Top Sellers
1/8''X1-3/16'' Shear Pin from S And J PRODUCTS
Be prepared for the unexpected . We stock a variety of sizes to fit virtually every outboard or outdrive. Consult your owner's manual for sizing. Stainless or brass.
|
5/16" Galvanized Steel Screw Pin Anchor Shackle, 1500lb. SWL from WEST MARINE
Roughly the same strength as proof coil chain of the same size. To prevent accidental opening, always seize the shackle pin with safety wire. For increased strength, use one size larger than the chain, especially with High-Test chain (the pins will still fit). Meet Fed. Spec. RR-C-271b Type IV Class 1.
|
|
|
Pair of Wrap Pins for 1/4" Turnbuckle from C SHERMAN JOHNSON
Wrap pins are Velcro locking devices used to secure turnbuckles without having to bend over the end of the cotter pins.
|
Small Boat Clevis Pin Kit from JOHNSON, C.S.
Assorted sizes of stainless-steel clevis and cotter pins. Small Boat kit contains 46 pieces ranging from 3/16"–5/16".
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
303 Aerospace Protectant - Pint from 303 PRODUCTS
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.
|
303 High Tech Fabric Guard, Pint from 303 PRODUCTS
Excellent protectant for Sunbrella upholstery and breathable foul weather gear The only repellency product recommended by and for Sunbrella. Restores lasting water repellency to marine canvas. Stops leaks and protects against soiling and water and oil-based stains. Resists mildew formation and UV sun damage. Spray on, let dry. One pint treats 75–100 square feet of marine canvas. Also a great choice for fabric upholstery, carpeting and breathable foul-weather gear.
|
Wet/Dry Sandpaper (AO) - P500A-Grit from 3M PRODUCTS
3M Imperial Wetordry Sanding Sheet, 9" x 11" Used in wet sanding, fine featheredging or last final sanding step before priming. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product. 500G.
|
Pro-Pull Tool Only from NATIONAL PRODUCTS
PRO-PULL Kits let you quickly remove 3- and 4-blade propellers from inboard shafts with a 3/4'' to 1 1/8'' diameter. The tool is made of heat-treated steel and features fine-thread screws for tremendous pulling force with very little effort. Kit also includes: Prop nut wrench, stainless cotter pin, brass prop-shaft key. Brass nylock prop nut, waterproof grease, and a rustproof carrying case.
|
101 Polysulfide Marine Sealant - White, 10 OZ from 3M PRODUCTS
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
|
Restorer & Wax - Quart from 3M PRODUCTS
Renews and protects gelcoat in one easy applicationRemoves heavy oxidation, chalking, fading, minor scratches, rust and exhaust stains, while providing protection on fiberglass/gel coat and marine topside paints. Unique formulation combines a rubbing compound with a special blend of waxes that restore shine and protect in one application.
|
Chafe Tape from 3M PRODUCTS
Adhesive-backed cloth chafe tape is made to wrap thimbles, docklines, and other points subject to wear.
|
Cleaner & Wax - Quart from 3M PRODUCTS
One-step processDesigned to remove light-to-medium oxidation, clean, polish and protect fiberglass gel coat and marine topside paints. A unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.
|
|
|
|
S and J PRODUCTS Pin
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->Shear Pins
Be prepared for the unexpected . We stock a variety of sizes to fit virtually every outboard or outdrive. Consult your owner's manual for sizing. Stainless or brass.
Part No: 550071
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Shear Pin Kits
Assorted Sizes.
Part No: 550151
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->Shear Pins
Be prepared for the unexpected . We stock a variety of sizes to fit virtually every outboard or outdrive. Consult your owner's manual for sizing. Stainless or brass.
Part No: 550201
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->Shear Pins
Be prepared for the unexpected . We stock a variety of sizes to fit virtually every outboard or outdrive. Consult your owner's manual for sizing. Stainless or brass.
Part No: 550161
|
|
|
|
Home -> Cordage -> Rigging Products->Turnbuckle, Toggle/Swage
Lengths are measured from bottom of swage hole to pin center.
Part No: TS040808
|
|
|
|
Home -> Cordage -> Rigging Products->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-67
|
|
|
|
Home -> Cordage -> Rigging Products->Stay Adjusters
Knurled nut permits precise, one-handed adjustment. Terminal rod is captive, so it cannot come apart even when fully extended. Jaw and clevis pin at one end; swage stud at the other.
Part No: 12-104
|
|
|
|
Home -> Cordage -> Rigging Products->Toggle Jaws
Can accept some off-axis alignment due to the toggle and clevis pin.
Part No: 25-316
|
|
|
|
Home -> Sailboat -> Rigging Products->T-Bolts with Toggle
316 stainless steel with left hand threads. Length is measured from bottom of cotter hole to center of clevis pin.
Part No: 33-612
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->3 and 4 Blade Prop Removal Kit or Tool
PRO-PULL Kits let you quickly remove 3- and 4-blade propellers from inboard shafts with a 3/4'' to 1 1/8'' diameter. The tool is made of heat-treated steel and features fine-thread screws for tremendous pulling force with very little effort. Kit also includes: Prop nut wrench, stainless cotter pin, brass prop-shaft key. Brass nylock prop nut, waterproof grease, and a rustproof carrying case.
Part No: PPF-101
|
|
|
|
Home -> Cordage -> Rigging Products->Turnbuckle, Toggle/Swage
Lengths are measured from bottom of swage hole to pin center.
Part No: TS061010
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Bimini Top Ball & Socket Fittings
Tired of looking at your old corroded bimini top hardware? Replace it with our 316 Stainless Steel Ball and Socket Fittings by Taco. The ball and socket design allows full rotation of the top frame. Rugged design also makes it quick and easy to fold and remove the frame. Deck hinges include pins and lanyards for secure positioning and quick release. Delrin inserts ensure smooth movement and tight rattle free fit. Fits 7/8", 3/4" and 1" tubing.
Part No: F11-0182-1
|
|
|