Welcome! Please Sign-In
Top Sellers
Above Deck Fuel Tank with Mechanical Vent Gauge (15-Gallon) from MOELLER
Above Deck Fuel Tank with Mechanical Vent Gauge (15-Gallon) from MOELLER
Specifcally designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs, this tank provides a positive seal with Moeller-exclusive injection molded 2-1/4" fill neck. The mechanically vented fuel cap is easy to grip and the 90 degree, 1/4 NPT fuel withdrawal elbow rotates 360 degrees, which eliminates fuel hose kinking. Includes an easy-to-read mechanical direct-sight gauge.
Fuel Filter Primer Pump Kit from RACOR-PARKER FILTRAT
Fuel Filter Primer Pump Kit from RACOR-PARKER FILTRAT
Prime your fuel line reliably every timeRetrofit this kit to most Racor 1000 or 900 series fuel filters, and you can easily reprime your filter and fuel system. Activate a switch, and fuel is drawn into the pre-screen and pumped through the housing, re-filling the unit. When not in use, the filter pump is bypassed and the fuel/water separator system functions normally. Assembly is only 3. 3" tall .
30GPH Cartridge, Replaces Racor S3240 from SIERRA
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
Replacement Cap with Gauge from MOELLER
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.
Aluminum Permanent Fuel Tank Hold Down Kit from MOELLER
Aluminum Permanent Fuel Tank Hold Down Kit from MOELLER
Aluminum Permanent Fuel Tank Hold Down KitMoeller part # 035710.
1-1/2" Bronze Check Valve from SEAFIT
1-1/2" Bronze Check Valve from SEAFIT
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Antifreeze & Coolant, 55 Gallons from SEAFIT CHEMICALS
Antifreeze & Coolant, 55 Gallons from SEAFIT CHEMICALS
Ideal for all engine usesA nontoxic, virgin propylene glycol formula for superior engine protection during storage or operation. Inhibitors protect against corrosion, and additives help prevent breakdown at high temperatures. We do not recommend usage at full strength in engine systems. Not for use in potable water systems. Use as a coolant in the summer and as antifreeze in the winter. Special additives guard against slime and scale. Not recommended for use full strength in engine systems.
OEM Replacement Fuel Tanks from MOELLER
OEM Replacement Fuel Tanks from MOELLER
The OEM’s (Original Equipment Manufacturer’s) choice in lightweight, non-corroding portable fuel tanks! Includes a universal 1/4" NPT fuel pickup adapter and fulfills all your large and small outboard engine needs. Approved for use in Japan, Australia and New Zealand, Canada, ISO and CSA Certified, UL Listed. 21. 25"L x 14"W x 9.
OMC Outboard Fuel System Package from MOELLER
OMC Outboard Fuel System Package from MOELLER
5-gallon tank, primer bulb, fuel line and a quick connector just fill the tank with gas, attach the quick connector to your outboard and go. All fittings and connectors are built to strict specifications as OEM replacement parts. 8' hose constructed of tough nylon braided inner hose and pliable UV resistant outer hose. Uniflow primer bulb allows maximum fuel passage and internal check valve prevents backflow. 5"L x 13. 75"W x 10"H) . Holds full rated capacity with reserve area.
Topside Fuel Tank, 3 Gallon, 18.13"L x 8.87"W x 9.87"H from MOELLER
Topside Fuel Tank, 3 Gallon, 18.13"L x 8.87"W x 9.87"H from MOELLER
Ideal for storage in transom wells and other small areas, these tanks hold their rated capacity and include reserve areas as well. Polyethylene construction with UV inhibitors meet all ABYC and USCG standards.
12 Gallon Topside Fuel Tank from MOELLER
12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
Fuel Tank Connector, Yamaha 1/4 NPT Male Brass from MOELLER
Fuel Tank Connector, Yamaha 1/4 NPT Male Brass from MOELLER
Yamaha 1/4 NPT Brass Male Tank Connector.
No Spill Fuel Saver from DAVIS INSTRUMENTS
No Spill Fuel Saver from DAVIS INSTRUMENTS
Attach the No Spill container to the hull with the powerful suction cups over the fuel tank vent when refueling. The fuel-resistant bottle will capture the runover fuel from the vent when the tank is full. Prevent stains on the hull and pollution to the environment.
Fuel Sending Unit Only - 4-24'' Tank from TELEFLEX
Fuel Sending Unit Only - 4-24'' Tank from TELEFLEX
Complete kit includes a reliable dash-mount gauge with a black face and white numerals. The triple patented sending unit has an adjustable float arm and U-channel that fits virtually all tanks from 4"-24" deep. Compatible with 12V DC systems with common or insulated ground.
Fuel Line - 5/16" - Universal from MOELLER
Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".

Permanent Below Deck Fuel Tanks, Permanent Fuel Tanks Engine Systems

Lantern Flashlights
Large Battery Boxes
Lid MAGMA PRODUCTS
Meter XANTREX
Minn Kota I Pilot Accessory - Wireless Gps-Based Trolling Motor Control System
Moeller 90° Fill Series Permanent Below Deck Fuel Tanks
Moeller Belly Series Below Deck Fuel Tanks
MOELLER Tank
MOELLER Vent
Monitor PROFESSIONAL MARINER
MORSE BEARINGS Bearing
Motor Mounts Engine Systems
MRD-70 AM/FM/CD/MP3 Multi-Zone Component Stereo System, Poly-Planar Mrd-70 am/Fm/Cd/Mp3 Multi-Zone Component Stereo System
Multifunction Instruments RAYMARINE INC.
MUSTANG Safety
Navigation Accessory
Navigation Plotter
OSCO MOTORS CORP. Manifold
OSCO MOTORS CORP. Osco Mount
Osco Mount Engine Systems
Paint DETCO, DETCO Maintenance
PENN FISHING TACKLE Fishing
Penn Fishing Tackle Penn Senator Conventional Reel
Penn Senator Conventional Reel
PERKO Cable
Permanent Below Deck Fuel Tanks
Permanent Fuel Tanks Engine Systems
Pfd SPINLOCK
Plug PROFESSIONAL MARINER
Pole Radar Accessories
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12