, non-saltwater applications.
|
CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.
|
3-Way Bronze Ball Valve, 1/2" Size (NPT) from APOLLO
Use in place of a "T" fitting to switch between two tanks.
|
Drain Plug, Bronze 1/2" NPT Threaded from MJS MANUFACTURING
Don’t forget to install your trailerable boat’s drain plug and get that sinking feeling! Get the Plug Boss instead. Put the bright red anodized aluminum plug holder in the most logical place possible, on the trailer winch handle, and never forget to reinstall your drain plug when you launch your boat (or remove it when you haul out). Choose a Plug Boss to fit either the 1" rubber tee handle drain plug or a 1/2" pipe threaded bronze drain plug.
|
3" Stove Pipe Deck Fitting from SEAFIT
This polished bronze fitting features a finned design that insulates the deck from hot stove and heater exhaust. 3" stove pipe screws into tapered bottom of adapter. Includes finishing ring, cover with O-ring seal and key. 2-7/8"H. Flange OD: 7".
|
Oval Deck Pipe from SEAFIT
Accepts line, thimble, shackle and chain to 3/8". Hook under cover holds chain and cover in place. Material: Chromed-plated bronze . Flange: 6. 25" x 4. 5" . I. D. : 4-3/6"L x 2-3/8"W .
|
3/4" NPT ARG Water Strainer with Plastic Strainer Basket from GROCO
The first line of defense to your engine’s cooling system. Well-made traditional bronze strainer head. No leaks under pressure or vacuum. Cast mounting brackets. Mounting system allows removal of the strainer without tools. Buna-N “O-ring” seal at strainer cap.
|
Impeller 09-812B - For pump size F6B from JOHNSON PUMPS
More durable, longer lasting replacement pump has a one-piece bronze body and bronze end-plate with a replaceable cam and wear-plate so it can be rebuilt when needed.
|
5"L T20 Snap Shackle, 31/32" Opening, 31/32" Bail, 10,000lb. MWL from TYLASKA
S. -made shackles offer race-ready high performance, one-handed operation and they can be snapped open under load. Large bail size ideal for additional sheets, spinnakers and other multi-line applications. They have a breaking strength of 5,000 lbs and weigh just 2. 2 ounces in the standard bail configuration. Ideal for J-24s, Mumm 30s and similar boats. Tylaska T8 Snap Shackles are perfect for applications requiring high strength and low weight. 5 ounces in the standard bail configuration.
|
Boat Hook Tip from WEST MARINE
Highly polished bronze with a 1" tapered hole.
|
Large Fixed Bail Snap Shackle from WICHARD
All our snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by increasing its elasticity and maximizing the steel's internal strength. A forged snap shackle will deform long before breaking; it will not burst or break suddenly.
|
Small Fixed Bail Snap Shackle from WICHARD
All our snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by increasing its elasticity and maximizing the steel's internal strength. A forged snap shackle will deform long before breaking; it will not burst or break suddenly.
|
