Top Sellers
303 Aerospace Protectant - Pint from 303 PRODUCTS
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.
|
303 Fabric Cleaner from 303 PRODUCTS
Environmentally-friendly formula safely cleans marine canvassThe only cleaners recommended by and for Sunbrella®. Dilute for spot cleaning. Safely removes even the most difficult stains and rinses residue free. Non-toxic, non-hazardous formula meets or exceeds EPA standards for biodegradability. Quart. Non-toxic, non-hazardous formula meets or exceeds EPA standards for biodegradability. Use to pre-clean marine canvas prior to re-treating. The only cleaner recommended by and for Sunbrella.
|
Fiberglass Cloth - Density (6 OZ), 60"W, Bulk from WEST MARINE
Suitable for a wide variety of building jobsMedium-density (6oz. ) E-glass. Use with polyester or epoxy resin for light building jobs, covering large areas or reinforcement when laying up or repairing a damaged area. Most commonly used fabric for repair and light building jobs. Medium-density (6oz. ) fiberglass cloth is ideal for covering large areas.
|
Gelcoat Restoration Kit from MEGUIARS
Everything you need to rejuvinate and protect your boat's gelcoatAssortment of Meguiar’s fiberglass maintenance products to clean, polish and protect badly oxidized fiberglass. Contains one 16oz. container each of #56 Pure Wax, #49 Heavy-Duty Oxidation Remover and #45 Boat Polish. Complete gelcoat restoration system for your boat.
|
Spider & Bird Stain Remover from STARBRITE
The easy way to remove even hardened spider and bird droppings. Non-toxic, non-abrasive and without any bleach, this formula won’t harm painted surfaces or fiberglass and will not remove waxes or polish—and can be used on fabrics as well. 22oz.
|
Fiberglass Boat Repair and Maintenance - Book from WEST SYSTEM
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
|
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
|
Medium Folding Grapnel Anchor from SEAFIT
Like mushroom anchors, this four-fluke anchor is a safe choice for inflatables - there are no open flukes to puncture fabric. It's easy to store and won't get tangled in other lines on your boat.
|
Type IV Standard Buoyant Cushion - White from KENT
Conventional throwable cushions meet USCG requirements for Type IV PFDs. Comfortable to sit on or to use as a backrest. Durable fabric covers. Heavy polypropylene straps make them easy to throw. Buoyancy: 18 lbs. Dimensions: 15"L x 16"W x 2. 5"H.
|
Kit, 800/900 Vacuum Breaker from SEALAND
Heads need to be properly maintained to ensure proper functioning Genuine Sealand parts Maintenance kitsTreatment kits.
|
G/Flex 655 Resin 4.75 Gal. from WEST SYSTEM
G/flex 655 Thickened Epoxy Adhesive comes with a thickening agent already added. G/flex offers important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. Bonds to wet and damp surfaces G/flex has the ability to glue damp woods.
|
G/Flex 650 Hardener 4.75 Gal. from WEST SYSTEM
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. G/flex offers these important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. .
|
Deluxe Horseshoe Buoy, 40lb. Buoyancy, White, 24" x 24" x 3' from CAL-JUNE
Each Type IV USCG-approved buoy is made of closed-cell foam and covered with a tough, vinyl-coated fabric. The Deluxe Buoy includes a built-in drogue. USCG Type: IV. Configuration: Horseshoe buoy. Material: Closed-cell foam and covered with a tough, vinyl-coated fabric.
|
Queaz-Away Bands from DAVIS INSTRUMENTS
Comfortable, elastic, acupressure wrist bands exert a gentle pressure on wrist points helping many people avoid the discomfort of rough seas or bumpy travel. Safe and easy to use—just slip them on over your wrists and position them for enjoyable travel. Long-lasting fabric is comfortable and washable. Carry case included. One size fits all.
|
|
Maintenance Fabric
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Episize™ Biaxial Fabric
Episize™ Biaxial Fabric for composites, repairs and reinforcing 15oz. non-woven E-Glass fabric. Two layers at a ±45° fiber orientation are held together by a light stitching. For composites, repairs and reinforcing. Achieves high fiber-to-resin ratio with hand wet out. #738 comes with a . 75 oz. /sq. ft. mat backing. Approximately 22 oz.
