Welcome! Please Sign-In
Top Sellers
SPST Switch, ON/OFF Positions, No Pilot Light, 2 Screw Terminals from COLE HERSEE
SPST Switch, ON/OFF Positions, No Pilot Light, 2 Screw Terminals from COLE HERSEE
These rocker switches come in several different configurations for panel mounting. Available in illuminated and non-illuminated models, they feature non-glare black matte plastic housings, bezel and actuator, brass screw or blade terminals, and gasket-sealed housings. Snap-in mounting in panels from 0. 093" (2. 36mm) to 0. 187" (4.
Dual Warning Light and Buzzer from COLE HERSEE
Dual Warning Light and Buzzer from COLE HERSEE
Works with oil pressure, temperature, halon extinguishers, etc Use with grounded or ungrounded switches For use with Marine Engine Warning Alarm Kit Steel case measures 1-7/8"D x 1"W x 1-11/32"H Fits panels to 13/64" thick 12V DC .
Fuse Block, 10 Circuit, 3.75"L x 3.4"W x 0.8"H from COLE HERSEE
Fuse Block, 10 Circuit, 3.75"L x 3.4"W x 0.8"H from COLE HERSEE
Recessed fuse contacts, no cover required. Black thermoplastic.
Three Position Ignition Switch, OFF-Ignition-Start Functions from COLE HERSEE
Three Position Ignition Switch, OFF-Ignition-Start Functions from COLE HERSEE
Two position is for engines with a separate starter pushbutton. Three position: Off/Ignition/Start. Four position: Accessory/ Off/Ignition/Start or Off/Run/Push to Choke/Battery-Start (magneto switch). Brass construction, 2 keys supplied. 13/16" dia. mounting hole.
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
3-Way Lighted Rocker Panel Switch from RULE INDUSTRIES
3-Way Lighted Rocker Panel Switch from RULE INDUSTRIES
Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic, off, or manual) with the Rule "fail-safe" spring return to "off" from the "manual" position.
Panel Mount Thermal Circuit Breaker, 50A from BLUE SEA SYSTEMS
Panel Mount Thermal Circuit Breaker, 50A from BLUE SEA SYSTEMS
An economical solution for high amperage loads where dependability is required in marine environments. Waterproof and ignition-protected (conforming to SAE J1171) so these circuit breakers are safe for installation aboard gasoline-powered boats. Ideal for branch circuits, windlasses, inverters and watermakers. False-trip free—designed to trip when subjected to a fault current. Available in panel and surface mounts. Interrupt Rating: 3000A at 12V DC. Voltage Compatibility: 42V DC.
500gph 12V Bilge Pump, 3/4" Port, 1.9A Draw, 2.5A Fuse, 3-1/2"H x 2-3/8"W from RULE INDUSTRIES
500gph 12V Bilge Pump, 3/4" Port, 1.9A Draw, 2.5A Fuse, 3-1/2"H x 2-3/8"W from RULE INDUSTRIES
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Corrosion Block, 12oz. Aerosol from LEAR CHEMICAL
Corrosion Block, 12oz. Aerosol from LEAR CHEMICAL
Stops corrosion on all metalsThis anti-corrosion lubricant/penetrant stops or prevents corrosion on all metals. Its hydrophobic chemistry acts like an "off switch" to prevent dissimilar metal corrosion. Leaves a non-toxic, non-greasy, clean, clear protective film that blocks corrosion in a wide variety of applications, including marine electronics, batteries, circuit panels, standing rigging, fishing gear and inboard or outboard motors. 12oz. aerosol or 32oz.
Ocean Mate I™ SOLAS Vest, Standard from STEARNS
Ocean Mate I™ SOLAS Vest, Standard from STEARNS
Ocean Mate™ I Type I flotation device complies with SOLAS 83 requirements. Minimum of 18 lb. buoyancy (child). Reversible offshore PFD designed for quick donning . 3M Scotchlite Reflective Material SOLAS-grade 6755 on panels . Stackable for easy storage . Heavy-duty stainless steel hardware with an attached SOLAS whistle . Light storage pocket .
Corrosion Block, 32oz. with Refill Sprayer from LEAR CHEMICAL
Corrosion Block, 32oz. with Refill Sprayer from LEAR CHEMICAL
Stops corrosion on all metalsThis anti-corrosion lubricant/penetrant stops or prevents corrosion on all metals. Its hydrophobic chemistry acts like an "off switch" to prevent dissimilar metal corrosion. Leaves a non-toxic, non-greasy, clean, clear protective film that blocks corrosion in a wide variety of applications, including marine electronics, batteries, circuit panels, standing rigging, fishing gear and inboard or outboard motors. 12oz. aerosol or 32oz.
