Top Sellers
Swing Mount TO 60LB from RAM MOUNTS
Mount electronics to swing out when you need them, fold away when you don't A versatile way to attach radar, sonar, computers and other devices. They can attach on horizontal or vertical surfaces including rails and masts from 1" to 2. 1/2"dia. Attachments are stainless steel and joints have nylon bearing surfaces for easy use. Arms are 6"L and rated to support 65lb. Choose from either a 2" X 6 1/4" end plate that pivots, or a ball and socket for more adjustability.
|
Swing Mount Arm Extension from RAM MOUNTS
Mount electronics to swing out when you need them, fold away when you don't A versatile way to attach radar, sonar, computers and other devices. They can attach on horizontal or vertical surfaces including rails and masts from 1" to 2. 1/2"dia. Attachments are stainless steel and joints have nylon bearing surfaces for easy use. Arms are 6"L and rated to support 65lb. Choose from either a 2" X 6 1/4" end plate that pivots, or a ball and socket for more adjustability.
|
ST70 Speed Transducer Pod from RAYMARINE INC.
ST70 transducer pods connect to your network and host any standard Raymarine instrument depth, speed or wind transducer (each sold separately).
|
Compass Sport Dash Mount Black from RITCHIESPORT
These compact compasses have a new streamlined bezel that fits even more flush to your dash. Fit standard 2 1/16" instrument holes, and adjust 30° to match dash angles. They feature 2" direct reading cards, exclusive NiteVu night lighting and sapphire jewel and steel pivot movements. No built-in compensator magnets. Apparent Card Dia. : 2" . Card Type: Direct . Mounting Style: Dash . Case Material: Reinforced polymer . Case Dimensions: 2 3/16"dia. x 3"D .
|
ST40 Depth System w/ Transom Mount Transducer from RAYMARINE INC.
Few measurements are more important to safe boat navigation than knowing the water depth. especially when the bottom is hard and the water is thin. The ST40 Depth instrument will provide a clear indication of depths to 400', and can also be set to alarm you for shallow and deep water. The flush-mount transducer will barely cause a ripple due to its nearly flush shape (for hulls up to 1. 87" thick. ) Also indicates minimum depth since power-up. Digit Size: 1. Maximum Depth:0 to 400ft.
|
Self Leveling Pole Mount from SEAVIEW
New for 2009, this Self-Leveling mast and backstay mounting system guarantees your radar will stay level with the horizon as the boat heels or rolls. The carbon fiber or stainless steel radar cradle minimizes weight while the 316 stainless steel head unit ensures durability. The patented oil dampened leveling system provides precise function even in the most adverse weather conditions.
|
Tachometer (4"), 0–6,000 rpm, 4-, 6-, 8-cyl. IB & I/O gas engines from FARIA INSTRUMENTS
For more than 50 years, Faria has lived up to its reputation as a producer of high-quality, long-lasting instruments. The immensely readable and durable instruments in the Euro series feature bold, bright white numerals against a non-glare black background. Sculpted white pointers and low-profile black aluminum bezels make for even greater readability. Features a perimeter-lit black dial and flat glass lens.
|
Tachometer (4"), 0–7,000 rpm, Universal for all outboards from FARIA INSTRUMENTS
For more than 50 years, Faria has lived up to its reputation as a producer of high-quality, long-lasting instruments. The immensely readable and durable instruments in the Euro series feature bold, bright white numerals against a non-glare black background. Sculpted white pointers and low-profile black aluminum bezels make for even greater readability. Features a perimeter-lit black dial and flat glass lens.
|
Oil Pressure (2"), 0–80 psi. Sender required, not included from FARIA INSTRUMENTS
Over 50 years of experience are behind every one of these Faria instrument gauges. They’re designed with an eye for sophistication and a mind for value. Perimeter lighted white dial with stylish blue and black graphics. Polished stainless steel bezel. Contoured black pointer and domed glass lens. All gauges are 12V DC with negative ground and are all internally illuminated unless otherwise noted. Include backclamp, hardware, and installation instructions. Mfr. ’s lifetime limited warranty.
|
Windex Universal Masthead Mount from DAVIS INSTRUMENTS
Includes aluminum shaft, brackets, and stainless fasteners for top or side mounts .
|
Tachometer/System Check (4"), Johnson/Evinrude outboard, 7000RPM from FARIA INSTRUMENTS
Over 50 years of experience are behind every one of these Faria instrument gauges. They’re designed with an eye for sophistication and a mind for value. Perimeter lighted white dial with stylish blue and black graphics. Polished stainless steel bezel. Contoured black pointer and domed glass lens. All gauges are 12V DC with negative ground and are all internally illuminated unless otherwise noted. Include backclamp, hardware, and installation instructions. Mfr. ’s lifetime limited warranty.
|
Depth Sounder (2"), in-hull transducer, 3–199ft., adj. keel offset, deep/shallow water alarms from FARIA INSTRUMENTS
Over 50 years of experience are behind every one of these Faria instrument gauges. They’re designed with an eye for sophistication and a mind for value. Perimeter lighted white dial with stylish blue and black graphics. Polished stainless steel bezel. Contoured black pointer and domed glass lens. All gauges are 12V DC with negative ground and are all internally illuminated unless otherwise noted. Include backclamp, hardware, and installation instructions. Mfr. ’s lifetime limited warranty.
|
Fuel Gauge (2"), E–1/2–F from FARIA INSTRUMENTS
Over 50 years of experience are behind every one of these Faria instrument gauges. They’re designed with an eye for sophistication and a mind for value. Perimeter lighted white dial with stylish blue and black graphics. Polished stainless steel bezel. Contoured black pointer and domed glass lens. All gauges are 12V DC with negative ground and are all internally illuminated unless otherwise noted. Include backclamp, hardware, and installation instructions. Mfr. ’s lifetime limited warranty.
