81cm Fiberglass Seat for RIB 350 Inflatable Boat from WEST MARINE
Inflatable Boat Seats.

Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.

Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.

Inflatable Boat Ladder from GARELICK
Contoured to hug the hull of inflatable boats. Attaches to floorboard or side with 3/8'' line and heavy-duty swivel snap. 1'' dia. anodized aluminum tubing with plastic rungs. Vinyl sleeves protect hull fabric.

Boat Guard Self Supporting Cover - 21'-23' Cuddy from TAYLOR
.

T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.

T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.

Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.

303 Aerospace Protectant - Pint from 303 PRODUCTS
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.

Coastal Comfort Inflatable Life Vest, Manual from WEST MARINE
Enjoy unrestricted movement on the water! Designed for inshore or coastal boating, our new Comfort Series™ Inflatable Vests have a more streamlined and lightweight fit. These compact vests feature a thin profile that won't inhibit your movement and they offer 22. Each vest has 1" chest webbing, a high-tenacity nylon covering and Delrin buckle. All vests have heat-welded yellow chambers that provide 22. Include D-ring, back-up oral inflation tube, one arming cylinder and pin.

Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.

Inflatable Life Vest, Orange from Ultra 4000 Manual/Automatic Inflatable Life Vest
USCG-Approved Type V for use when worn on uninspected commercial vessels less than 40 ft. Approved substitute for a Type II or III PFD only when worn and used in accordance with the owner's manual. High-visibility reflective tape and emergency whistle on bladder . Halkey-Roberts 1F automatic inflator with single point indicator . Automatic inflation when submerged in water; manual inflation by pulling lanyard or by oral tube . Provides 33. Pocket to store extra cylinder or gear and D-ring .

Inflatable Life Vest, Black from Ultra 4000 Manual/Automatic Inflatable Life Vest
USCG-Approved Type V for use when worn on uninspected commercial vessels less than 40 ft. Approved substitute for a Type II or III PFD only when worn and used in accordance with the owner's manual. High-visibility reflective tape and emergency whistle on bladder . Halkey-Roberts 1F automatic inflator with single point indicator . Automatic inflation when submerged in water; manual inflation by pulling lanyard or by oral tube . Provides 33. Pocket to store extra cylinder or gear and D-ring .

Striping Tape - Dark Blue, 3/4" from SEAFIT
Premium 2mil. thick vinyl striping tape makes it easy to add a colorful accent to your boat! Made from the same material used in quality custom boat graphics. It will not crack or peel, even in salt water, and the colors last from 5–7 years without fading. It can even be applied below the waterline. It can be bent, waved, and applied around corners. Should you change your mind or decide to update the look of your boat, simply remove the tape–no need to sand or ruin your paint or finish.

Hydrostatic Inflatable Life Vest without Harness from WEST MARINE
The Hammar 1F auto inflator is maintenance-free for five years and automatically inflates only when submerged in 4" of water. Designed for comfort with a low profile for maximum mobility. Soft neoprene Comfort Collar™ won’t chafe your neck. Patented SecureZip™ closure system breaks open easily when inflated, is easy to repack and stays closed during rigorous activities. Inflation cylinder is inside the bladder to protect against corrosion. Buoyancy: 35lb.