Automatic Generator Starter (AGS) from XANTREX
Automatic Generator Starter (AGS) from XANTREX
AGS works in conjunction with the MS2000 Inverter/Charger, Xantrex System Control Panel and your generator to ensure your house batteries always remain charged. The AGS can start your generator based on battery voltage, state of battery charge, or thermostat level. Programmable quiet times ensure the AGS does not start your generator at inappropriate times. LEDs display AGS status. 3. 8"H x 5. 8"W x 1.
TankWatch® 4 Water/Holding Tank Monitor from SEALAND
TankWatch® 4 Water/Holding Tank Monitor from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.

Panel COLE HERSEE

12V LED Pilot Indicator Light, Red from COLE HERSEE Home -> Electrical -> Meters & Distribution -> Distribution Panels->12V LED Pilot Indicator Lights
Solid-state LED diodes never need replacement. Bright chrome-plated body, bezel, washer and hexnut. Quick connect terminals are polarized for ease of wiring. Fits into panels 0. 020" through 0. 300" thick (0. 5 to 7. 6mm).
Part No: PL-612-R-BP
12V LED Pilot Indicator Light, Green from COLE HERSEE Home -> Electrical -> Meters & Distribution -> Distribution Panels->12V LED Pilot Indicator Lights
Solid-state LED diodes never need replacement. Bright chrome-plated body, bezel, washer and hexnut. Quick connect terminals are polarized for ease of wiring. Fits into panels 0. 020" through 0. 300" thick (0. 5 to 7. 6mm).
Part No: PL-612-G-BP
12V LED Pilot Indicator Light, Blue from COLE HERSEE Home -> Electrical -> Meters & Distribution -> Distribution Panels->12V LED Pilot Indicator Lights
Solid-state LED diodes never need replacement. Bright chrome-plated body, bezel, washer and hexnut. Quick connect terminals are polarized for ease of wiring. Fits into panels 0. 020" through 0. 300" thick (0. 5 to 7. 6mm).
Part No: PL-612-B-BP
Toggle Switch Boot, Black with Brass Mounting Nut from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories->Toggle Switches
All non-corroding construction with moisture-repellent insulators and silver contacts. MOM/M-On denote momentary. Lighted Toggle Swithces: White Off/Red On Chrome-Plated: Single Pole Switches, Off/On positions only Max 10A@12V Fit panels to 1/4" thick Mount in 15/32" dia.
Part No: 81264-BP
Contura Rocker Switch, SPDT On/Off/On from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories->Contura Rocker Switches
Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Mounting Hole Size: 1. 450" x 0.
Part No: 58332-21-BP
Electronic Dimmer Switch from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories
Controls lighting intensity from dim to bright. Fits panels to 29/32" thick. Rated at 4A three wire (load, battery and ground). Packard connector. 1-9/16"dia.
Part No: 74600-02-BP
Rocker Switch Bracket - 2 Switch from COLE HERSEE Mount several rocker switches in a single cutout with these stacking brackets. For example, if you wanted a 3 switch panel, it would require two ends and one middle. Single are 2. 3"H x 1"W and doubles are 2.
Part No: 82159-03-BP
4 Position Sealed Ignition Switch from COLE HERSEE Sealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches. Contact rating: 10A@12V DC, 5A@24V DC. Panel thickness: 3/8".
Part No: 95060-50-BP
SPDT Switch, M-ON/OFF/M-ON Positions, No Pilot Light, 3 Blade Terminals from COLE HERSEE These rocker switches come in several different configurations for panel mounting. Available in illuminated and non-illuminated models, they feature non-glare black matte plastic housings, bezel and actuator, brass screw or blade terminals, and gasket-sealed housings. Snap-in mounting in panels from 0. 093" (2. 36mm) to 0. 187" (4.
Part No: 58027-04-BP
Contura Rocker Switch, SPDT M-On/Off/On from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories->Contura Rocker Switches
Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Mounting Hole Size: 1. 450" x 0.
Part No: 58332-23-BP
Contura Rocker Switch, SPDT M-On/Off/M-On from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories->Contura Rocker Switches
Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Mounting Hole Size: 1. 450" x 0.
Part No: 58332-24-BP
SPST Switch, ON/OFF Positions, 2 Screw Terminals from COLE HERSEE Home -> Electrical -> Switches, Fuses & Accessories -> Switches->Toggle Switches
All non-corroding construction with moisture-repellent insulators and silver contacts. MOM/M-On denote momentary. Lighted Toggle Swithces: White Off/Red On Chrome-Plated: Single Pole Switches, Off/On positions only Max 10A@12V Fit panels to 1/4" thick Mount in 15/32" dia.
Part No: 54100-BP
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11