Top Sellers
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
|
Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
|
Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Stainless-Steel Rub Rail, End, 1"H x 12"L; Requires #8 Screws from TACO PRODUCTS
Fits a wide variety of vinyl profiles Hollow back (marine grade type 304) has concave back to fit rigid vinyl rub rails and provide added protection and chrome-like accent around entire boat. Most widely used stainless-steel inserts fit the largest variety of vinyl profiles on the market. Solid back stainless-steel rub rail provides premium heavy-duty protection and a polished finish for your boat.
|
316 Stainless-Steel Hose Clamp, 7/16" to 11/16", SAE Size 3 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
|
Stainless-Steel Full-Flow Ball Valve, 1/4" Size (NPT) from GROCO
Components include 316 stainless-steel body, 304 stainless-steel handle, PTFE seals and seats.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Cabinet Handle, Stainless Steel Bar 13" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
304 Stainless-Steel Hose Clamp, 3-1/8" to 4", SAE Size 56 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
|
Snap Hook, 4"L, 3300lb. Breaking Strength from WICHARD
Drop-forged from 316L stainless steel for outstanding strength.
|
|
|
Fastpin, 3/8 D X 1.5 SS from SCHAEFER
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
|
|
|
1"W x 8"L Tang from SCHAEFER
High-quality stainless steel tumbled and polished.
|
|
Lewmar V-Series Stainless Steel Windlasses
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses->V-Series Stainless Steel Windlasses
Compact, stainless steel windlasses for power and sail boats feature an elegant, low profile design that conceals a robust, reliable drivetrain. Plus, they deploy rope/chain or all-chain anchor rodes at the touch of a button. The V1/2/3 windlasses now feature FastFit, which makes installation quick and easy and ensures proper drive shaft alignment during installation. All models include breaker, up/down switch, dual direction solenoid and clutch handle. Listed below in 12V. Style: Vertical .
Part No: 6671011108-138
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->V-Series Stainless Steel Windlasses
Compact, stainless steel windlasses for power and sail boats feature an elegant, low profile design that conceals a robust, reliable drivetrain. Plus, they deploy rope/chain or all-chain anchor rodes at the touch of a button. The V1/2/3 windlasses now feature FastFit, which makes installation quick and easy and ensures proper drive shaft alignment during installation. All models include breaker, up/down switch, dual direction solenoid and clutch handle. Listed below in 12V. Style: Vertical .
Part No: 6672211110-139
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses->V-Series Stainless Steel Windlasses
Compact, stainless steel windlasses for power and sail boats feature an elegant, low profile design that conceals a robust, reliable drivetrain. Features manual override and chain release function and a cone clutch for smooth, easy control. The V1/2/3 windlasses now feature FastFit, which makes installation quick and easy and ensures proper drive shaft alignment during installation. All models include breaker, up/down switch, dual direction solenoid and clutch handle. Listed below in 12V.
Part No: 6672021108-138
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses->V-Series Stainless Steel Windlasses
Compact, stainless steel windlasses for power and sail boats feature an elegant, low profile design that conceals a robust, reliable drivetrain. Plus, they deploy rope/chain or all-chain anchor rodes at the touch of a button. The V1/2/3 windlasses now feature FastFit, which makes installation quick and easy and ensures proper drive shaft alignment during installation. All models include breaker, up/down switch, dual direction solenoid and clutch handle. Listed below in 12V. Style: Vertical .
Part No: 6672221110-139
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses->V-Series Stainless Steel Windlasses
Compact, stainless steel windlasses for power and sail boats feature an elegant, low profile design that conceals a robust, reliable drivetrain. Plus, they deploy rope/chain or all-chain anchor rodes at the touch of a button. The V1/2/3 windlasses now feature FastFit, which makes installation quick and easy and ensures proper drive shaft alignment during installation. All models include breaker, up/down switch, dual direction solenoid and clutch handle. Listed below in 12V. Style: Vertical .
Part No: 66910088-143
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses->V-Series Stainless Steel Windlasses
Compact, stainless steel windlasses for power and sail boats feature an elegant, low profile design that conceals a robust, reliable drivetrain. Plus, they deploy rope/chain or all-chain anchor rodes at the touch of a button. The V1/2/3 windlasses now feature FastFit, which makes installation quick and easy and ensures proper drive shaft alignment during installation. All models include breaker, up/down switch, dual direction solenoid and clutch handle. Listed below in 12V. Style: Vertical .
Part No: 6672011108-138
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses->V-Series Stainless Steel Windlasses
Compact, stainless steel windlasses for power and sail boats feature an elegant, low profile design that conceals a robust, reliable drivetrain. Plus, they deploy rope/chain or all-chain anchor rodes at the touch of a button. The V1/2/3 windlasses now feature FastFit, which makes installation quick and easy and ensures proper drive shaft alignment during installation. All models include breaker, up/down switch, dual direction solenoid and clutch handle. Listed below in 12V. Style: Vertical .
Part No: 6671011107-138
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses->V-Series Stainless Steel Windlasses
Compact, stainless steel windlasses for power and sail boats feature an elegant, low profile design that conceals a robust, reliable drivetrain. Features manual override and chain release function and a cone clutch for smooth, easy control. The V1/2/3 windlasses now feature FastFit, which makes installation quick and easy and ensures proper drive shaft alignment during installation. All models include breaker, up/down switch, dual direction solenoid and clutch handle. Listed below in 12V.
Part No: 66910104-145
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses->V-Series Stainless Steel Windlasses
Compact, stainless steel windlasses for power and sail boats feature an elegant, low profile design that conceals a robust, reliable drivetrain. Features manual override and chain release function and a cone clutch for smooth, easy control. The V1/2/3 windlasses now feature FastFit, which makes installation quick and easy and ensures proper drive shaft alignment during installation. All models include breaker, up/down switch, dual direction solenoid and clutch handle. Listed below in 12V.
Part No: 66910096-145
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses->V-Series Stainless Steel Windlasses
Compact, stainless steel windlasses for power and sail boats feature an elegant, low profile design that conceals a robust, reliable drivetrain. Features manual override and chain release function and a cone clutch for smooth, easy control. The V1/2/3 windlasses now feature FastFit, which makes installation quick and easy and ensures proper drive shaft alignment during installation. All models include breaker, up/down switch, dual direction solenoid and clutch handle. Listed below in 12V.
Part No: 66910080-143
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Pro-Series Stainless Steel Windlasses
Spend more time boating and less time anchoring!Efficient and reliable windlasses feature low maintenance, 100% 316 stainless-steel housings for long-lasting protection and durability, especially in salty climates. Permanent magnet motors are coupled to highly efficient spur gear drive trains resulting in a low amp draw, making these horizontal rope/chain units ideal for small boats with limited battery capacity. Includes Switch Gear and installation kit. Style: horizontal. Boats 35' to 40'.
Part No: 6657011108-102
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses->Pro-Series Stainless Steel Windlasses
Spend more time boating and less time anchoring!Efficient and reliable windlasses feature low maintenance, 100% 316 stainless-steel housings for long-lasting protection and durability, especially in salty climates. Permanent magnet motors are coupled to highly efficient spur gear drive trains resulting in a low amp draw, making these horizontal rope/chain units ideal for small boats with limited battery capacity. Includes Switch Gear and installation kit. Style: horizontal. Boats 35' to 40'.
Part No: 6656011107-301
|
|
|
