Top Sellers
Sail Ties, Blue 5FT from WEST MARINE
Sail ties with a clever twistOur premium-quality tubular nylon webbing ties have a clever twist: a sewn loop at one end, with a twist that keeps the eye open so it’s easy to thread even with cold hands. Tie a simple slip knot and you’re done! Color-coded so you can quickly select the size you need.
|
Dacron Sail Repair Tape, 3" x 15' from BAINBRIDGE
Make emergency sail repairs with tough, sticky Dacron tape For temporary, emergency sail repairs. Much tougher, stronger, and stickier than spinnaker repair tape.
|
Dacron Sail Repair Tape, 3" x 150' from BAINBRIDGE
Make emergency sail repairs with tough, sticky Dacron tape For temporary, emergency sail repairs. Much tougher, stronger, and stickier than spinnaker repair tape.
|
|
|
Sail Tie, Ball End 16IN, Blue from STARBRITE
Securing your mainsail to the boom is simpler and quicker when you use sail lashes instead of conventional ties. Dual lengths of durable, UV-resistant polyester plastic cord have polyethylene ball ends with brass stops and damping rings. Color-coded balls.
|
Body Width 2", Vertical Clearance 1", Shackle Diameter 5/16" from ABUS LOCK COMPANY
Set your own easy-to-remember combination on these padlocks with four-pin tumblers. You set the combination using the key provided. All brass internal components and a stainless steel shackle for superior corrosion protection. Type: Combination . Combination Type: Reset-able four tumbler . Material: Brass body and internal components, solid stainless shackle .
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.
|
Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
Fluorescent Sailing Knife from WICHARD
Find this knife in the dark! Half-serrated stainless steel blade cuts heavy materials and composite ropes without dulling. Glow-in-the-dark handle makes it easy to locate. Features a 2-7/8"L locking blade, shackle key, and marlin spike. 7-1/8"L open.
|
Adjustable Height Standard Friction Lock Pedestal Seat, Ribbed Series from GARELICK
Seat raises or lowers, locks at desired height . 2-7/8" (7cm) diameter stanchion tube, 9" (23cm) diameter base plate . Anodized protective finish helps prevent saltwater corrosion and weathering. . 2-7/8" (7cm) diameter ribbed stanchion tube, 9.
|
Outboard Lock - Merc/Mariner (40hp), 1/2" x 20 thread from MCGARD
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting. Comes with two keys. *Fits: OMC 6-30hp, Merc/Mariner 8-25hp, Yamaha 9. 9-40hp, Suzuki 8-13hp.
|
Sail Repair Kit, Right Hand from BAINBRIDGE
Includes adjustable sailmaker's palm, wax, twisted thread, and tube of 10 needles.
|
Flip Lock Drain Plug 1" Stainless from SEAFIT DRAIN
Standard rubber and brass plug fits 1" transom drains on many production boats.
|
|
Oar Lock Sailing Dinghies
|
|
Home -> Boats & Motors -> Dinghies -> Sailing Dinghies->Walker Bay Oar Locks & Accessories
Durable, low-friction nylon/steel reinforced replacement oarlocks.
Part No: 23043
|
|
|
|
|
Home -> Boats & Motors -> Dinghies -> Sailing Dinghies->Walker Bay Oar Locks & Accessories
Durable, low-friction nylon/steel reinforced replacement oarlocks.
Part No: 23042
|
|
|
|
Home -> Boats & Motors -> Dinghies -> Sailing Dinghies->Walker Bay Oar Locks & Accessories
One pair of stainless-steel oarlocks, one pair of stainless-steel sockets and screws.
Part No: 99262
|
|
|
|
Home -> Boats & Motors -> Dinghies -> Rigid Dinghies->Walker Bay 8 & 10 Dinghies
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
Part No: 31321
|
|
|
|
|
Home -> Boats & Motors -> Dinghies -> Rigid Dinghies->Walker Bay 8 & 10 Dinghies
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
Part No: 30321
|
|
|
