Welcome! Please Sign-In
Top Sellers
SeaStar Helm Seal Kit from TELEFLEX
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
BayStar Helm Seal Kits from TELEFLEX
BayStar Helm Seal Kits from TELEFLEX
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms . Contains 3 screws, shaft seal and o-ring seal.
P750 Ice Eater, 115V, 25' Cord from POWER HOUSE
P750 Ice Eater, 115V, 25' Cord from POWER HOUSE
The P750 de-ices diameter of approximately 60 feet Prevent damaging ice formation around your boat’s hull with a 3/4 hp energy efficient Ice Eater. Motor is matched with a permanent-split capacitor to ensure quick, high-torque and smooth operation from the single-phase induction motor. Copper, stator motor windings are double-insulated, to guard against water. Internal, hard-faced mechanical seal is itself immersed in dielectric lubricating fluid and protects the motor against water intrusion.
12V Macerator Pump, 14A Draw from SHURFLO
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
Lower Unit Seal Kit from SIERRA
Lower Unit Seal Kit from SIERRA
Lower Unit Seal Kit.
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
White Life Seal Sealant, 2.8oz. Tube from BOAT LIFE
White Life Seal Sealant, 2.8oz. Tube from BOAT LIFE
Better adhesion than silicone—and can be removed without damage to gel-coats Polyurethane and silicone formulated for use on fiberglass. It gives measurably better adhesion than silicone and yet, unlike most polyurethanes, can be removed without damage to gel coats. Fast-curing, low-odor, high-adhesion, non-corrosive and non-sagging. Recommended Usage: Fiberglass, vinyl, ABS, Lexan, metal, glass, wood; above or below water . Cure Time: Tack-free: 20 min. ; Complete cure: 24–36 hrs.
Sure Bail E2 Float Switch from MPI PRODUCTS
Sure Bail E2 Float Switch from MPI PRODUCTS
Electronic float switch starts pumps reliablyFeatures a dependable electronic, solid-state relay switch sealed in a polyurethane foam float. May be operated manually by rotating the external shaft. Activates pump when water level reaches 2" . Deactivates at 1/2" .
Abandon Ship Dry Bag from WEST MARINE
Abandon Ship Dry Bag from WEST MARINE
Store critical safety and survival gear at the ready and keep it protected from wet conditions. Featuring a roll-top dry seal for complete waterproofness, this bag has plenty of room to keep essentials dry, such as a watermaker, EPIRB, instant meals and first aid supplies. Features lanyard, three internal pockets and elastic loops for flares. 30Ltr.
12V Blaster Washdown Pump, 3.5 GPM from SHURFLO
12V Blaster Washdown Pump, 3.5 GPM from SHURFLO
Blast the grimiest decks clean with one of these durable freshwater/saltwater pumps. Positive-displacement three/four chamber diaphragm design is self-priming up to 6' and can run dry without damage. Include 3/4" and 5/8" garden hose adapters. Pro Blaster features higher capacity and a seamless motor shell for enhanced protection in saltwater environments. Suitable for mounting in wet locations. Include fittings and Blaster spray nozzle. Switch Type: Sealed 45psi pressure switch .
SeaFin Teak Oil - Quart from DALY'S SEA FIN
SeaFin Teak Oil - Quart from DALY'S SEA FIN
High-quality penetrating oil dries to a low sheen. Seals and protects interior and exterior wood from moisture and weather.
Pro Baitmaster™ Heavy-Duty Livewell Pump from SHURFLO
Pro Baitmaster™ Heavy-Duty Livewell Pump from SHURFLO
The fast and easy way to change your oil With a sealed switch and splash-proof "Shurcote II" seamless motor shell, this pump thrives in wet environments, such as continuous-duty live well (tanks under 35 gallons) or wash down applications. It features a run-dry capability and is designed to not overheat with extended use. Switch Type: Sealed 45 psi pressure switch . Material: Glass-reinforced nylon body and base-plate . Port Sizes: 1/2" NPS male . Dimensions: 5. 4"H x 5.
MA2 Fire Extinguisher, HFC-227, 250 cu. ft. from FIREBOY XINTEX, INC.
MA2 Fire Extinguisher, HFC-227, 250 cu. ft. from FIREBOY XINTEX, INC.
The fastest and safest way to combat an engine room fire. HFC-227ea agent leaves no residue, unlike dry chemical extinguishers. Constructed of salt-resistant bronze, brass and stainless steel components; tough tempered, corrosion-resistant cylinders and O-ring seals at all critical assembly points. To select a system determine the volume of the engine compartment to be protected in cubic feet and select the model that meets or exceeds the calculated system volume of the engine compartment. ft.
Offset Threaded Shaft Cam Bar from PERKO
Offset Threaded Shaft Cam Bar from PERKO
Spare offset threaded shaft cam bar for your surface mount lock & latch set.
Crack Cure Sealant, 2 OZ. from CAPTAIN TOLLEY S
Crack Cure Sealant, 2 OZ. from CAPTAIN TOLLEY S
Excellent for sealing hairline cracks in gelcoatThis penetrating copolymer sealant is formulated to be so thin that by using capillary action it can find its way inside fine cracks and set to a clear, flexible seal. Use on wood, rubber, glass, metals, fiberglass, Lexan, ceramic and concrete. Formulation: One-part water-based acrylic polymer sealant. Recommended Usage: Fixing leaks in wood, rubber, glass, metal, ceramics, and other materials . until saturated. Color: Milky . Quantity: 2oz.

Lasdrop Shaft Seals Dry-Seal Shaft Seal

Dry-Seal Shaft Seal, 1-3/8", Stern tube: 2" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-138-2
Dry-Seal Shaft Seal, 3", Stern tube: 5-1/2" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-300-512
Dry-Seal Shaft Seal, 2-1/4", Stern tube: 3-1/2" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-312
Dry-Seal Shaft Seal, 2-3/4", Stern tube: 5-1/2" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-234-512
Dry-Seal Shaft Seal, 4", Stern tube: 5" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-400-5
Dry-Seal Shaft Seal, 1-1/4", Stern tube: 3-1/2" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-114-312
Dry-Seal Shaft Seal, 2", Stern tube: 4" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-200-4
Dry-Seal Shaft Seal, 3-1/4", Stern tube: 5" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-314-5
Dry-Seal Shaft Seal, 1-1/2", Stern tube: 2-3/4" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-112-234
Dry-Seal Shaft Seal, 1-1/4", Stern tube: 2-5/8" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-114-258
Dry-Seal Shaft Seal, 1-3/8", Stern tube: 2-3/8" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-138-238
Dry-Seal Shaft Seal, 7/8", Stern tube: 2" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-078-2
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12