Top Sellers
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
Fuel Filter Only from MERCURY MARINE
1662576 is a kit for gasoline outboard and MerCruiser models, except 1992 MCM 4. 3L Gen II engines equipped with an in-line fuel filter. 1662550 is an individual replacement element. Model 4531430 is located under the cowl on all Mercury/Mariner V6 outboards, up to 1995, and includes black screw-in sensor. Similar 5037320 is under-cowl filter for Mercury/Mariner V6, 1996 and up, with blue screw-in sensor. OMC model replaces OMC# 502905. Fuel Type: Gasoline. Filtering Efficiency: 25 micron .
|
Quicksilver Gear Lube Pump from MERCURY MARINE
Fits all models except Mercury Mariner 2. 2, 4 and 5; Mariner 2, 4, 5, 15, 30, 40 (Japanese origin).
|
Mercury/Mercruiser 76214Q5 New Style Flat Trim Tab Zinc Anode from MERCURY MARINE
Mercury/Mariner 35-300 hp Force 90 & 120 hp 1995 and newer Mercruiser Alpha one generation II Bravo I, II & III.
|
Flush Kit For 2- & 4-Stroke Outboards from MERCURY MARINE
Fits Mercury/Mariner 4 and 5hp 2-stroke outboards and 4, 5 and 6hp 4-stroke outboards.
|
U-Joint and Gimbal Bearing Lube from MERCURY MARINE
Mercury Marine 92-802870Q 1 U-Joint and Gimbal Bearing Lubricant.
|
Anode Kit - 818298Q 1 from MERCURY MARINE
Mercury/MerCruiser Anodes and Anode Kit - VPN - - Description - - Fits - A 31640Q 4 Trim Tab Anode Fits most Mercury/Mariner outboards 35 hp. & above and all MerCruiser except Bravo. & above and all MerCruiser except Bravo. C 806189Q 1 Trim Cylinder Anode Fits Alpha One Gen II drives. D 806190Q 1 Trim Cylinder Anode Fits Bravo I, II, III, X, XR, XZ and Blackhawk drives. F 826134Q Side Pocket Anode Fits Mercury/Mariner 30-300hp outboards, Force 90 & 120hp 1995 and newer outboards.
|
Outboard Oil Filter Wrench from MERCURY MARINE
Fits the replaceable screw-on type canister oil filters found on current Mercury / Mariner 4-Stroke outboards 9.
|
Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
|
|
|
Mercury/Mariner Outboards, 1990-2000, All 2-stroke engines, 2.5-275HP from SELOC PUBLICATIONS
SELOC has been the leading source of how-to information for the marine industry since 1974. Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. This manual covers Mercury/Mariner Outboards, all 2-stroke engines, 2. 5-275HP from 1990-2000. Hundreds of exploded drawings, photographs and tables . Troubleshooting sections .
|
Rochester Carburetor Fuel Filter from MERCURY MARINE
Rochester Carburetor Fuel Filter Fits Rochester 2bbl & 4bbl.
|
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
In-Line Fuel Filter - 5/16 from MERCURY MARINE
An Assortment of Fuel and Carburetor filters for Mercury Engines.
|
Fuel System Treatment & Stabilizer from MERCURY MARINE
Fuel System Treatment & Stabilizer Prevents fresh fuel from degradation and oxidation. 1oz. treats six gallons of fuel. For two-and four-cycle engines. 16oz. plastic bottle.
|
|
Mercury Marine Fuel Line Connectors
|
|
Home -> Engine Systems -> Engine Parts->Fuel Line Connectors
Model 1661529 engine end connector is a twist lock type, and Model 9689498 is a clip-on engine connector that fits a 5/16" fuel line. Model 1661578 is a tank end bayonet style for the older 6. 6gal. fuel tank.
Part No: 22831Q3
|
|
|
|
Home -> Engine Systems -> Engine Parts->Fuel Line Connectors
Model 1661529 engine end connector is a twist lock type, and Model 9689498 is a clip-on engine connector that fits a 5/16" fuel line. Model 1661578 is a tank end bayonet style for the older 6. 6gal. fuel tank.
Part No: 30185Q3
|
|
|
|
Home -> Engine Systems -> Engine Parts->Fuel Line Connectors
Model 1661529 engine end connector is a twist lock type, and Model 9689498 is a clip-on engine connector that fits a 5/16" fuel line. Model 1661578 is a tank end bayonet style for the older 6. 6gal. fuel tank.
Part No: 816856Q3
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004) and a 1/4" hose barb to the tank (18-8055) and a fuel line connector to the engine (18-8085). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium . Fits Force 40 HP and larger (1993 & Newer), Force 9.
Part No: 18-8024EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004), a fuel line connector to the tank (18-8070) and a fuel line connector to the engine (18-8085). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium . Fits Force 40 HP and larger (1993 & Newer), Force 9.
Part No: 18-8025EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004), a fuel line connector to tank (18-8091) and a fuel line connector to engine (18-8085). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium . Fits Force 40 HP and larger (1993 & Newer), Force 9.
Part No: 18-8016EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004), a 1/8" fuel line connector to tank (18-8054) and a 1/4" fuel line connector to engine (18-8055). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium .
Part No: 18-8012EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Has older style small quick connect on engine end and 5/16" NPT threaded fitting on the tank end. Primer bulb is included in the 8ft. (2. 44 m) assembly. Engine end fits Force 5 HP, and fits 9. 9/15HP (1997 & prior), and 25HP (3 cyl. Tank end has fitting for thread in style tank connection or attaching a bayonet. Length: 8' Hose Diameter: 5/16" Silverado 2000 Premium Includes: Primer bulb 5/16" diameter (18-8004) with hose clamps. Female tank end fuel connector (18-8070).
Part No: 18-8010
|
|
|