Series 110 Gasoline Filter Replacement Element from RACOR-PARKER FILTRAT
Gasoline Filter Spin-On Replacement Elements.

Replacement Element for OMC Outboards Only, No Bowl from RACOR-PARKER FILTRAT
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.

XA/XAS, Replacement Cam Kit from SPINLOCK
Cam Replacement & Upgrade Kits for XTS Powerclutches.

Primer Bulb, 1/4" Hose Barb from MOELLER
Primer Bulbs with hose barbs.

Bilge Pro Replacement Motor Cartridge for 500gph Pumps from JOHNSON PUMP
In the event of a problem, replacing your cartridge bilge pump motor is easy— provided you keep one of these on hand. Just pop out the old cartridge and pop in the new. Fit Johnson, West Marine Bilge Pro and Mayfair cartridge-style bilge and livewell pumps.

Red/Green (for port, starboard and bi-color nav. lights) from DR. LED
Aqua Signal series 25 navigation lights LED replacement bulbs. 2nm brightness. Base Type: Gold plated dimpled festoon. *Click here for the Dr.

G4 MR11, Bi-Pin Bulb from DR. LED
Because they produce only a small amount of heat, these highflux bulbs make ideal replacements for most “third degree burn” halogen reading, map and cockpit lights with bi-pin and bayonetstyle bases. Light is soothing and warm with cutting edge internal circuitry and high-quality U. Power consumption is just 1W (less than 0. 08A!) except for three-watt Model 9980111. For forward pointing reading fixtures only. Application: Works with most MR11 fixtures . Amps: 0. 08A (Model 9980111 draws 0.

Double-Contact Bayonet Base Bulbs (2), 15 Watts, 0.63 Amps, 1" Bulb Dia. from PERKO
Standard replacement light bulb used in many navigation lights.

G4 BI-PIN Base, 24V, 10W, 0.42A, 11CP from ANCOR MARINE
Keep spare bulbs handy in case of burnouts or breakage.

G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.

Strainer for Round Rule Pump, 2800 - 3700 gph Flow Rate from RULE INDUSTRIES
Original replacement strainer base for your Rule Bilge Pump.

BK-1 Replacement BilgeKleen Filter from CENTEK INDUSTRIES
We recommend that filters be checked or changed every 3 months.

Tab Assembly from DAVIS INSTRUMENTS
Use these replacement parts for all Windex Wind Indicators.

Replacement 55W Bulb for RCL-100 Spotlight (24V) from ACR ELECTRONICS
Replacement 55W Bulb for RCL-100 Spotlight (24V).

Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.