Top Sellers
Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.
|
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .
|
Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
|
|
Covered Waterproof Foot Switch from WEST MARINE
Hinged safety cover closes over the switch to prevent accidental operation. 150A continuous rating. 4'' dia. Cutout: 2. 5'' dia.
|
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
|
Windshield Screw Cover Foam, 5/8"H x 1-1/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
Windshield Screw Cover Foam, 1/4"H x 3/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
Single Deck Chair Cover, 24"H x 24"W x 22"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Back-to-Back Lounge Chair Seat Cover, 22"H x 50"W x 22"D from TAYLOR
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
|
Guzzler 500 Surface Mount Bilge Pump from GUZZLER/BOSWORTH
Guzzler 400 and 500 Bilge Pumps Capable of a 12' suction lift and a 12' delivery head. Surface-mount pumps include a fixed, horizontal handle. Thru-deck models include removable, vertical handle and thru-deck mounting plate with cover.
|
1/4" Sta-Set X Polyester Double Braid, 2,700lb. Breaking Strength from NEW ENGLAND ROPES
Patented all-polyester braid with parallel core construction and a filament/spun cover for improved handling and greater abrasion resistance. One third less stretch than Sta-Set at only a small price premium. In many applications, Sta-Set X can be used in lieu of expensive racing braids, especially when sized conservatively. Identified by two fine red tracers in the cover forming the characteristic X. Best Use: Cruising boat halyards, spinnaker sheets, guys . Stretch: 1.
|
|
RITCHIE NAVIGATION I Cover
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Accessories for Ritchie Compasses
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
Part No: V-83-C
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Accessories for Ritchie Compasses
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
Part No: EX-0005-2
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Accessories for Ritchie Compasses
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
Part No: SH-0174XSP
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Accessories for Ritchie Compasses
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
Part No: CS04L4V1-2
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Accessories for Ritchie Compasses
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
Part No: N-203-C
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Accessories for Ritchie Compasses
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
Part No: LL-C
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Accessories for Ritchie Compasses
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
Part No: H-741-C
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Accessories for Ritchie Compasses
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
Part No: BN-C
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Accessories for Ritchie Compasses
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
Part No: NC-20
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Accessories for Ritchie Compasses
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
Part No: SH-0195KIT
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Navigator Compasses
The large, 4 1/2" apparent size PowerDamp dial on flat card models is easy to read and rock steady. Precision works are protected by fiberglass-reinforced, high-impact composite cases. The binnacle mount model is housed in brushed stainless steel. All feature PowerDamp cards, sapphire jewels and pivots, internal gimbal, built-in compensator magnets, 45° lubberlines dual 12V DC night lighting and movable sun shields (except BN-202). Apparent Card Dia. Case Material: Reinforced polymer .
Part No: DNP-200
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Navigator Compasses
The large, 4 1/2" apparent size PowerDamp dial on flat card models is easy to read and rock steady. Precision works are protected by fiberglass-reinforced, high-impact composite cases. The binnacle mount model is housed in brushed stainless steel. All feature PowerDamp cards, sapphire jewels and pivots, internal gimbal, built-in compensator magnets, 45° lubberlines dual 12V DC night lighting and movable sun shields (except BN-202). Apparent Card Dia. Case Material: Reinforced polymer .
Part No: FN-203
|
|
|