4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.

Chromed Zamak Cowl Vent from ATTWOOD
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .

Drain Plug, 7/8'' Rubber from ATTWOOD
These expanding rubber plugs are great for live-well tanks, buoyancy tanks on day sailors and small thru-hulls. Made from brass and neoprene. Cam-action lever.

Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .

P-Trap Fuel Surge Protector from ATTWOOD
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.

800gph Tsunami Bilge Pump, 2.5A @ 12V DC Draw, 3/4" Port, 4-3/8"H x 3-1/2"W from ATTWOOD
Versatile Tsunami pumps feature interchangeable, twist-and-lock cartridges that reduce maintenance time. All wires are caulked and tinned to prevent water wicking. Rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents and the compact, low-profile design eases installation in tight spaces.

Tsunami T800 Cartridge Head from ATTWOOD
Interchageable, twist-and-lock cartridges reduce maintenance time and even enable an angler to switch cartridges between an aerator and bilge pump. The rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents.

Micro Carbo-Cam Cleat Kit with 423 Cam, 329 Fairlead from HARKEN
Micro Cam-Matic cleats are legendary for smooth, positive operation when holding and releasing control lines. Mounted aft of the cam, fairleads allow you to engage and release a line up to 45° on either side of the cam. Mounted ahead of the cam, fairleads allow moving lines, such as small catamaran traveler controls, to lead properly. Cam kits include: Cam-Matic® cam cleat: Pawls open/close easily on ball bearings . Large diameter low-friction guides with stainless steel tubes protect lines .

Yellow Medium C-Cleat from RONSTAN
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.

6" Polished Aluminum Flip Up Dock Cleat from DOCK EDGE INC
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .

Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).

Small Fairlead V-Cleat, 1/8"–3/16" Rope Dia., 440lb. SWL from RONSTAN
Inline static cleats are tremendously strong and abrasion-resistant. Teflon®-impregnated carbon fiber composite lasts far longer than traditional plastic cleats. Low-profile, snag-free cleats match existing Clam Cleat hole patterns.

Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.

Portable Gunwale-Mount Boarding Ladder, 3 Steps, 11" Gunwale Width from WEST MARINE
These portable ladders hook right over your boat’s gunwale with a hull hugging design and ladder standoffs for added safety. Thick non-skid steps feature an Ultra Traction tread that’s kind to your feet. Keep one accessible on board your boat for swimming, skiing and emergencies. 225lb. Mounting Style: Hook over gunwale . Material: Heavy-duty 1" aluminum tubing, vinyl hooks and step treads . Dimensions: 3-step: 36"L x 15"W; 4-step: 48"L x 15"W .

Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .