Welcome! Please Sign-In
Top Sellers
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
5/16" BBB Chain, 1900lb. SWL, 7600lb. Breaking Strength, 1.2lb./ft., 550' Standard Pack from ACCO CHAIN
5/16" BBB Chain, 1900lb. SWL, 7600lb. Breaking Strength, 1.2lb./ft., 550' Standard Pack from ACCO CHAIN
Bulk Chain We stock a complete selection of I. standard chain from Acco to fit almost any windlass. chain vendors. When comparing Acco chain to other brands, be sure to ask if other models are “hot-dip. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. BBB is made of low-carbon steel, but has shorter, calibrated links that are designed to be compatible with many windlasses.
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Danik Anchor Hook from SLIDE ANCHOR
Danik Anchor Hook from SLIDE ANCHOR
Perfect for attachment to a bow eye or sand spike, this combo carabiner/ cam cleat eliminates the periodic hassle of correcting and retying your beach or anchor line. Just pass the line through the cam cleat and pull tight. Made of 304 stainless steel. For boats to 6,000lb. that anchor in protected waters. For use with 3/8"-5/8" line, sold separately. Holds up to 8,000lb.
30lb. River Anchor from GREENFIELD PRODUCTS
30lb. River Anchor from GREENFIELD PRODUCTS
Combines the features of a traditional mushroom anchor with flukes for better bottom penetration. PVC coating is easy to clean and won’t scuff your boat. Recommended for use in protected inland waters only.
100' Anchor Rode from MARINETECH PRODUCTS
100' Anchor Rode from MARINETECH PRODUCTS
These super flexible nylon anchor lines are designed for trailerable watercraft up to 26'.
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
1/4" - 5/16" Anchor connector from WEST MARINE
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
Chrome Sand Spike Anchor from MARINETECH PRODUCTS
Chrome Sand Spike Anchor from MARINETECH PRODUCTS
An alternative to more expensive beach and land anchoring devicessimply push this rod into the ground, or use a hammer in firmer soils and attach an anchor line to the attachment loop.
Large Anchor & Rode Bag from WEST MARINE
Large Anchor & Rode Bag from WEST MARINE
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.
Anchor Buddy Mooring Line, Blue from GREENFIELD PRODUCTS
Anchor Buddy Mooring Line, Blue from GREENFIELD PRODUCTS
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.
Anchor Buddy Mooring Line, Black from GREENFIELD PRODUCTS
Anchor Buddy Mooring Line, Black from GREENFIELD PRODUCTS
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.

Manson Racer Anchors, Manson Anchors Manson Racer Anchors

Manson Racer Anchor, 26lb. from MANSON ANCHORS Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Manson Racer Anchors
The Manson Racer is the first anchor on the market specifically tailored for racing yachts of all sizes. This anchor is made from high-tensile aluminium and has been fully welded and anodized ready for use. The Racer is an effective anchor with great weight saving potential. The Manson Racers' hard-wearing stability balls are designed to reduce the width of the lower balance bar. The balls are designed to encourage the anchor to set faster and resist rotation while embedded in the sea floor.
Part No: R12
Manson Racer Anchor, 20lb. from MANSON ANCHORS Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Manson Racer Anchors
The Manson Racer is the first anchor on the market specifically tailored for racing yachts of all sizes. This anchor is made from high-tensile aluminium and has been fully welded and anodized ready for use. The Racer is an effective anchor with great weight saving potential. The Manson Racers' hard-wearing stability balls are designed to reduce the width of the lower balance bar. The balls are designed to encourage the anchor to set faster and resist rotation while embedded in the sea floor.
Part No: R9
Manson Racer Anchor, 24lb. from MANSON ANCHORS Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Manson Racer Anchors
The Manson Racer is the first anchor on the market specifically tailored for racing yachts of all sizes. This anchor is made from high-tensile aluminium and has been fully welded and anodized ready for use. The Racer is an effective anchor with great weight saving potential. The Manson Racers' hard-wearing stability balls are designed to reduce the width of the lower balance bar. The balls are designed to encourage the anchor to set faster and resist rotation while embedded in the sea floor.
Part No: R11
Manson Racer Anchor, 22lb. from MANSON ANCHORS Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Manson Racer Anchors
The Manson Racer is the first anchor on the market specifically tailored for racing yachts of all sizes. This anchor is made from high-tensile aluminium and has been fully welded and anodized ready for use. The Racer is an effective anchor with great weight saving potential. The Manson Racers' hard-wearing stability balls are designed to reduce the width of the lower balance bar. The balls are designed to encourage the anchor to set faster and resist rotation while embedded in the sea floor.
Part No: R10
Manson Racer Anchor, 17lb. from MANSON ANCHORS Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Manson Racer Anchors
The Manson Racer is the first anchor on the market specifically tailored for racing yachts of all sizes. This anchor is made from high-tensile aluminium and has been fully welded and anodized ready for use. The Racer is an effective anchor with great weight saving potential. The Manson Racers' hard-wearing stability balls are designed to reduce the width of the lower balance bar. The balls are designed to encourage the anchor to set faster and resist rotation while embedded in the sea floor.
Part No: R8
Manson Racer Anchor, 15lb. from MANSON ANCHORS Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Manson Racer Anchors
The Manson Racer is the first anchor on the market specifically tailored for racing yachts of all sizes. This anchor is made from high-tensile aluminium and has been fully welded and anodized ready for use. The Racer is an effective anchor with great weight saving potential. The Manson Racers' hard-wearing stability balls are designed to reduce the width of the lower balance bar. The balls are designed to encourage the anchor to set faster and resist rotation while embedded in the sea floor.
Part No: R7
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11