Standard Capacity Boji Water Softener, 5" x 24" from GENOVA PRODUCTS
Softens your water supply, yielding water that tastes fresher, is less corrosive to onboard plumbing and leaves fewer unsightly stains and water spots. Consists of a PVC cylinder containing a special Ion Exchange Resin that attracts hard substances in water (iron, calcium, etc. Complete kit includes the Boji Softener, a prefilter housing with activated carbon filter, 36" hose to connect Boji to prefilter, 3/4" hose fittings to plumb into water supply and molded integral feet.

ARS-5 Advanced Regulator from BALMAR
Simply select one of five preset program choices based on battery type, and the belt size setting that matches your alternator’s drive belt width and alternator output rating. Battery settings include standard and deep-cycle flooded, gel, AGM, and Optima programs. When used with MC-TS-A and MC-TS-B alternator and battery temperature sensors, the ARS-5 ensures even greater charging performance, as well as critical protection for your alternator and batteries. Controls a single alternator only.

Adapter—3/4" BSP Female to 15mm (Qty. 2) from WHALE PUMPS
Just cut the tubing to length and fully push the end into the appropriate fitting. The collet automatically secures the hose. If you ever need to alter the system, the connections can be disassembled and reused. All components are manufactured from nontoxic, food-grade materials and are designed to allow unrestricted flow. To gain the advantages of the Whale system, it is not necessary to replumb your entire boat, as unique adapters enable connection to most boat’s existing plumbing systems.

Bronze Threaded Nipple, 3/4" Pipe, Close Length from GROCO
Bronze plumbing fittings.

Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.

Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".

Required Waste/Oil Garbage Placards from WEST MARINE
Get ready for a Coast Guard inspection with required plaquesCoast Guard regulations require these plaques to be displayed on any boat 26' feet and over with an enclosed engine compartment. Adhesive backing. Easy to apply. White text on black background.

Bait Tank Plumbing Kit from KODIAC
Includes exclusive non-clog drain screen and instructions on how to build three different types of tanks.

Quiet Flush Electric Head, Compact Size Bowl, 12V from JABSCO
The Quiet Flush head features a very quiet flush cycle just like your household toilet. Incorporates a powerful waste water evacuation pump with built-in macerator. Select normal flush or bowl-fill/bowl-empty flush. Water control solenoid valve with anti-siphon breaker to prevent contamination of potable water supply. Includes 6' hose for connecting to the remote mounted solenoid valve and a siphon-breaker assembly. Port Sizes: 3/4" Hose Barb intake, 1" Hose Barb discharge.

Rechargeable Signal Air Horn from TAYLOR
Environmentally safe air horn uses air as a propellant, instead of the traditional gas-filled designs. It's economical too. no more expensive refills to buy. Recharges in seconds with a gas station air pump, air compressor, or any other mechanical compressed air source including hand pumps. Works in all weather extremes and can safely be used or stored near sources of heat. Provides approximately 20 blasts per charge. This loud horn puts out a powerful 120db. Meets all USCG regulations.

5 Gallon CARB Kerosene Square Jerry Can with CRC (Blue) from MOELLER
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.

Guzzler 500 Surface Mount Bilge Pump from GUZZLER/BOSWORTH
Guzzler 400 and 500 Bilge Pumps Capable of a 12' suction lift and a 12' delivery head. Surface-mount pumps include a fixed, horizontal handle. Thru-deck models include removable, vertical handle and thru-deck mounting plate with cover.

Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".

Small Bronze Ball Valves with Brass Ball, 3/8" NPT from APOLLO
Free-floating, chrome-plated brass ball. NPT threads. Stainlesssteel handle. Note: These are for inline, non-saltwater applications.

Service Kit for 30124-0000 Bilge Pump, 8 GPM from JABSCO
Kit includes Connecting rod. Diaphragm. Ppulsation dampener. Valve plate. Valve set (inlet and outlet) .