Waterguard Cartridge Filter from SHURFLO
No more "boat water" taste! Enjoy great tasting, healthy, clean water on your boat or RV. Filters chlorine, sediment, lead and cysts. Features easy installation and a no-mess, disposable, quick-twist carbon block filter that you can change in seconds. Kit includes head, cartridge, winterizing diverter, fittings and mounting hardware. Filter is 12"H x 2. 5"W. One year warranty. Ensures drinking water tastes good and is safe to drink.

Single-Tap Faucet w/Switch and Pump from SHURFLO
null.

Flush-Mount Water Regulator/Inlet from SHURFLO
This combination water regulator, entry screen and check valve with Shurflo’s exclusive diaphragm design provides continuous protection from pressure surges. Pressure will not exceed 50psi. For installation on bulkheads of any thickness. Made of chromed plastic. 4-3/4" x 4-3/4" x 3-3/4".

Float Switch from SHURFLO
Offered with or without a protective cage, this non-mercury float switch utilizes mechanical contacts for reliable bilge pump activation. Includes 3', tinned wire leads. May be mounted apart from pump or snapped into base plate of Shurflo 380, 500, 700 and 1000gph pumps. 4. 4"L x 3. 6"W x 1. 3"H. For use with 12V and 24V DC pumps. ABS plastic. Two year limited warranty. Activation Method: Float with mechanical contacts .

Fuel Filter Cartridge from SIERRA
FILTER Replaces: Mercruiser 35-866171A01 Fits: 350 Mag MPI Alpha/Bravo, 350 Mag MPI Horizon Alpha/Bravo, 350 Mag MPI Horizon MIE, 350 Mag MPI MIE, 496 MAG, 496 MAG H. O. , 5. 0 MPI Alpha/Bravo, 8. 1L Inboard, 8. 1L Inboard H. O. , MX 6.

In-Line Fuel Filter - 5/16 from MERCURY MARINE
An Assortment of Fuel and Carburetor filters for Mercury Engines.

Series 110 Gasoline Filter Replacement Element from RACOR-PARKER FILTRAT
Gasoline Filter Spin-On Replacement Elements.

Fuel Filter Only from MERCURY MARINE
1662576 is a kit for gasoline outboard and MerCruiser models, except 1992 MCM 4. 3L Gen II engines equipped with an in-line fuel filter. 1662550 is an individual replacement element. Model 4531430 is located under the cowl on all Mercury/Mariner V6 outboards, up to 1995, and includes black screw-in sensor. Similar 5037320 is under-cowl filter for Mercury/Mariner V6, 1996 and up, with blue screw-in sensor. OMC model replaces OMC# 502905. Fuel Type: Gasoline. Filtering Efficiency: 25 micron .

Air Filter for Detroit Diesel Engines 671 Natural/Turbo, 8V71 Natural, 12V71 2 Turbo, 6V92 2 Turbo, 8V92 1 Turbo/2 Turbo, 12V92 Natural, All HP, Tapered, 9" x 9" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).

10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.

BK-1 Replacement BilgeKleen Filter from CENTEK INDUSTRIES
We recommend that filters be checked or changed every 3 months.

10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .

Air Filter for Caterpillar Engine 3116, Detroit Diesel Engines 6V92 1 Turbo, 12V92 2 Turbo, All HP, Tapered, 9" x 12" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).

Fuel Filter/Water Separator, 15/35gph Max. Flow, 6"H x 3.2"W x 3.2"D, Metal Bowl from RACOR-PARKER FILTRAT
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .

Bilge Pro Replacement Motor Cartridge for 500gph Pumps from JOHNSON PUMP
In the event of a problem, replacing your cartridge bilge pump motor is easy— provided you keep one of these on hand. Just pop out the old cartridge and pop in the new. Fit Johnson, West Marine Bilge Pro and Mayfair cartridge-style bilge and livewell pumps.