Top Sellers
Fixed Mount Motor Bracket from GARELICK
A permanent fixed-height mount for an auxiliary or trolling motor. Tough 18-8 stainless steel brackets.
|
Motor Mate Lifting Davit from FORESPAR
The unit stores in its own 31" (787. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for scuba tanks, ice, duffel bags, groceries, etc. The Motor Mate uses a Railfast® mounted ring on the rail and a "toe" on the cockpit coaming directly under the rail. Lightweight, portable, compact . Ideal for lifting outboard motors, sea bags, scuba gear . Lifting capacity: 100 lbs.
|
Rip/Stop Polyester Motor Cover, 125-235 hp from TAYLOR
Our outboard motor covers have been redesigned to better fit the newer cowl sizes and later model engines.
|
Flusher-OB/IO Dual Rect Cups from WEST MARINE
Regular flushing of salt, silt, etc. helps extend your outboard engine‘s life. Clamping the flusher over your engine’s water intake on the lower unit and fresh water from a garden hose is all you need.
|
Flusher, OB/IB Universal Round Cups from WEST MARINE
Regular flushing of salt, silt, etc. helps extend your outboard engine‘s life. Clamping the flusher over your engine’s water intake on the lower unit and fresh water from a garden hose is all you need.
|
Flusher, OB/IB Universal Rectangular Cups from WEST MARINE
Regular flushing of salt, silt, etc. helps extend your outboard engine‘s life. Clamping the flusher over your engine’s water intake on the lower unit and fresh water from a garden hose is all you need.
|
DinghyMate - 3 Gal. Fuel Tank from SCEPTER MANUFACTURIN
Rugged, polyethylene tank mounts on the transom (up to 2 1/2” thick) right under outboard motor of an inflatable boat or dinghy, creating a safer, more spacious environment free from heavy, shifting tanks. The vented tank includes a sturdy carry handle. Fits most outboards and works with smaller aluminum vessels. ISO and CSA Certified. Meets ABYC standards. Dinghy Mate 3Gal. measures 12"H x 6 3/4"W x 23"L. Dinghy Mate 6 Gal.
|
Corrosion Block, 12oz. Aerosol from LEAR CHEMICAL
Stops corrosion on all metalsThis anti-corrosion lubricant/penetrant stops or prevents corrosion on all metals. Its hydrophobic chemistry acts like an "off switch" to prevent dissimilar metal corrosion. Leaves a non-toxic, non-greasy, clean, clear protective film that blocks corrosion in a wide variety of applications, including marine electronics, batteries, circuit panels, standing rigging, fishing gear and inboard or outboard motors. 12oz. aerosol or 32oz.
|
Corrosion Block, 32oz. with Refill Sprayer from LEAR CHEMICAL
Stops corrosion on all metalsThis anti-corrosion lubricant/penetrant stops or prevents corrosion on all metals. Its hydrophobic chemistry acts like an "off switch" to prevent dissimilar metal corrosion. Leaves a non-toxic, non-greasy, clean, clear protective film that blocks corrosion in a wide variety of applications, including marine electronics, batteries, circuit panels, standing rigging, fishing gear and inboard or outboard motors. 12oz. aerosol or 32oz.
|
DinghyMate - 6 Gal. Fuel Tank from SCEPTER MANUFACTURIN
Rugged, polyethylene tank mounts on the transom (up to 2 1/2” thick) right under outboard motor of an inflatable boat or dinghy, creating a safer, more spacious environment free from heavy, shifting tanks. The vented tank includes a sturdy carry handle. Fits most outboards and works with smaller aluminum vessels. ISO and CSA Certified. Meets ABYC standards. Dinghy Mate 3Gal. measures 12"H x 6 3/4"W x 23"L. Dinghy Mate 6 Gal.
|
Replacement Propeller for Torqeedo Electric Outboard from TORQEEDO
A rechargeable lithium-manganese high-performance battery connects to the head of the motor, eliminating the need for heavy batteries and cumbersome connections. It is easy to charge with the included 110V AC charger and lasts up to two hours depending on conditions and energy demand. Due to its unique folding mechanism, the Travel breaks down quickly to pack into the included waterproof carry bag for easy storage. A perfect choice for smaller boats including tenders, dinghies and daysailors.
|
Travel 801S Electric Outboard, 23" Shaft length from TORQEEDO
A rechargeable lithium-manganese high-performance battery connects to the head of the motor, eliminating the need for heavy batteries and cumbersome connections. It is easy to charge with the included 110V AC charger and lasts up to two hours depending on conditions and energy demand. Due to its unique folding mechanism, the Travel breaks down quickly to pack into the included waterproof carry bag for easy storage. A perfect choice for smaller boats including tenders, dinghies and daysailors.
