VUS007R-Norfolk-Charleston, U.S., Northeast Coast, BlueChart g2 Vision, SD Card from GARMIN
Plug a Vision card into any Garmin 5000/4000, 500/400 Series chartplotter to add premium mapping features and enhanced graphical capabilities. All the new Garmin plotters feature a worldwide basemap that, when optional Vision cards are added, offers the high-detail charting of BlueChart g2, plus high-resolution satellite imagery, above and below the water 3D perspective, auto guidance technology, aerial photographs for real-world reference and coastal roads with points of interest.

DVD-Garmin GPS MAP 3006 from BENNETT MARINE
DVD-GARMIN GPS MAP 3006|DVD-GARMIN GPS MAP 3006.

2" ID, 90° Marine Rubber Exhaust Elbow from SHIELDS RUBBER
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.

5" ID, 45° Marine Rubber Exhaust Elbow from SHIELDS RUBBER
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.

Nova Lift™ from FORESPAR
Forespar's Nova Lift products combine elegant styling with superb strength and function. Other brands swing left and right without control. Nova Lift comes with a stainless-steel lower mounting tube that will accommodate 30" height rails. Vessels with rails higher than 30" will require the use of a deck pad (not included) to raise the installation to the proper height. The Nova Lift with Winch is ideal for trawlers and motor yachts where sailboat winches are not available. 220 lbs.

OSCO CRUSADER ELBOW FOR LOWER SWIVEL from OSCO MOTORS CORP.
Exhaust Elbow Lower Swivel - 3" Outlet Replaces Crusader #97387 .

Vent, Chrome Plated Brass, Thru Hull, 90 degree Elbow from MOELLER
90° Elbow Chrome Plated Brass Thru Hull Vent Accommodates 5/8" I. D.

5/8" Barbed Elbow from SEAFIT
.

Marelon Intake Scoop Strainer, 1-1/4" Max. Thru-Hull Si from FORESPAR
Made of durable composite material and engineered to exceed ABYC and ISO standards.

Drain Fitting, 1-1/4" Straight, 3/4" Hose, Plastic. from FORESPAR
1-1/4" Straight, 3/4" Hose, Plastic.

2" Marelon Mushroom Head, 3"L from FORESPAR
253 Series Hose tailpipe/Mushroom Head.

Motor Mate Lifting Davit from FORESPAR
The unit stores in its own 31" (787. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for scuba tanks, ice, duffel bags, groceries, etc. The Motor Mate uses a Railfast® mounted ring on the rail and a "toe" on the cockpit coaming directly under the rail. Lightweight, portable, compact . Ideal for lifting outboard motors, sea bags, scuba gear . Lifting capacity: 100 lbs.

Vented Loop Cap, Marelon from FORESPAR
Loop Cap Replacement for marelon vented loops.

ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.

Ring Style Car RC-125 from FORESPAR
Separates the up/down and side-to-side motions of the pole to make a bind-free, strong attachment. Shackles are supplied for uphaul/downhaul lines. Stainless steel cheeks, aluminum body and plastic liners. Ring Style Car RC-125 Although a screw-pin stop is supplied, this car is designed to be used with uphaul/downhaul blocks shackled to the bails at each end. Ring ID: 1 5/8". Investment cast stainless steel with plastic liners to reduce friction. Fits UXP and UTR pole end fittings.