Top Sellers
Red/Green (for port, starboard and bi-color nav. lights) from DR. LED
Aqua Signal series 25 navigation lights LED replacement bulbs. 2nm brightness. Base Type: Gold plated dimpled festoon. *Click here for the Dr.
|
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
|
Series 40 Ratchet Block, Single/Cleat, 385lb. SWL, 3.4oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. " The newest addition to Ronstans Orbit range of super lightweight, fiber-reinforced blocks. Ideal for sheet applications on dinghies up to 16' and control line applications for small keel boats. There are two styles of Series 40 ratchet blocks. Many of the top Grand Prix Laser sailors are switching to Orbit blocks.
|
Marine Dry Lube from CRC MARINE
Superior dry lubrication for moving or stationary parts. Displaces moisture and inhibits corrosion. Fortified with PTFE to provide a micro-thin film that won’t attract dust or dirt. Dries in seconds. Will not stain sails or clothes. Great for mast track, genoa or traveler T-track, headsail grooves, hinges, zippers, headfoils, and sliders.
|
|
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
Ratchet Orbit Block, Cheek, Counter-Clockwise, 550lb. SWL, 2.7oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. It can be set at a 0 or 90 degree orientation, provides stress-free articulation without allowing the block to over-rotate, and is locked in place with a security clip that doesnt require tools to fit. The Dyneema link is also more compatible with carbon, Dyneema and webbing connection points than steel loop tops or shackles.
|
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
|
Tachometer/System Check (4"), Johnson/Evinrude outboard, 7000RPM from FARIA INSTRUMENTS
For more than 50 years, Faria has lived up to its reputation as a producer of high-quality, long-lasting instruments. The immensely readable and durable instruments in the Euro series feature bold, bright white numerals against a non-glare black background. Sculpted white pointers and low-profile black aluminum bezels make for even greater readability. Features a perimeter-lit black dial and flat glass lens.
|
|
|
Flo-Torq II Hub Kit, Mercury 225 EFI fourstroke outboards; Yamaha 225hp 4-stroke outboards, Prop Series B from MERCURY MARINE
Change props faster, cheaper, with Quicksilver's modular hubFlo TorQ II modular propellers let you easily switch props, change pitch, change from aluminum to stainless, or replace a bent propeller. They're a direct replacement for the Michigan XHS hub kits. When large underwater obstruction are encountered, the Delrin sleeve of the Flo-Torq II System is designed to "break away" following impact, ensuring that damage to the engine, engine drive and propeller is kept to a minimum.
|
Fiberglass Boat Repair and Maintenance - Book from WEST SYSTEM
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
|
|
|
|
Ronstan Series 25 T-Track Traveller System Track
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Series 25 T-Track Traveller System Track
A new "racing" track has 25mm (63/64") stop hole spacing for even more precise control of the car position and sheeting angle. Low profile Lightweight 3/16" countersunk fasteners at 3-15/16" centers.
Part No: RC7251-1.5
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Series 25 T-Track Traveller System Track
A new "racing" track has 25mm (63/64") stop hole spacing for even more precise control of the car position and sheeting angle. Low profile Lightweight 3/16" countersunk fasteners at 3-15/16" centers.
Part No: RC7251-3.0
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Series 25 T-Track Traveller System Track
A new "racing" track has 25mm (63/64") stop hole spacing for even more precise control of the car position and sheeting angle. Low profile Lightweight 3/16" countersunk fasteners at 3-15/16" centers.
Part No: RC7251-0.5A
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Series 25 T-Track Traveller System Track
A new "racing" track has 25mm (63/64") stop hole spacing for even more precise control of the car position and sheeting angle. Low profile Lightweight 3/16" countersunk fasteners at 3-15/16" centers.
Part No: RC7251-2.0
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Series 25 T-Track Traveller System Track
A new "racing" track has 25mm (63/64") stop hole spacing for even more precise control of the car position and sheeting angle. Low profile Lightweight 3/16" countersunk fasteners at 3-15/16" centers.
Part No: RC7251-6.0
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Series 25 T-Track Traveller System Track
A new "racing" track has 25mm (63/64") stop hole spacing for even more precise control of the car position and sheeting angle. Low profile Lightweight 3/16" countersunk fasteners at 3-15/16" centers.
Part No: RC7251-1.0A
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track
Fits Ronstan Series 19 I-Beam & Series 25 T-Track Made from impact-resistant, U. V.
Part No: RC7250-INS
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Series 25 Jib Lead System
Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. Composite jib lead cars continue the design philosophy of the award-winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. Integrated Functionality The clever 2-piece car body is moulded from a composite material that delivers low friction on the alloy track without the need for separate inserts.
Part No: RC72537
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Series 25 Jib Lead System
Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. Composite jib lead cars continue the design philosophy of the award-winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. Integrated Functionality The clever 2-piece car body is moulded from a composite material that delivers low friction on the alloy track without the need for separate inserts.
Part No: RC72504
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Series 25 Jib Lead System
Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. Composite jib lead cars continue the design philosophy of the award-winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. Integrated Functionality The clever 2-piece car body is moulded from a composite material that delivers low friction on the alloy track without the need for separate inserts.
Part No: RC72536
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. Lightweight Composite jib lead cars continue the design philosophy of the award winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. An integrated becket at the forward end of the car suits 2:1 sheet systems and the removable threaded pin allows easy fitting of alternate blocks and accessories.
Part No: RC72540
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Low profile and lightweight Removable attachment pin to suit either Dyneema® Link or a shackle Integrated becket for 2:1 headsail sheet systems.
Part No: RC00030
|
|
|