|
Replacement Battery for Travel 801 Electric Outboard from TORQEEDO
A rechargeable lithium-manganese high-performance battery connects to the head of the motor, eliminating the need for heavy batteries and cumbersome connections. It is easy to charge with the included 110V AC charger and lasts up to two hours depending on conditions and energy demand. Due to its unique folding mechanism, the Travel breaks down quickly to pack into the included waterproof carry bag for easy storage. A perfect choice for smaller boats including tenders, dinghies and daysailors.
|
Travel 801L Electric Outboard, 28" Shaft length from TORQEEDO
A rechargeable lithium-manganese high-performance battery connects to the head of the motor, eliminating the need for heavy batteries and cumbersome connections. It is easy to charge with the included 110V AC charger and lasts up to two hours depending on conditions and energy demand. Due to its unique folding mechanism, the Travel breaks down quickly to pack into the included waterproof carry bag for easy storage. A perfect choice for smaller boats including tenders, dinghies and daysailors.
|
Cruise 4.0R Outboard, 48V, 4,000 Watts, 215lb. Thrust, 39.7lb. Weight from TORQEEDO
0R offer the same quiet, emission-free operation as their tiller-equipped cousins. Outstanding innovation includes an integral GPS and throttle console with digital display for battery charge status, estimated remaining range, speed over ground and power consumption—important information that prudent operators want to know! Power is robust, with the Cruise 2. 0R equivalent to a 6hp gas outboard and the Cruise 4. 0R equivalent to a 9. Steering cables sold separately. Prop Size: 12"dia.
|
|
outboard motor bracket
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
This adjustable outboard motor bracket is designed for motors up to 10 hp or 80 lbs. Its heavy-duty, light-weight aluminum is designed for fresh water use on both powerboats and sail boats.
Part No: 55-0022
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
This adjustable outboard motor bracket is also designed for motors up to 20hp or 115 lbs. Its heavy duty, light weight aluminum is designed for fresh water use on both powerboats and sail boats.
Part No: 55-0021
|
|
|
Home -> Engine Systems -> Motor Mounts->Hydra Power-Assisted Outboard Engine Brackets
Designed to accommodate bigger 2 and 4-stroke engines, the heavy duty 1/2" thick structural aluminum extrusion affords effortless operation–it can raise and lower auxiliary engines in less than 20 seconds. Features 12V self-contained marinized hydraulic actuator, aircraft stainless steel hardware and engineered bronze bushings at pivot points, a 2000lb. tensile strength engine safety cable and a triple coat protective finish. Range of Motion Up/Down: 13 1/4" vertical travel .
Part No: 71095:01
|
|
|
Home -> Engine Systems -> Motor Mounts->Hydra Power-Assisted Outboard Engine Brackets
Designed to accommodate bigger 2 and 4-stroke engines, the heavy duty 1/2" thick structural aluminum extrusion affords effortless operation–it can raise and lower auxiliary engines in less than 20 seconds. Features 12V self-contained marinized hydraulic actuator, aircraft stainless steel hardware and engineered bronze bushings at pivot points, a 2000lb. tensile strength engine safety cable and a triple coat protective finish. Range of Motion Up/Down: 13 1/4" vertical travel .
Part No: 71096:01
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.
Part No: 521-100ST
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
Part No: 521-125AL
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts->Outboard Locks
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting. Comes with two keys. *Fits: OMC 6-30hp, Merc/Mariner 8-25hp, Yamaha 9. 9-40hp, Suzuki 8-13hp.
Part No: 74036
|
|
|
Home -> Engine Systems -> Motor Mounts->Rail Mount Outboard Bracket
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.
Part No: WMMNT WMM-2
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts->Outboard Locks
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting. Comes with two keys. *Fits: OMC 6-30hp, Merc/Mariner 8-25hp, Yamaha 9. 9-40hp, Suzuki 8-13hp.
Part No: 74038
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts->Outboard Locks
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting. Comes with two keys. *Fits: OMC 6-30hp, Merc/Mariner 8-25hp, Yamaha 9. 9-40hp, Suzuki 8-13hp.
Part No: 74049
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts->4-Stroke Auxiliary Outboard Brackets
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
Part No: 71090:01
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts->4-Stroke Auxiliary Outboard Brackets
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
Part No: 71091:01
|
|