8-1/2" Hatch Holder, Adjustable, for Hatches to 10lb. from MOONLITE MARINE
Stainless, spring-type holders “pop” into place to hold hatches, doors, table leaves, etc. Easy to install. Adjustable model allows opening between 10° and 80°.

ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.

Bottom Support Pole Caps, Non-skid from DR. SHRINK
Bottom Support Pole Caps Dr. Shrink carries a full line of premium installation supplies to ensure a professional shrinkwrap job from start to finish.

30 Amp Double-Pole Circuit Breaker from ANCOR MARINE
Used with 110V AC main circuits so that both the hot and neutral conductors are disconnected. Same features as single pole breakers. White toggles. Switch Type: Toggle . Voltage Compatibility: 110V AC . Safety Features: Temperature stable, false-trip free . Housing Material: Plastic . Housing Dimensions: 1. 48"W x 2. 00"L x 1. 84"D .

Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.

Ring Style Car RC-125 from FORESPAR
Separates the up/down and side-to-side motions of the pole to make a bind-free, strong attachment. Shackles are supplied for uphaul/downhaul lines. Stainless steel cheeks, aluminum body and plastic liners. Ring Style Car RC-125 Although a screw-pin stop is supplied, this car is designed to be used with uphaul/downhaul blocks shackled to the bails at each end. Ring ID: 1 5/8". Investment cast stainless steel with plastic liners to reduce friction. Fits UXP and UTR pole end fittings.

PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.

Clamp-On Rod Holder - 1 1/4"ID Horizontal, Gold from WEST MARINE
1 1/4IN HORIZONTAL MOUNT.

In-Line Holder, for #12 Wire, for ATC & ATO Fuses, 30A from ANCOR MARINE
Assorted styles to fit your needs.

Rotating Head Decoy Owl™ from DALEN
Even a gentle breeze will cause this Great Horned Owl’s head to bob or turn 360°, giving it a fully realistic and fierce look that will scare off pesky birds. Just fill with sand through the hole in the base, replace included plug and place it on deck. Or, remove the bottom plug and place it on a pole.

Kayaker's Fishing Toolbar from CONFLUENCE HOLDINGS
It's a fisherman's utility belt for your kayakUnique, pre-slotted attachment bar allows you to mount a variety of accessories including rod holders, fishfinders, compasses, GPS units or lights securely to your kayak without having to mount them permanently. Features nylon straps for attaching to most standard deck loops, making it easy set up or remove. It adjusts to fit almost any kayak and can be cut down to match the width of narrower singles. Rubber feet protect and stick to decks.

36" Stabilizer for 30'+ Boat Size from MAGMA PRODUCTS
This proven, hinged wing design operates without noisy flapper valves for quiet anchoring day and night. Sailors can easily suspend the stabilizer from their boat’s boom or spinnaker pole. Powerboaters can deploy it with the optional telescoping, aluminum outrigger. The outrigger includes Dacron support lines, a soft rubber hull pad, and an anodized mounting boot. Stabilizer includes bridle and storage/carry case. Stabilizer measures 36" x 21" when fully open, which creates 756sq.

Recess-Mounted Dry Roll Covered Tissue Holder from OCEANAIR
Watertight design and automatic rewind ensure that your toilet tissue stays dry. Smooth textured ABS plastic. Accepts standard toilet tissue rolls.

Folding Teak Pedestal Table from SEATEAK
Teak tabletop measures 16"W x 25"L closed and 32"W x 25"L open and has a fold-down support leg. A built-in drink holder that accommodates four glasses, or binoculars and two glasses. Clips mount the unit firmly to all pedestal guards, whether expanded or collapsed, so there's no drilling. (Note: the steering post must not protrude beyond the front of pedestal guard or the table will not be able to clip properly to the guard. Includes installation hardware.

Rail Mate Boat Hook Holder from HELM PRODUCTS
.