Top Sellers
Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.
|
Red/Green (for port, starboard and bi-color nav. lights) from DR. LED
Aqua Signal series 25 navigation lights LED replacement bulbs. 2nm brightness. Base Type: Gold plated dimpled festoon. *Click here for the Dr.
|
LED, 12V 30W from DR. LED
Medium screw-base (Edison E26/E27) LED bulbs offer an energy-saving solution to incandescent lighting. Soothing warm white light. Offer low power draw and ultra-long service life: 50,000 hours. Impact and shock resistant. 8-18V DC. . U. S. made high flux LED. *Click here for the Dr.
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Service Kit for 30124-0000 Bilge Pump, 8 GPM from JABSCO
Kit includes Connecting rod. Diaphragm. Ppulsation dampener. Valve plate. Valve set (inlet and outlet) .
|
Engine Winterizing Kit from WEST MARINE
Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it’s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included.
|
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Flo-Torq II Hub Kit, Mercury 225 EFI fourstroke outboards; Yamaha 225hp 4-stroke outboards, Prop Series B from MERCURY MARINE
Change props faster, cheaper, with Quicksilver's modular hubFlo TorQ II modular propellers let you easily switch props, change pitch, change from aluminum to stainless, or replace a bent propeller. They're a direct replacement for the Michigan XHS hub kits. When large underwater obstruction are encountered, the Delrin sleeve of the Flo-Torq II System is designed to "break away" following impact, ensuring that damage to the engine, engine drive and propeller is kept to a minimum.
|
Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.
|
XA/XAS, Replacement Cam Kit from SPINLOCK
Cam Replacement & Upgrade Kits for XTS Powerclutches.
|
Spares Kit for Whale Gulper 220 Pump from WHALE PUMPS
Parts service and repair kits for Whale Water Systems Units.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
West Marine SOS Kid’s Hybrid Rearming Kit from WEST MARINE
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Impeller Kit 09959K from WICOR/SHERWOOD
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.
|
10077K REPL IMPELLER KIT from WICOR/SHERWOOD
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.
|
|
Led Trailer Light Kits
|
|
Home -> Trailer & Parts -> Trailer Lighting->Submersible, LED Trailer Lighting Kit for Trailers Over 80" Wide
Built to withstand the rigors of trailering and they're submersible!Retrofit your over 80"W trailer with these attractive Hi Count Multi-LED Lights designed with an appealing, high-tech look or use them as replacement lights. They are fully submersible with circuit boards fully encapsulated to provide protection against corrosion and vibration. Kit includes two LED stop/tail/turn lamps, license plate bracket, trailer harness and mounting accessories. Includes new waterproof connector kit.
Part No: 52472-5
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Light Kits->Submersible, LED Trailer Lighting Kit for Trailers Over 80" Wide
Built to withstand the rigors of trailering and they're submersible!Retrofit your over 80"W trailer with these attractive Hi Count Multi-LED Lights designed with an appealing, high-tech look or use them as replacement lights. They are fully submersible with circuit boards fully encapsulated to provide protection against corrosion and vibration. Kit includes two LED stop/tail/turn lamps, license plate bracket, trailer harness and mounting accessories. Includes new waterproof connector kit.
Part No: 52462-5
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Light Kits
Featuring quality without compromise, and designed expressly for West Marine, this complete kit boasts heavy-duty wiring and components similar to those used in the commercial trucking industry the kind that sustain continuous abuse and keep on working, day in and day out. Hardware is heavy-gauge, black powder-coated steel. The Plug-and-Go Modular Wiring Harness is designed to easily connect to your towing vehicle’s lighting receptacle with no splicing required. Two red MicroNova marker lamps.
Part No: 01-6541-05
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Light Kits
Replacement parts for LED Trailer Lights over 80"Fully submersible and designed specifically to fit America’s most popular brands of trailers, these reliable LED lights are a smart choice for trailer upgrades and/or replacement of old-style incandescents. Their sculpted, stylish design meets all DOT/SAE specifications. The left light features an LED license plate illuminator. Lights mount with two mounting studs on 2" centers. Rated to 100,000 hours of service .
