Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".

Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.

Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.

Fuel Filter Primer Pump Kit from RACOR-PARKER FILTRAT
Prime your fuel line reliably every timeRetrofit this kit to most Racor 1000 or 900 series fuel filters, and you can easily reprime your filter and fuel system. Activate a switch, and fuel is drawn into the pre-screen and pumped through the housing, re-filling the unit. When not in use, the filter pump is bypassed and the fuel/water separator system functions normally. Assembly is only 3. 3" tall .

Rejuvenate 2-Cycle Engine Oil, Pint from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.

Rejuvenate 2-Cycle Engine Oil, Gallon from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.

Star Brite StarTron Gasoline Additive, 8oz. from STARBRITE
Stabilizes gas for short and long term periods of inactivity (up to one year) while preventing the formation of varnish. Eliminates carbon buildup in fuel delivery system and exhaust components. Increases octane and removes water from the fuel, making it the perfect solution to prevent and eliminate ethanol (E-10) fuel problems. Eight ounces treats 128 gallons of gas. Reduce fuel consumption and engine wear while increasing power. For use with any engine; not toxic to the environment.

P-Trap Fuel Surge Protector from ATTWOOD
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.

(New) Female Pipe, Straight, 3/8" NPT Fuel Line Size from WALKER ENGINEERING
Racor Turbine Filter Installation Fittings.

Princess Propane Range - 3-Burner from SEAWARD PRODUCTS
These Seaward ranges were rated #1 by Practical Sailor and Powerboat Reports. They feature stainless-steel construction and fuel lines, AGA approved thermocouple valves that shut off in case burners are extinguished, and piezo electric ignition that needs no electrical hookup. Safety clips secure range tops to eliminate rattling. Thermostatically-controlled 8000 Btu ceramic oven maintains steady temperature, distributes heat evenly, makes cleaning easy and conserves fuel. Built to ANSI Z. 21.

Fuel System Treatment & Stabilizer from MERCURY MARINE
Fuel System Treatment & Stabilizer Prevents fresh fuel from degradation and oxidation. 1oz. treats six gallons of fuel. For two-and four-cycle engines. 16oz. plastic bottle.

Fuel Filter Only from MERCURY MARINE
1662576 is a kit for gasoline outboard and MerCruiser models, except 1992 MCM 4. 3L Gen II engines equipped with an in-line fuel filter. 1662550 is an individual replacement element. Model 4531430 is located under the cowl on all Mercury/Mariner V6 outboards, up to 1995, and includes black screw-in sensor. Similar 5037320 is under-cowl filter for Mercury/Mariner V6, 1996 and up, with blue screw-in sensor. OMC model replaces OMC# 502905. Fuel Type: Gasoline. Filtering Efficiency: 25 micron .

In-Line Fuel Filter - 5/16 from MERCURY MARINE
An Assortment of Fuel and Carburetor filters for Mercury Engines.

Air Filter for Detroit Diesel Engines 671 Natural/Turbo, 8V71 Natural, 12V71 2 Turbo, 6V92 2 Turbo, 8V92 1 Turbo/2 Turbo, 12V92 Natural, All HP, Tapered, 9" x 9" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).

Air Filter for Caterpillar Engine 3116, Detroit Diesel Engines 6V92 1 Turbo, 12V92 2 Turbo, All HP, Tapered, 9" x 12" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).