Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".

Guzzler 500 Surface Mount Bilge Pump from GUZZLER/BOSWORTH
Guzzler 400 and 500 Bilge Pumps Capable of a 12' suction lift and a 12' delivery head. Surface-mount pumps include a fixed, horizontal handle. Thru-deck models include removable, vertical handle and thru-deck mounting plate with cover.

Hand Bilge Pump, 18" Pump with 24" Hose from WEST MARINE
Easy-to-use manual pumps stow almost anywhereEasy to use hand bilge pumps have no-pinch handles and a removable foot-valve for easy cleaning. Convenient, small size and thin profile make them easy to stow in tight spaces. Unlike many manual pumps, the no-pinch handles allow you to keep pumping without discomfort to your hands. Steel-reinforced pump rod. Removable foot-valve .

Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.

24V Diaphragm Bilge Pump, 10.8gpm, 1" Port from JABSCO
Jabsco Diaphragm Bilge Pumps Self-priming design so you can mount the pump in a convenient location. Each includes a Pumpgard pump strainer (except 10. 8-gpm models). 10.

Strainer for Round Rule Pump, 2800 - 3700 gph Flow Rate from RULE INDUSTRIES
Original replacement strainer base for your Rule Bilge Pump.

500gph 12V Bilge Pump, 3/4" Port, 1.9A Draw, 2.5A Fuse, 3-1/2"H x 2-3/8"W from RULE INDUSTRIES
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.

500gph 12V Bilge Pump, 1.9A Draw at 12V DC, 3/4" Port, 4"H x 2-3/8"W from RULE INDUSTRIES
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.

Service Kit for 30124-0000 Bilge Pump, 8 GPM from JABSCO
Kit includes Connecting rod. Diaphragm. Ppulsation dampener. Valve plate. Valve set (inlet and outlet) .

24 Volt Shower Drain from ITT JABSCO
Shower pump turns itself on and off automaticallyA full-capacity shower drain system with automatic activation. Includes a clear, screw-down cover for easy inspection, removable strainer for easy cleaning, and an internal check valve to prevent back siphoning. 800gph capacity. Consists of a bilge pump, Rule-A-Matic float switch and an enclosing sump.

Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.

Whale Gusher 30, Double Action Twin Diaphragm Pump from WHALE PUMPS
Gusher 30 Pump The Gusher 30 is a double-action pump with twin diaphragms so it will still function if one side becomes clogged. Constructed from epoxy-coated anodized aluminum with a brilliant white finish. Nitrile valves and diaphragms perform well under harsh conditions . Accepts low-resistance 2" hose adapters for maximum performance . 31 GPM @ 70 strokes/min. @ 0 head. . Body: Anodized aluminum .

Slimline 500Gph Pump Kit from RULE INDUSTRIES
Portable pump goes where the water is and gets rid of it fastThese hand-deployed, submersible pumps are perfect for pumping out hard-to-reach places where water collects. No slouch when it comes to capacity, they are capable of pumping 500gph and generating a 13-foot head. Powered by your boat's 12V system, they work great for diesel or water transfer, deck showers, washdowns, and baitwell tank aeration. Purchased alone, pumps include a 13-foot power cable with battery clips.

Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .

Impeller Kit - Neoprene (K) 2-1/4x2 from JABSCO
JABSCO Impellers Tough, long-lasting replacement impellers from the inventors of the flexible impeller pump. Use neoprene for most water-pumping applications.