Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .

1-1/8" Nylon In-Line Check Valve from GUZZLER/BOSWORTH
Noncorroding nylon.

ABS In-Line Check Valve from BECKSON MARINE INC
For 1-1/2" flexible hose.

Gas Deck Fill Replacement Cap, Locking from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.

Gas Deck Fill Replacement Cap, Plain from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.

Gas Fill & Tank Vent - Black from PERKO
Perko Gas Fill and Tank Vent This ingenious plastic deck fill has a vent with a flame arrestor built right into the fill flange. A flip-up cap eliminates the need for a deck key and no ground wire is required.

Twist Shower, Cold Only from WHALE PUMPS
A refreshing departure from deck shower designs of the past, the innovative Twist offers simple operation in a space-saving, ergonomic design. Spray holes are located in the soft-body handle and a twist of the wrist is all you need to initiate water flow or mix hot with cold. Material: High-impact, glass-filled polypropylene and Nitrile . Dimensions: Side Mount: 4-3/4"dia. x 7-1/2"H (Requires 6"D clearance); Top Mount: 2-5/16"dia. x 7-1/2"D . 2' .

Full-Flow In-Line Ball Valve, 1" NPT from GROCO
These in-line ball valves permit unrestricted flow in all sizes. Each features a compact bronze body, chrome-plated brass ball with Teflon seats for long life, 304 stainless steel handle, bonding attachment screw and a drain plug.

Tee Type Sanitation Hose Fitting, Slip Fitting Thread from SHIELDS RUBBER
Fiberglass-reinforced nylon fittings designed to fit Shields Series 101, 148 and 144 hoses without heating or special tools. Use in sanitation systems, deck drain systems and water tank fill.

Brass Male Pipe-to-Hose, NPT, 1/8" - 5/16" from PLUMBING FITTINGS
Brass Pipe Fittings.

Deck Plate, 3-3/8"dia. x 1-15/16"H, 2,250lb. SWL from SCHAEFER
Swivel base for deck mounting blocks.

Exhaust Flapper Valve - 4" from SIERRA
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.

Above Deck Fuel Tank with Mechanical Vent Gauge (15-Gallon) from MOELLER
Specifcally designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs, this tank provides a positive seal with Moeller-exclusive injection molded 2-1/4" fill neck. The mechanically vented fuel cap is easy to grip and the 90 degree, 1/4 NPT fuel withdrawal elbow rotates 360 degrees, which eliminates fuel hose kinking. Includes an easy-to-read mechanical direct-sight gauge.

Sea-Lect Diverter Y-Valve, 1/2" from GUZZLER/BOSWORTH
Simple and compact, with full-port openings that won’t restrict flow. Epoxy-coated aluminum handles and Delrin bodies.

6" Black Screw In Deck Plate from T-H MARINE
These innovative deck plates provide an attractive, economical way to access horizontal and vertical storage areas. They have two seals and an O-ring for complete waterproofness.