Top Sellers
Required Waste/Oil Garbage Placards from WEST MARINE
Get ready for a Coast Guard inspection with required plaquesCoast Guard regulations require these plaques to be displayed on any boat 26' feet and over with an enclosed engine compartment. Adhesive backing. Easy to apply. White text on black background.
|
Mercury/Mercruiser 76214Q5 New Style Flat Trim Tab Zinc Anode from MERCURY MARINE
Mercury/Mariner 35-300 hp Force 90 & 120 hp 1995 and newer Mercruiser Alpha one generation II Bravo I, II & III.
|
Impeller 09-812B - For pump size F6B from JOHNSON PUMPS
More durable, longer lasting replacement pump has a one-piece bronze body and bronze end-plate with a replaceable cam and wear-plate so it can be rebuilt when needed.
|
|
2-4-C Lube W/Teflon - Three 3.5 oz Grease Gun Cartridges from MERCURY MARINE
A high quality multi-purpose lubricant to withstand extreme friction and also improve water resistance.
|
Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
|
Air Filter for Detroit Diesel Engines 671 Natural/Turbo, 8V71 Natural, 12V71 2 Turbo, 6V92 2 Turbo, 8V92 1 Turbo/2 Turbo, 12V92 Natural, All HP, Tapered, 9" x 9" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).
|
Air Filter for Caterpillar Engine 3116, Detroit Diesel Engines 6V92 1 Turbo, 12V92 2 Turbo, All HP, Tapered, 9" x 12" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).
|
Genset AIRSEP® Air Filter from WALKER ENGINEERING
Keep your Genset AIRSEP system running in peak condition with this washable replacement air filter element. Rated for 250 hours between filter cleanings. Washable replacement air filter.
|
In-Line Fuel Filter - 5/16 from MERCURY MARINE
An Assortment of Fuel and Carburetor filters for Mercury Engines.
|
Fuel Filter Only from MERCURY MARINE
1662576 is a kit for gasoline outboard and MerCruiser models, except 1992 MCM 4. 3L Gen II engines equipped with an in-line fuel filter. 1662550 is an individual replacement element. Model 4531430 is located under the cowl on all Mercury/Mariner V6 outboards, up to 1995, and includes black screw-in sensor. Similar 5037320 is under-cowl filter for Mercury/Mariner V6, 1996 and up, with blue screw-in sensor. OMC model replaces OMC# 502905. Fuel Type: Gasoline. Filtering Efficiency: 25 micron .
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .
|
Fuel Filter/Water Separator, 15/35gph Max. Flow, 6"H x 3.2"W x 3.2"D, Metal Bowl from RACOR-PARKER FILTRAT
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
|
|
|
|
|
|
Other Engine Parts Filter
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Glass View In-Line Fuel Filter
Traps dirt and other metallic particles in your outboard fuel, and allows for quick inspection of fuel condition. Die-cast ends are rugged, and filters can be easily removed and replaced. Universal hardware includes 1/4'', 5/16'', and 3/8'' O. D.
Part No: 033318-10
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->In-Line Disposable Fuel Filter
In-line disposable filters trap dirt and other metallic particles. Design allows immediate inspection of your fuel condition through clear vial. Not for use on inboard engines. More than 18 sq. in.
Part No: 033317-10
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Glass View In-Line Fuel Filter
Traps dirt and other metallic particles in your outboard fuel, and allows for quick inspection of fuel condition. Die-cast ends are rugged, and filters can be easily removed and replaced. Universal hardware includes 1/4'', 5/16'', and 3/8'' O. D.
Part No: 033319-10
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->In-Line Disposable Fuel Filter
In-line disposable filters trap dirt and other metallic particles. Design allows immediate inspection of your fuel condition through clear vial. Not for use on inboard engines. More than 18 sq. in.
Part No: 033316-10
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FLK20-6
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FKS75-8
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FKS75-6
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FKS75-12
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FLK20-8
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FLK20-12
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->FUELSEP® Fuel Line Jumpers & 90° Fitting Kits
Installing a FUELSEP® is a snap with these easy to use diesel fuel “jumper” lines. Your engine's fuel line can then be connected directly to the FUELSEP outlet. Each CG-approved fuel hose is 20" and comes complete with JIC-style ends. 90° fittings kits (sold separately, below) are required for complete installation. These 90-degree fitting kits include two fittings, one inlet and one outlet, which fit directly into the FUELSEP unit. –8 = 1/2". –10 = 5/8" .
Part No: FLK20-10
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters
The PFF5510 gasoline fuel filter/water separator replaces standard fuel filters found on most Mercury, Mercruiser, Yamaha, Suzuki, Honda and Tohatsu marine gasonline applications. It fits these popular engine applications with it's 11/16" - 16 center threads and features 10 micron Aquabloc II media to outperform other gasoline fuel filters in inboard or outboard, two or four cycle applications.
Part No: PFF5510
|
|
|
