Bronze Threaded Nipple, 3/4" Pipe, Close Length from GROCO
Bronze plumbing fittings.

Adapter—3/4" BSP Female to 15mm (Qty. 2) from WHALE PUMPS
Just cut the tubing to length and fully push the end into the appropriate fitting. The collet automatically secures the hose. If you ever need to alter the system, the connections can be disassembled and reused. All components are manufactured from nontoxic, food-grade materials and are designed to allow unrestricted flow. To gain the advantages of the Whale system, it is not necessary to replumb your entire boat, as unique adapters enable connection to most boat’s existing plumbing systems.

Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".

Super Sub Pump 650 Auto, 650gph from WHALE PUMPS
With a low-profile design and horizontal or vertical discharge positions, these versatile pumps are a great choice for narrow/low clearance bilges where others just won’t fit. Twist-lock assembly/ disassembly makes these pumps easy to clean. Following on the heels of the original award-winning design of the Super Sub 500, the new Super Sub 650 features a built-in electronic switch and increased capacity of 650gph. Port Size: 3/4" . Built-in Switch: Super Sub 500: No; Super Sub 650: Yes .

Quick Connect Tank Fitting Assembly from WHALE PUMPS
Fitting-QC Tank Assy|Fitting-QC Tank Assy.

Bilge Pro Replacement Motor Cartridge for 500gph Pumps from JOHNSON PUMP
In the event of a problem, replacing your cartridge bilge pump motor is easy— provided you keep one of these on hand. Just pop out the old cartridge and pop in the new. Fit Johnson, West Marine Bilge Pro and Mayfair cartridge-style bilge and livewell pumps.

110V AC Automatic Bilge Pump from RULE INDUSTRIES
The 1800gph pumping capacity and extra-long 24' power cord make this pump great for boats with shore power or protecting basements from flooding during wet weather. Motor and durable housing will last for years on the boat or in the home. 5/8" garden hose adapter. gph: 1800. Draw: 1. 1A@110V AC. Built-In Switch: Yes. Material: Plastic. Dimensions: 7-3/4" x 4-3/4". Port Size: 1-1/8".

Whale Gusher 30, Double Action Twin Diaphragm Pump from WHALE PUMPS
Gusher 30 Pump The Gusher 30 is a double-action pump with twin diaphragms so it will still function if one side becomes clogged. Constructed from epoxy-coated anodized aluminum with a brilliant white finish. Nitrile valves and diaphragms perform well under harsh conditions . Accepts low-resistance 2" hose adapters for maximum performance . 31 GPM @ 70 strokes/min. @ 0 head. . Body: Anodized aluminum .

Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .

500gph 12V Bilge Pump, 1.9A Draw at 12V DC, 3/4" Port, 4"H x 2-3/8"W from RULE INDUSTRIES
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.

Guzzler 500 Surface Mount Bilge Pump from GUZZLER/BOSWORTH
Guzzler 400 and 500 Bilge Pumps Capable of a 12' suction lift and a 12' delivery head. Surface-mount pumps include a fixed, horizontal handle. Thru-deck models include removable, vertical handle and thru-deck mounting plate with cover.

500gph 12V Bilge Pump, 3/4" Port, 1.9A Draw, 2.5A Fuse, 3-1/2"H x 2-3/8"W from RULE INDUSTRIES
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.

Strainer for Round Rule Pump, 2800 - 3700 gph Flow Rate from RULE INDUSTRIES
Original replacement strainer base for your Rule Bilge Pump.

24V Diaphragm Bilge Pump, 10.8gpm, 1" Port from JABSCO
Jabsco Diaphragm Bilge Pumps Self-priming design so you can mount the pump in a convenient location. Each includes a Pumpgard pump strainer (except 10. 8-gpm models). 10.

Hand Bilge Pump, 18" Pump with 24" Hose from WEST MARINE
Easy-to-use manual pumps stow almost anywhereEasy to use hand bilge pumps have no-pinch handles and a removable foot-valve for easy cleaning. Convenient, small size and thin profile make them easy to stow in tight spaces. Unlike many manual pumps, the no-pinch handles allow you to keep pumping without discomfort to your hands. Steel-reinforced pump rod. Removable foot-valve .