Rule-A-Matic Plus Float Switch from RULE INDUSTRIES
Is the float switch working? It's easy to check! Features a Rule-A-Matic float switch and an impact-resistant cover to protect against debris and jamming. Wiring is "blocked" by a rubber grommet to provide strain relief. Includes a convenient feature for manual tests. Activation Method: Float with mechanical contacts. Dimensions: 2-3/4"H x 2-1/2"W x 4-7/8"L. Capacity: 20A @ 12/24/32V DC.

Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).

Strainer for Round Rule Pump, 2800 - 3700 gph Flow Rate from RULE INDUSTRIES
Original replacement strainer base for your Rule Bilge Pump.

500gph 12V Bilge Pump, 3/4" Port, 1.9A Draw, 2.5A Fuse, 3-1/2"H x 2-3/8"W from RULE INDUSTRIES
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.

3-Way Lighted Rocker Panel Switch from RULE INDUSTRIES
Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic, off, or manual) with the Rule "fail-safe" spring return to "off" from the "manual" position.

Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".

500gph 12V Bilge Pump, 1.9A Draw at 12V DC, 3/4" Port, 4"H x 2-3/8"W from RULE INDUSTRIES
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.

Slimline 500Gph Pump Kit from RULE INDUSTRIES
Portable pump goes where the water is and gets rid of it fastThese hand-deployed, submersible pumps are perfect for pumping out hard-to-reach places where water collects. No slouch when it comes to capacity, they are capable of pumping 500gph and generating a 13-foot head. Powered by your boat's 12V system, they work great for diesel or water transfer, deck showers, washdowns, and baitwell tank aeration. Purchased alone, pumps include a 13-foot power cable with battery clips.

110V AC Automatic Bilge Pump from RULE INDUSTRIES
The 1800gph pumping capacity and extra-long 24' power cord make this pump great for boats with shore power or protecting basements from flooding during wet weather. Motor and durable housing will last for years on the boat or in the home. 5/8" garden hose adapter. gph: 1800. Draw: 1. 1A@110V AC. Built-In Switch: Yes. Material: Plastic. Dimensions: 7-3/4" x 4-3/4". Port Size: 1-1/8".

1/4" Sta-Set X Polyester Double Braid, 2,700lb. Breaking Strength from NEW ENGLAND ROPES
Patented all-polyester braid with parallel core construction and a filament/spun cover for improved handling and greater abrasion resistance. One third less stretch than Sta-Set at only a small price premium. In many applications, Sta-Set X can be used in lieu of expensive racing braids, especially when sized conservatively. Identified by two fine red tracers in the cover forming the characteristic “X”. Best Use: Cruising boat halyards, spinnaker sheets, guys . Stretch: 1.

Nylon Tee, NPT Threaded, 1/2" from SEAFIT
Nylon Tees, NPT Threaded.

G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.

1/8" Endura 12 Dyneema Single Braid, 2,100lb. Breaking Strength from NEW ENGLAND ROPES
Extremely high strength-to-weight ratio! Excellent strength-to-weight ratio, ultra-low elongation, excellent flexibility and wet/dry strength retention, torque-free, and it floats. Constructed from Dyneema SK-75, Endura 12 has a proprietary urethane coating for improved abrasion resistance. Best Use: Halyards, sheets, low-stretch control lines, guys, slings/hoisting ropes . Construction: 12-strand single braid . Core Fiber/Construction: Coated Dyneema SK-75 . 0% at 30% of breaking strength .

Cruising Logbook - Spiral Bound from WEEMS And PLATH
The Cruising Log provides ample space for recording information about your nautical excursions, as well as guest registry. Quick reference pages are provided on such topics as: Rules of the road, radio procedures distress signals, weather reference, and more, as well a space for you to record vital information about your vessel. Embossed cover made of flexible, heavy waterproof material.

RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.