1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.

"D" Shackle, 3/16" Pin Dia., 7/16" Inside Width, 1/2" Inside Length, 2500lb. Breaking Strength from HARKEN
Stainless-steel, high-resistance "D" shackles.

Pair of Wrap Pins for 1/4" Turnbuckle from C SHERMAN JOHNSON
Wrap pins are Velcro locking devices used to secure turnbuckles without having to bend over the end of the cotter pins.

Small Boat Clevis Pin Kit from JOHNSON, C.S.
Assorted sizes of stainless-steel clevis and cotter pins. Small Boat kit contains 46 pieces ranging from 3/16"–5/16".

Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.

2-3/4"L Small Swivel Bail Shackle, 5/8" Snap, 7/16" Bail, 2645lb. MWL from WICHARD
Highest quality drop-forged 17-4 PH stainless-steel shackles are beautifully polished, with smooth contours. Great strength and reliability.

5"L T20 Snap Shackle, 31/32" Opening, 31/32" Bail, 10,000lb. MWL from TYLASKA
S. -made shackles offer race-ready high performance, one-handed operation and they can be snapped open under load. Large bail size ideal for additional sheets, spinnakers and other multi-line applications. They have a breaking strength of 5,000 lbs and weigh just 2. 2 ounces in the standard bail configuration. Ideal for J-24s, Mumm 30s and similar boats. Tylaska T8 Snap Shackles are perfect for applications requiring high strength and low weight. 5 ounces in the standard bail configuration.

Large Fixed Bail Snap Shackle from WICHARD
All our snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by increasing its elasticity and maximizing the steel's internal strength. A forged snap shackle will deform long before breaking; it will not burst or break suddenly.

Body Width 2", Vertical Clearance 1", Shackle Diameter 5/16" from ABUS LOCK COMPANY
Set your own easy-to-remember combination on these padlocks with four-pin tumblers. You set the combination using the key provided. All brass internal components and a stainless steel shackle for superior corrosion protection. Type: Combination . Combination Type: Reset-able four tumbler . Material: Brass body and internal components, solid stainless shackle .

Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.

3/16''X1-3/16'' Shear Pin from S And J PRODUCTS
Be prepared for the unexpected . We stock a variety of sizes to fit virtually every outboard or outdrive. Consult your owner's manual for sizing. Stainless or brass.

SHEAR PINS 1/8 X 1 1/4 from S And J PRODUCTS
Assorted Sizes.

Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.

Ring Style Car RC-125 from FORESPAR
Separates the up/down and side-to-side motions of the pole to make a bind-free, strong attachment. Shackles are supplied for uphaul/downhaul lines. Stainless steel cheeks, aluminum body and plastic liners. Ring Style Car RC-125 Although a screw-pin stop is supplied, this car is designed to be used with uphaul/downhaul blocks shackled to the bails at each end. Ring ID: 1 5/8". Investment cast stainless steel with plastic liners to reduce friction. Fits UXP and UTR pole end fittings.

Fastpin, 3/8 D X 1.5 SS from SCHAEFER
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.