Fuel Sending Unit Only - 4-24'' Tank from TELEFLEX
Complete kit includes a reliable dash-mount gauge with a black face and white numerals. The triple patented sending unit has an adjustable float arm and U-channel that fits virtually all tanks from 4"-24" deep. Compatible with 12V DC systems with common or insulated ground.

Reed Switch Sending Unit, 18-1/2" Tank Depth from MOELLER
Direct OEM replacements for gasoline applications, calibrated for 240-33 ohm gauges. Stainless steel construction, with gasket and screws included.

Reed Switch Sending Unit, 9" Tank Depth from MOELLER
Direct OEM replacements for gasoline applications, calibrated for 240-33 ohm gauges. Stainless steel construction, with gasket and screws included.

Quicksilver Water Eliminator from MERCURY MARINE
Quicksilver Water Eliminator removes water from your fuel tank. Just clip the unit to the fuel cap and lower into your fuel tank. The unit absorbs any water that it contacts, leaving you with dry fuel. Removing water directly from the fuel helps to prevent a number of service problems related to water contamination including corrosion, algae growth, damaged fuel injectors and carburetors, and power loss.

2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.

Premium Series Fuel Gauge from TELEFLEX
.

Explorer ReliefBand® from ABBOTT LABS
Drug-free, electronic motion sickness relief! The only electronic drug-free, FDA cleared remedy for motion sickness, this medical device utilizes gentle user-controlled electrical stimulation to send messages to your brain that block the signals that cause nausea. Usage is easy—just strap it on the underside of your wrist and adjust to the setting that is most comfortable. No drowsiness or drug like side effects! Features include simple ON/OFF push-button control and five stimulation levels.

Moeller Scepter Topside Marine Fuel Tank with Gauge 3.2 Gallon from MOELLER
Moeller Scepter Topside Marine Fuel Tank Gauge . 3.

12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.

Replacement Cap with Gauge from MOELLER
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.

Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.

Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.

Flo N’ Go Gas Pump from MOELLER
Stop the slosh! Save gas and prevent spills with a precision pump Still filling the fuel tank by pouring from a heavy can into a funnel? Stop the slosh with Moeller's precision Flo'n'Go Pump. Pump gives you more control for clean filling, less spillage, fumes and pollution. NOT available in CARB states due to state restrictions. * Simple, reliable bellows pump. Made of high-density polyethylene plastic. Pumps gas in any direction. NOT available in CARB states due to state restrictions*.

OEM Replacement Fuel Tanks from MOELLER
The OEM’s (Original Equipment Manufacturer’s) choice in lightweight, non-corroding portable fuel tanks! Includes a universal 1/4" NPT fuel pickup adapter and fulfills all your large and small outboard engine needs. Approved for use in Japan, Australia and New Zealand, Canada, ISO and CSA Certified, UL Listed. 21. 25"L x 14"W x 9.

Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".