Part No: 52712-5
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting
Fully submersible trailer lights fit all major brands Innovative LED Trailer Lights designed specifically to fit America's most popular brand of trailers. These LED lights are great as replacements or as retrofits to give your old trailer an upgrade. Attractive lights have a sculpted, stylish appearance and are fully submersible. The left light features an LED license plate illuminator. 7-5/8"W x 3-3/4"H x 2-3/4"D. Meet all DOT/SAE trailer light specifications.
Part No: 287-4443-7
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Universal Hi Count® LED Under 80" Wide Trailer Lights
Don’t worry about water damage anymore! Cutting edge Hi Count® Multi- LED Lights are the best in our line of trailer lights. They’ll make your old trailer look new with their attractive high-tech look. They are for trailers under 80" wide. Durable high-impact acrylic lens and corrosion-resistant Duramold® housing. Fully submersible. Left hand light features an LED license plate illuminator. Lights mount with two mounting studs on 2" centers. Includes new waterproof connector kit.
Part No: 01-6533-72
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Universal Hi Count® LED Under 80" Wide Trailer Lights
Don’t worry about water damage anymore! Cutting edge Hi Count® Multi- LED Lights are the best in our line of trailer lights. They’ll make your old trailer look new with their attractive high-tech look. They are for trailers under 80" wide. Durable high-impact acrylic lens and corrosion-resistant Duramold® housing. Fully submersible. Left hand light features an LED license plate illuminator. Lights mount with two mounting studs on 2" centers. Includes new waterproof connector kit.
Part No: 01-6532-72
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Pipe-Light Trailer Lights
Convenient Trailer Lights insert onto your existing 2" PVC trailer guide-ons for fast, easy installation. Pipe-Lights last longer and offer better visibility because they are higher up than standard trailer lights and they don't get submerged during launching and loading. Amber reflective tape on light housing aids in backing trailer at night. Each kit contains one pair of Pipe-Lights with 10' wire leads and wire connectors for easy installation.
Part No: 1019
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring
Premium LED trailering lights are fully submersiblePremium LED lights are designed for submersible applications and often used in the fender marker lamp location. Polycarbonate lights are sonically sealed to keep out water and corrosion. Kit includes chrome mounting bracket, two-wire sealed pigtail and PVC grommet to accommodate any mounting location.
Part No: G1512-5
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Universal Hi Count® LED Under 80" Wide Trailer Lights
Don’t worry about water damage anymore! Cutting edge Hi Count® Multi- LED Lights are the best in our line of trailer lights. They’ll make your old trailer look new with their attractive high-tech look. They are for trailers under 80" wide. Durable high-impact acrylic lens and corrosion-resistant Duramold® housing. Fully submersible. Left hand light features an LED license plate illuminator. Lights mount with two mounting studs on 2" centers. Includes new waterproof connector kit.
Part No: 90642
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Universal Hi Count® LED Under 80" Wide Trailer Lights
Don’t worry about water damage anymore! Cutting edge Hi Count® Multi- LED Lights are the best in our line of trailer lights. They’ll make your old trailer look new with their attractive high-tech look. They are for trailers under 80" wide. Durable high-impact acrylic lens and corrosion-resistant Duramold® housing. Fully submersible. Left hand light features an LED license plate illuminator. Lights mount with two mounting studs on 2" centers. Includes new waterproof connector kit.
Part No: 51982-5
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Universal Hi Count® LED Under 80" Wide Trailer Lights
Don’t worry about water damage anymore! Cutting edge Hi Count® Multi- LED Lights are the best in our line of trailer lights. They’ll make your old trailer look new with their attractive high-tech look. They are for trailers under 80" wide. Durable high-impact acrylic lens and corrosion-resistant Duramold® housing. Fully submersible. Left hand light features an LED license plate illuminator. Lights mount with two mounting studs on 2" centers. Includes new waterproof connector kit.
Part No: 51992-5
|
|
|