Part No: 738-20
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Episize™ Glass Fabrics
Ideal for building composite laminates and fiberglass structures Fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abrasion-resistant covering for wooden structures. When wet-out, the 4 and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished. #740 4 oz. - 50" wide x 10 yard or 20 yard rolls. #742 6 oz. - 60" wide x 10 yard or 20 yard rolls. #745 12 oz.
Part No: 740-10
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->303 High Tech Fabric Guard
Excellent protectant for Sunbrella upholstery and breathable foul weather gear The only repellency product recommended by and for Sunbrella. Restores lasting water repellency to marine canvas. Stops leaks and protects against soiling and water and oil-based stains. Resists mildew formation and UV sun damage. Spray on, let dry. One pint treats 75–100 square feet of marine canvas. Also a great choice for fabric upholstery, carpeting and breathable foul-weather gear.
Part No: 30670
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->303 High Tech Fabric Guard
Excellent protectant for Sunbrella upholstery and breathable foul weather gear The only repellency product recommended by and for Sunbrella. Restores lasting water repellency to marine canvas. Stops leaks and protects against soiling and water and oil-based stains. Resists mildew formation and UV sun damage. Spray on, let dry. One pint treats 75–100 square feet of marine canvas. Also a great choice for fabric upholstery, carpeting and breathable foul-weather gear.
Part No: 30650
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->303 High Tech Fabric Guard
Excellent protectant for Sunbrella upholstery and breathable foul weather gear The only repellency product recommended by and for Sunbrella. Restores lasting water repellency to marine canvas. Stops leaks and protects against soiling and water and oil-based stains. Resists mildew formation and UV sun damage. Spray on, let dry. One pint treats 75–100 square feet of marine canvas. Also a great choice for fabric upholstery, carpeting and breathable foul-weather gear.
Part No: 30616
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Episize™ Glass Fabrics
Ideal for building composite laminates and fiberglass structures Fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abrasion-resistant covering for wooden structures. When wet-out, the 4 and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished. #740 4 oz. - 50" wide x 10 yard or 20 yard rolls. #742 6 oz. - 60" wide x 10 yard or 20 yard rolls. #745 12 oz.
Part No: 740-20
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Episize™ Glass Fabrics
Ideal for building composite laminates and fiberglass structures Fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abrasion-resistant covering for wooden structures. When wet-out, the 4 and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished. #740 4 oz. - 50" wide x 10 yard or 20 yard rolls. #742 6 oz. - 60" wide x 10 yard or 20 yard rolls. #745 12 oz.
Part No: 745-30
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Episize™ Glass Fabrics
Ideal for building composite laminates and fiberglass structures Fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abrasion-resistant covering for wooden structures. When wet-out, the 4 and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished. #740 4 oz. - 50" wide x 10 yard or 20 yard rolls. #742 6 oz. - 60" wide x 10 yard or 20 yard rolls. #745 12 oz.
Part No: 745-10
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Episize™ Glass Fabrics
Ideal for building composite laminates and fiberglass structures Fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abrasion-resistant covering for wooden structures. When wet-out, the 4 and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished. #740 4 oz. - 50" wide x 10 yard or 20 yard rolls. #742 6 oz. - 60" wide x 10 yard or 20 yard rolls. #745 12 oz.
Part No: 745-20
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Episize™ Glass Fabrics
Ideal for building composite laminates and fiberglass structures Fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abrasion-resistant covering for wooden structures. When wet-out, the 4 and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished. #740 4 oz. - 50" wide x 10 yard or 20 yard rolls. #742 6 oz. - 60" wide x 10 yard or 20 yard rolls. #745 12 oz.
Part No: 742-20
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes -> Specialty Cleaners->Waterproofing & Fabric Treatment with PTEF
Waterproofs and protects boat and sail covers, bimini tops, tents and clothing. Won’t change fabric feel or color. Adds a protective coating to extend fabric life. Use on canvas, nylon, Sunbrella®–even leather! 22oz.
Part No: 081922
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Fiberglass Cloth->Episize™ Biaxial Fabric
Episize™ Biaxial Fabric for composites, repairs and reinforcing 15oz. non-woven E-Glass fabric. Two layers at a ±45° fiber orientation are held together by a light stitching. For composites, repairs and reinforcing. Achieves high fiber-to-resin ratio with hand wet out. #738 comes with a . 75 oz. /sq. ft. mat backing. Approximately 22 oz.
Part No: 737-20
|
|
|