Top Sellers
Pivoting Self-Launch Bow Roller from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Replacement Delrin Roller, 3" Dia., 3-3/8" Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Replacement Delrin Roller, 2-1/2" Dia., 1-3/4 Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Bow Roller, Fits Sand (Danforth Style), Anchors up to 20 lb., Special Narrow Width (US Only) from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Glasskoter Resin Roller Cover - 9" x 3/8" Nap from CORONA
For epoxy and polyester resinPhenolic core. Woven mohair. 3/8" nap for semi-smooth or 1/8" nap for fine finishes.
|
LP Enamel - Hatteras White, Quart from STERLING
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
|
303 Aerospace Protectant - Pint from 303 PRODUCTS
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.
|
Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
|
Gelcoat Restoration Kit from MEGUIARS
Everything you need to rejuvinate and protect your boat's gelcoatAssortment of Meguiar’s fiberglass maintenance products to clean, polish and protect badly oxidized fiberglass. Contains one 16oz. container each of #56 Pure Wax, #49 Heavy-Duty Oxidation Remover and #45 Boat Polish. Complete gelcoat restoration system for your boat.
|
Striping Tape - Dark Blue, 3/4" from SEAFIT
Premium 2mil. thick vinyl striping tape makes it easy to add a colorful accent to your boat! Made from the same material used in quality custom boat graphics. It will not crack or peel, even in salt water, and the colors last from 5–7 years without fading. It can even be applied below the waterline. It can be bent, waved, and applied around corners. Should you change your mind or decide to update the look of your boat, simply remove the tape–no need to sand or ruin your paint or finish.
|
LetterU - White, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
Europa Pure Badger Brush - 3" from CORONA
For smooth paint and varnish applicationBadger-like bristles have tip “flags” for smooth paint and varnish finishes. For fine finishes. Flagged tips for sharper cutting edge.
|
Bootstripe Tape, 2'' Black from SEAFIT
Great for use along the waterline or as an accent along the gunnelsThese self-adhesive vinyl accent stripes liven up the look of any boat. Vibrant, long lasting colors add just the right touch of pizzazz to your boat's exterior, changing it from drab and ordinary to bright, clean and beautiful. Sold in 50' rolls.
|
Spc Stripe Tape, 2'' Blue from SEAFIT
The easy way to add excitement to your boatAdd these stripes for a vibrant dose of color. A top carrier holds the stripes in alignment during application, ensuring flawless results.
|
|
Maintenance Roller
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Resin Rollers
Handy resin rollers help get the job done rightDurable plastic rollers with ergonomic handles reduce hand fatigue. They work well for multiple-layer laminating jobs. Remove air bubbles and create inside corners with these rollers.
Part No: FR-1307
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->4" Mini Roller Set & Replacement Parts
Great for topsides or tight spacesFor hard to reach places, anti-fouling work or topside jobs. The Mini Roller set includes a foam roller, a 1/2" nap roller, mini frame and tray. Refills are two packs. Rolls where standard rollers won't fit. 1/2" nap for heavy application.
Part No: 35014
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->4" Mini Roller Set & Replacement Parts
Great for topsides or tight spacesFor hard to reach places, anti-fouling work or topside jobs. The Mini Roller set includes a foam roller, a 1/2" nap roller, mini frame and tray. Refills are two packs. Rolls where standard rollers won't fit. 1/2" nap for heavy application.
Part No: 36054
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Paint Brushes, Rollers->Standard Roller Frames
Works great for most jobsFor standard rollers. Threaded for extension handle.
Part No: 37001
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->4" Mini Roller Set & Replacement Parts
Great for topsides or tight spacesFor hard to reach places, anti-fouling work or topside jobs. The Mini Roller set includes a foam roller, a 1/2" nap roller, mini frame and tray. Refills are two packs. Rolls where standard rollers won't fit. 1/2" nap for heavy application.
Part No: 36044
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->4" Mini Roller Set & Replacement Parts
Great for topsides or tight spacesFor hard to reach places, anti-fouling work or topside jobs. The Mini Roller set includes a foam roller, a 1/2" nap roller, mini frame and tray. Refills are two packs. Rolls where standard rollers won't fit. 1/2" nap for heavy application.
Part No: 36065
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Resin Rollers
Handy resin rollers help get the job done rightDurable plastic rollers with ergonomic handles reduce hand fatigue. They work well for multiple-layer laminating jobs. Remove air bubbles and create inside corners with these rollers.
Part No: FR-1305
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Paint Brushes, Rollers->Standard Roller Frames
Works great for most jobsFor standard rollers. Threaded for extension handle.
Part No: 33001
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Resin Rollers
Handy resin rollers help get the job done rightDurable plastic rollers with ergonomic handles reduce hand fatigue. They work well for multiple-layer laminating jobs. Remove air bubbles and create inside corners with these rollers.
Part No: FR-1303
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Paint Brushes, Rollers->Standard Roller Frames
Works great for most jobsFor standard rollers. Threaded for extension handle.
Part No: 39001
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->4" Mini Roller Set & Replacement Parts
Great for topsides or tight spacesFor hard to reach places, anti-fouling work or topside jobs. The Mini Roller set includes a foam roller, a 1/2" nap roller, mini frame and tray. Refills are two packs. Rolls where standard rollers won't fit. 1/2" nap for heavy application.
Part No: 36026
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Paint Brushes, Rollers->Foam Roller Cover
For smooth, lint-free applicationSmooth, lint-free surface for urethanes, varnishes and enamels. Also suitable for epoxies. With phenolic core. Lint-free, non-shedding, minimizes stipple. Solvent-resistant phenolic core.
Part No: 23302
|
|
|