Captain s Wheel Hat, Navy from OLD GUYS RULE
OG489 Captain's Wheel Cap - The Captain is Always Right One size.

Rule-Mate 500, 12V, 1.9A Draw, 3/4" Port, 4.5"H x 6"W from RULE INDUSTRIES
The new eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch. After the water is pumped out, another sensor shuts the pump off. The sensor's unique "field effect" technology is programmed to recognize the dielectric constant of water only. It's part of Rule's continuing commitment to preserving our waterway. The pumps are preferred by yachtsmen and commercial fishermen the world over.

Rule-Mate 750, 12V, 2.7A Draw, 3/4" Port, 4.5"H x 6"W from RULE INDUSTRIES
The new eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch. After the water is pumped out, another sensor shuts the pump off. The sensor's unique "field effect" technology is programmed to recognize the dielectric constant of water only. It's part of Rule's continuing commitment to preserving our waterway. The pumps are preferred by yachtsmen and commercial fishermen the world over.

Rule-Mate 1100, 12V, 3.4A Draw, 1-1/8" Port, 4.5"H x 5"W from RULE INDUSTRIES
The new eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch. After the water is pumped out, another sensor shuts the pump off. The sensor's unique "field effect" technology is programmed to recognize the dielectric constant of water only. It's part of Rule's continuing commitment to preserving our waterway. The pumps are preferred by yachtsmen and commercial fishermen the world over.

Rule 8000 Bilge Pump, 24V from RULE INDUSTRIES
Rule's largest capacity submersible pump. Thoughtfully designed, it incorporates two 4000 gph (15140 lph) pumps which discharge through a common 3" (76mm) discharge outlet. Since the two pumps function independently, if one pump fails, the other will continue to operate providing back-up pumping capability. Replacement motor modules available. Flow Rate: 8000 gph 30280 lph . Port Type: 3" (76mm) Hose barb . Voltage: 12 or 24 Vdc . Non-Automatic. 5 amp . Fuse Size: 2 x 25 amp .

Standard Rule from WEEMS And PLATH
These clear acrylic rules combine the features of protractor plotters with basic parallel rules. Deluxe and Standard models are inscribed with full 180 protractor markings. Deluxe model features brass arms. Standard and Value models have brushed aluminum arms. 15"L x 2-3/4"W.

Value Rule from WEEMS And PLATH
These clear acrylic rules combine the features of protractor plotters with basic parallel rules. Deluxe and Standard models are inscribed with full 180 protractor markings. Deluxe model features brass arms. Standard and Value models have brushed aluminum arms. 15"L x 2-3/4"W.

Deluxe Rule from WEEMS And PLATH
These clear acrylic rules combine the features of protractor plotters with basic parallel rules. Deluxe and Standard models are inscribed with full 180 protractor markings. Deluxe model features brass arms. Standard and Value models have brushed aluminum arms. 15"L x 2-3/4"W.

Rule-A-Matic Switch with Fuse from RULE INDUSTRIES
Now features an environmentally friendly design Dependable Silver Tin Oxide contacts have replaced the mercury used in the previous generation of this switch. It features a larger float for increased buoyancy, and a convenient snap-in base that allows easy switch removal for cleaning or inspection. A resilient rubber grommet provides strain relief to the sealed wiring that now exits from the top to keep it dry. Activation Method: Mechanical AgSnO2 contacts. Capacity: 14A @ 12/24/32V DC.

2000gph Rule-Mate, 24V, 4.2A Draw, 1-1/8" Port, 6"H x 7-1/4"W from RULE INDUSTRIES
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.

Rule-A-Matic Plus Float Switch from RULE INDUSTRIES
Is the float switch working? It's easy to check! Features a Rule-A-Matic float switch and an impact-resistant cover to protect against debris and jamming. Wiring is "blocked" by a rubber grommet to provide strain relief. Includes a convenient feature for manual tests. Activation Method: Float with mechanical contacts. Dimensions: 2-3/4"H x 2-1/2"W x 4-7/8"L. Capacity: 20A @ 12/24/32V DC.

Rule-A-Matic Switch from RULE INDUSTRIES
Now features an environmentally friendly design Dependable Silver Tin Oxide contacts have replaced the mercury used in the previous generation of this switch. It features a larger float for increased buoyancy, and a convenient snap-in base that allows easy switch removal for cleaning or inspection. A resilient rubber grommet provides strain relief to the sealed wiring that now exits from the top to keep it dry. Activation Method: Mechanical AgSnO2 contacts. Capacity: 14A @ 12/24/32V DC.

2000gph Rule-Mate, 12V, 8.4A Draw, 1-1/8" Port, 6"H x 7-1/4"W from RULE INDUSTRIES
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.

Mounting Bracket for Rule 360, 500 or 1100 gph Pump from RULE INDUSTRIES
Adds mounting versatility to Rule 360, 500 and 1100gph pumps Allows you to mount a Rule 360, 500, or 1100 gph pump to a vertical stringer or transom.

1500gph Rule-Mate, 12V, 4.8A Draw, 1-1/8" Port, 6"H x 7-1/4"W from RULE INDUSTRIES
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.