3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .

84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.

Pivoting Self-Launch Bow Roller from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.

Bow Roller, Fits Sand (Danforth Style), Anchors up to 20 lb., Special Narrow Width (US Only) from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.

Swim Platform Bracket, 72-84IN from AFI
A simple way to mount your swim platform. 304 stainless steel brackets, 1. 5"W flat bar stock for the underside of the platform and transom.

Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).

1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.

Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.

Dual Direction 12v Solenoid from LEWMAR
Allows you to set up two operation stations for your windlass. A footswitch at the bow and a hand held remote at the helm or two foot switches, it's all up to you.

Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .

Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.

Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).

T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.

Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .

Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.