Welcome! Please Sign-In
Top Sellers
Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.
Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.
Boat Guard Self Supporting Cover - 21'-23' Cuddy from TAYLOR
Windshield Screw Cover Foam, 5/8"H x 1-1/4"W x 8'L from TACO PRODUCTS
Windshield Screw Cover Foam, 5/8"H x 1-1/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
Windshield Screw Cover Foam, 1/4"H x 3/4"W x 8'L from TACO PRODUCTS
Windshield Screw Cover Foam, 1/4"H x 3/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
Covered Waterproof Foot Switch from WEST MARINE
Covered Waterproof Foot Switch from WEST MARINE
Hinged safety cover closes over the switch to prevent accidental operation. 150A continuous rating. 4'' dia. Cutout: 2. 5'' dia.
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
Compact Horn w/ Black Cover 10023 from AFI
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
Helmsman Compass Cover from RITCHIE NAVIGATION I
Helmsman Compass Cover from RITCHIE NAVIGATION I
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.
Bottom Support Pole Caps, Non-skid from DR. SHRINK
Bottom Support Pole Caps, Non-skid from DR. SHRINK
Bottom Support Pole Caps Dr. Shrink carries a full line of premium installation supplies to ensure a professional shrinkwrap job from start to finish.
Canvas Cleaner from MEGUIARS
Canvas Cleaner from MEGUIARS
Quickly clean your canvass, with no need to rinseEffectively removes dirt, stains and mildew to restore canvas to its original look and feel. Simply spray and wipe off. No need for water to rinse away. Perfect for boat covers and bimini tops. 16oz. trigger bottle. 16oz.

Pole-Cover Bimini & Cover Hardware

Bimini Support Poles, Adjustable from TAYLOR Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Bimini Support Poles (Pr)
Keep your Bimini up off the gunwales when not in use. A pair of support poles replaces aft tensioning straps. 377820 Adjusts from 28''-48". 271380 is 40" fixed .
Part No: 11995
White Vinyl Bimini - 6'L x 42"H x 73-78"W from TAYLOR Home -> Seating & Covers -> Covers & Biminis -> Bimini Tops->White Vinyl Bimini Tops - 6L X 42H
Shield yourself from the relentless rays of the sun and make your boating more enjoyable with these high-quality, affordable Bimini tops. They are constructed from waterproof, mildew and UV-resistant marine grade white vinyl. Our BoaTop® kits include everything you need for a custom installation including the folding framework, the fabric top, all mounting hardware, and complete instructions. Free Adjustable Bimini Support Pole - View Details. Optional matching storage boot sold separately .
Part No: 62176
Anchorshade II, Black from TAYLOR Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22037
Anchorshade II, Red from TAYLOR Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22033
Anchorshade II, White from TAYLOR Home -> Seating & Covers -> Covers & Biminis -> Bimini Tops->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Pole constructed of tempered steel, which is phosphate-dipped and powder-coated to prevent rusting. Adjustable straps with non-corrosive hardware provide mounting flexibility for nearly all applications.
Part No: 22030
Anchorshade II, Blue from TAYLOR Home -> Seating & Covers -> Covers & Biminis -> Bimini Tops->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Pole constructed of tempered steel, which is phosphate-dipped and powder-coated to prevent rusting. Adjustable straps with non-corrosive hardware provide mounting flexibility for nearly all applications.
Part No: 22031
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12