Swing Mount TO 60LB from RAM MOUNTS
Mount electronics to swing out when you need them, fold away when you don't A versatile way to attach radar, sonar, computers and other devices. They can attach on horizontal or vertical surfaces including rails and masts from 1" to 2. 1/2"dia. Attachments are stainless steel and joints have nylon bearing surfaces for easy use. Arms are 6"L and rated to support 65lb. Choose from either a 2" X 6 1/4" end plate that pivots, or a ball and socket for more adjustability.

Swing Mount Arm Extension from RAM MOUNTS
Mount electronics to swing out when you need them, fold away when you don't A versatile way to attach radar, sonar, computers and other devices. They can attach on horizontal or vertical surfaces including rails and masts from 1" to 2. 1/2"dia. Attachments are stainless steel and joints have nylon bearing surfaces for easy use. Arms are 6"L and rated to support 65lb. Choose from either a 2" X 6 1/4" end plate that pivots, or a ball and socket for more adjustability.

F35B-8007 Gen Set or Diesel 12mm Shaft Engine Cooling Pump, Onan, Westerbeke, Faryman OEM from JOHNSON PUMPS
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.

F7B-9 Gear-Driven Ford Engine Cooling Pump, Ford OEM from JOHNSON PUMPS
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.

Spreader Halyard Kit from JOHNSON, C.S.
Spreader Halyard Kit This kit provides everything you need to add a flag halyard to your boat. Includes: 40' of 3/16"diameter polyester line . Block with bail.

Small Boat Clevis Pin Kit from JOHNSON, C.S.
Assorted sizes of stainless-steel clevis and cotter pins. Small Boat kit contains 46 pieces ranging from 3/16"–5/16".

Hand Crimp Tool from JOHNSON, C.S.
Precisely machined and hardened dies maximize the strength of hand crimp wire terminals.

Anchor Chain Tensioner from JOHNSON, C.S.
Holds chain up to 5/16" firmly to keep your anchor quiet on its roller. A quick-release pin holds the welded handle securely in a tensioned position. 316 stainless steel.

Grab-N-Go Mooring Hook from JOHNSON, C.S.
When ready to cast off, just pull the release loop with your boat hook and you are away! 316 stainless steel.

Hand Crimp Pelican Hook, 3/16" Wire Size, 1-1/4 Adj. Range, 5/16-24LH Thread from JOHNSON, C.S.
True “over center” design opens easily under tension so you don’t have to create slack in the line.

Pulpit Anchor from JOHNSON, C.S.
Anchor any lifeline fitting. Fits 1"dia.

Small, 7 Holes, 1-7/8" Adj. Range, 1/4" Chainplate Pin Dia., 1/8" Wire Dia. from JOHNSON, C.S.
Permit easy rigging adjustments, and allow masts to be stepped and unstepped easily. The lever is easy to open and close under load and has a quick release pin for security. Working Load Small: 400lb.

Pelican Hook Repair Kit from JOHNSON, C.S.
Repair snap gates for safetyRepair kit for lost or worn latching mechanisms on snap gate hooks.

Stainless-Steel Shroud Cleat from JOHNSON, C.S.
All stainless-steel construction, compatible with your stainless-steel rigging. Will not corrode. The shroud cleat is easily attached to 5/32" through 3/8" dia. wire or rod. Ideal for flag, radar reflector and steaming shape halyards with an eye for attaching a snap shackle.

Large, 3 Holes, 1" Adj. Range, 1/4" Chainplate Pin Dia., 1/8" Wire Dia. from JOHNSON, C.S.
Permit easy rigging adjustments, and allow masts to be stepped and unstepped easily. The lever is easy to open and close under load and has a quick release pin for security. Working Load Small: 400lb.