50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .

Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.

SW Inverter/Charger Remote Panel with 50ft. Cable from XANTREX
Designed for use with SW and PS inverter/chargers, the SWRC is a full-function remote control with backlit LCD display. The remote control comes with a standard 25’ (7. 5 m) cable or a 50’ optional (15 m) cable.

Tachometer/System Check (4"), Johnson/Evinrude outboard, 7000RPM from FARIA INSTRUMENTS
For more than 50 years, Faria has lived up to its reputation as a producer of high-quality, long-lasting instruments. The immensely readable and durable instruments in the Euro series feature bold, bright white numerals against a non-glare black background. Sculpted white pointers and low-profile black aluminum bezels make for even greater readability. Features a perimeter-lit black dial and flat glass lens.

Raw Water Strainer, 1" Port Sizes from SHURFLO
Assembly features durable nylon upper housing, clear polymide twist-off bowl and pop-out, 50-mesh stainless steel screen.

3.8mm Spyderline, 50' Spool, 1900lb. Breaking Strength, Lime from NEW ENGLAND ROPES
Very low stretch with a variety of uses This spiderweb sized, high-performance line has a Dyneema SK-75 core inside a polyester double braid cover that provides superior strength for its tiny diameter. It is flexible, yet firm enough to be led through small leads, micro blocks and purchase systems and is also a great choice as sail ties for the performance Opti sailor. Best Use: Performance dinghy cascade systems and control lines . Core Fiber/Construction: Dyneema SK-75 braid .

Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .

Impeller Kit 09959K from WICOR/SHERWOOD
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.

Bootstripe Tape, 2'' Black from SEAFIT
Great for use along the waterline or as an accent along the gunnelsThese self-adhesive vinyl accent stripes liven up the look of any boat. Vibrant, long lasting colors add just the right touch of pizzazz to your boat's exterior, changing it from drab and ordinary to bright, clean and beautiful. Sold in 50' rolls.

10077K REPL IMPELLER KIT from WICOR/SHERWOOD
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.

Bootstripe Tape, 1'' Blue from SEAFIT
Great for use along the waterline or as an accent along the gunnelsThese self-adhesive vinyl accent stripes liven up the look of any boat. Vibrant, long lasting colors add just the right touch of pizzazz to your boat's exterior, changing it from drab and ordinary to bright, clean and beautiful. Sold in 50' rolls.

Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .

Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).

Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".

Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.