|
Speedometer (4"), 0–55 mph from FARIA INSTRUMENTS
Over 50 years of experience are behind every one of these Faria instrument gauges. They’re designed with an eye for sophistication and a mind for value. Perimeter lighted white dial with stylish blue and black graphics. Polished stainless steel bezel. Contoured black pointer and domed glass lens. All gauges are 12V DC with negative ground and are all internally illuminated unless otherwise noted. Include backclamp, hardware, and installation instructions. Mfr. ’s lifetime limited warranty.
|
Tachometer/Hourmeter (4"), 0–6,000 rpm. For 4-, 6-, 8-cyl. IB & I/O gas engines from FARIA INSTRUMENTS
Over 50 years of experience are behind every one of these Faria instrument gauges. They’re designed with an eye for sophistication and a mind for value. Perimeter lighted white dial with stylish blue and black graphics. Polished stainless steel bezel. Contoured black pointer and domed glass lens. All gauges are 12V DC with negative ground and are all internally illuminated unless otherwise noted. Include backclamp, hardware, and installation instructions. Mfr. ’s lifetime limited warranty.
|
|
Instrument Mounts Pod
|
|
Home -> Electronics -> Boat Instruments -> Instrument Mounts->Instrument CompanionwayPod
Mount up to three 110mm sailing instruments over your companionwayMount up to three 110mm sailing instruments over your companionway. Uncut face: 15"W x 5"H. Installation requires the Companionway Pod Mount Kit. The kit is 39"W to fit over most companionways. It's constructed of 1. 25"dia. stainless steel tube, polished and pre-drilled to fit the Companionway Pod.
Part No: CWP320
|
|
|
Home -> Electronics -> Boat Instruments -> Instrument Mounts->Instrument CompanionwayPod
Mount up to three 110mm sailing instruments over your companionwayMount up to three 110mm sailing instruments over your companionway. Uncut face: 15"W x 5"H. Installation requires the Companionway Pod Mount Kit. The kit is 39"W to fit over most companionways. It's constructed of 1. 25"dia. stainless steel tube, polished and pre-drilled to fit the Companionway Pod.
Part No: SK300
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Classic Instrument Pods
Classic Pod Fits directly to the Enguard and Classic style pedestals, via a special top plate. Offers increased mounting space for instruments, on the pedestal.
Part No: 89400100
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Classic Instrument Pods
Classic Pod Fits directly to the Enguard and Classic style pedestals, via a special top plate. Offers increased mounting space for instruments, on the pedestal.
Part No: 89400059
|
|
|
Home -> Electronics -> Boat Instruments
An intuitive graphical user interface and high-resolution color screen provide the ultimate view and control of all your instrumentation and navigation data. Designed for simple setup and extensive user customization, its list of capabilities include depth, speed, wind, navigation data, autopilot status, engine monitoring and more. The 3. New SeaTalk Next Generation data bus architecture enables simple interconnection of multiple ST70 instruments, transducers and NMEA 2000 compatible devices.
Part No: E22105
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac
Tandem Vertical Pod Manufactured from thermoformed uPVC Allows for 2–3 single instruments Instrument pod will swivel through 180° Pod arm will fit 1-1/8" and 1-1/4" diameter guardrail tubes All wiring of products mounted to the pod arm/instrument housing is hidden internally.
Part No: 89400355
|
|
|
Home -> Electronics -> Boat Instruments->Instrument Pods - Precut and Uncut
Instrument pods Fully adjustable mounting base for better viewing. Can be mounted vertical or up-side-down. UV resistant ABS plastic housing. Water tight gasket. Gortex vent. Marine grade anodized aluminum base.
Part No: POD-2-RC80
|
|
|
Home -> Electronics -> Boat Instruments->Instrument Pods - Precut and Uncut
Instrument pods Fully adjustable mounting base for better viewing. Can be mounted vertical or up-side-down. UV resistant ABS plastic housing. Water tight gasket. Gortex vent. Marine grade anodized aluminum base.
Part No: POD-1-LHDS5
|
|
|
Home -> Electronics -> Boat Instruments->Instrument Pods - Precut and Uncut
Instrument pods Fully adjustable mounting base for better viewing. Can be mounted vertical or up-side-down. UV resistant ABS plastic housing. Water tight gasket. Gortex vent. Marine grade anodized aluminum base.
Part No: POD-3-LHDS10
|
|
|
Home -> Electronics -> Boat Instruments->Instrument Pods - Precut and Uncut
Instrument pods Fully adjustable mounting base for better viewing. Can be mounted vertical or up-side-down. UV resistant ABS plastic housing. Water tight gasket. Gortex vent. Marine grade anodized aluminum base.
Part No: POD-2-LHDS8
|
|
|
Home -> Electronics -> Boat Instruments->Instrument Pods - Precut and Uncut
Instrument pods Fully adjustable mounting base for better viewing. Can be mounted vertical or up-side-down. UV resistant ABS plastic housing. Water tight gasket. Gortex vent. Marine grade anodized aluminum base.
Part No: POD-1-LHDS7
|
|
|
Home -> Electronics -> Boat Instruments->Instrument Pods - Precut and Uncut
Instrument pods Fully adjustable mounting base for better viewing. Can be mounted vertical or up-side-down. UV resistant ABS plastic housing. Water tight gasket. Gortex vent. Marine grade anodized aluminum base.
Part No: PODW-1-SAP28
|
|