Top Sellers
1'' Transom Drain W/Plug from BECKSON MARINE INC
All-nylon drain and plug with a plastic retainer and O-ring.
|
|
|
Deck Plate Storage Bag - 6" from BECKSON MARINE INC
Deck plates make great dry storage areas that are perfect for storing car keys sunglasses or any item that could be lost overboard. Nylon bag with rigid ring fits neatly into your deck plate and secures the bag. Remove the bag for access below deck or to carry items ashore. 8" bags have draw-string closures. . Fits Beckson deckplates only.
|
|
|
|
|
Holding Clips, 1/4" from BECKSON MARINE INC
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.
|
Single Channel-Mate Glass Channel, 7/16"W from BECKSON MARINE
This window track is ideal for window glass or for installing sliding cabinet doors. Each channel groove is slightly (. 005") narrower than 1/4" window glass so there is positive pressure against the glass at all times. It seals out leaks and prevents glass from rattling. Made of B-FLEX marine plastic, it will not crack or discolor. The elevated slide at the bottom of the channel makes windows or doors easy to open and close. Sold in 8' lengths.
|
C-10 Thermostat Controller from KASCO MARINE INC.
Kasco's NEW C-10 Thermostat Controller is designed to save you money on your electric bills The C-10 differs from our existing C-20 Controller, in that, it only uses Air Temperature to operate the De-Icer. Simply use the dial to set a temperature in which you want the De-Icer to turn on and plug the C-10 into a standard 120V outlet.
|
Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
|
Flip Lock Drain Plug 1" Stainless from SEAFIT DRAIN
Standard rubber and brass plug fits 1" transom drains on many production boats.
|
1-1/2" Elbow Drain, Screened from MARINE EAST
Flush head fits most standard showers and allows complete drainage, decreasing the likelihood of clogging.
|
|
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
|
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
|
|
Rain Drain Opening Ports, Beckson Marine Inc Rain Drain Opening Ports
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Rain Drain Opening Ports
Primarily for installations where cabin sides are inclined at angles greater than 15° from vertical and ports collect rain and spray. These ports have 2" spigots. When trimmed flush and installed in hulls up to 5/8" thick, they drain even when tipped at angles up to 45°. Constructed of strong, white ABS plastic with clear Lexan windows. Use only 100% silicone caulk for installation. Drain even when tipped at angles up to 45°. Constructed of strong ABS plastic. Clear Lexan window.
Part No: P0714DWC-20
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Rain Drain Opening Ports
Primarily for installations where cabin sides are inclined at angles greater than 15° from vertical and ports collect rain and spray. These ports have 2" spigots. When trimmed flush and installed in hulls up to 5/8" thick, they drain even when tipped at angles up to 45°. Constructed of strong, white ABS plastic with clear Lexan windows. Use only 100% silicone caulk for installation. Drain even when tipped at angles up to 45°. Constructed of strong ABS plastic. Clear Lexan window.
Part No: P0414DWC-20
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Ports->Rain Drain Opening Ports
Primarily for installations where cabin sides are inclined at angles greater than 15° from vertical and ports collect rain and spray. These ports have 2" spigots. When trimmed flush and installed in hulls up to 5/8" thick, they drain even when tipped at angles up to 45°. Constructed of strong, white ABS plastic with clear Lexan windows. Use only 100% silicone caulk for installation. Drain even when tipped at angles up to 45°. Constructed of strong ABS plastic. Clear Lexan window.
Part No: P0512DWC-20
|
|
|
